ABLIC U.S.A. Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
S-80160ANPF-JDLTFU
Tingnan ang Detalye DataSheets

S-80160ANPF-JDLTFU

Product Overview

Category

The S-80160ANPF-JDLTFU belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

The S-80160ANPF-JDLTFU is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to regulate voltage and efficiently manage power in electronic devices.

Packaging/Quantity

The S-80160ANPF-JDLTFU is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 5.0V
  • Maximum Output Current: 1.0A
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 50µA (typical)

Detailed Pin Configuration

The S-80160ANPF-JDLTFU has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Under-voltage lockout
  • Soft-start function

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size
  • Wide input and output voltage range
  • Multiple built-in protection features
  • Low quiescent current

Disadvantages

  • Limited maximum output current (1.0A)
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The S-80160ANPF-JDLTFU operates based on a switching regulator principle. It uses an internal control circuit to monitor the input voltage and adjust the duty cycle of the internal switch to regulate the output voltage. This allows for efficient power conversion and voltage regulation.

Detailed Application Field Plans

The S-80160ANPF-JDLTFU is widely used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Digital cameras - Portable media players

Detailed and Complete Alternative Models

  • S-80160BNPF-JDLTFU
  • S-80160CNPF-JDLTFU
  • S-80160DNPF-JDLTFU
  • S-80160ENPF-JDLTFU

These alternative models offer similar functionality and characteristics to the S-80160ANPF-JDLTFU, providing options for different voltage and current requirements.

In conclusion, the S-80160ANPF-JDLTFU is a compact and efficient integrated circuit used for voltage regulation and power management in various electronic devices. Its wide input and output voltage range, along with built-in protection features, make it a versatile choice for many applications. However, its limited maximum output current and operating temperature range should be considered when selecting this IC for specific projects.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng S-80160ANPF-JDLTFU sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of S-80160ANPF-JDLTFU in technical solutions:

  1. Q: What is S-80160ANPF-JDLTFU? A: S-80160ANPF-JDLTFU is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the key features of S-80160ANPF-JDLTFU? A: Some key features include low quiescent current, wide input voltage range, built-in overcurrent protection, and high efficiency.

  3. Q: What are the typical applications of S-80160ANPF-JDLTFU? A: S-80160ANPF-JDLTFU is commonly used in battery-powered devices, portable electronics, IoT devices, and other low-power applications.

  4. Q: What is the input voltage range supported by S-80160ANPF-JDLTFU? A: The input voltage range typically supported by S-80160ANPF-JDLTFU is from 2.5V to 6.0V.

  5. Q: Can S-80160ANPF-JDLTFU handle multiple output voltages? A: No, S-80160ANPF-JDLTFU is designed to provide a single regulated output voltage.

  6. Q: Does S-80160ANPF-JDLTFU have any built-in protection features? A: Yes, it has built-in overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Q: What is the maximum output current that S-80160ANPF-JDLTFU can deliver? A: The maximum output current typically supported by S-80160ANPF-JDLTFU is 200mA.

  8. Q: Is S-80160ANPF-JDLTFU suitable for low-power applications? A: Yes, S-80160ANPF-JDLTFU is specifically designed for low-power applications, making it suitable for such use cases.

  9. Q: Can S-80160ANPF-JDLTFU operate in a wide temperature range? A: Yes, S-80160ANPF-JDLTFU can typically operate within a wide temperature range, usually from -40°C to +85°C.

  10. Q: Are there any evaluation boards or reference designs available for S-80160ANPF-JDLTFU? A: Yes, some manufacturers provide evaluation boards and reference designs to help users get started with S-80160ANPF-JDLTFU in their applications.

Please note that the specific details may vary depending on the manufacturer's specifications and datasheets of S-80160ANPF-JDLTFU.