S-80838CNNB-B8XT2G belongs to the category of voltage detectors.
This product is primarily used for detecting and monitoring voltage levels in electronic circuits.
The S-80838CNNB-B8XT2G comes in a small surface-mount package, making it suitable for integration into various electronic devices.
The essence of this product lies in its ability to provide reliable voltage detection and monitoring, ensuring the proper functioning of electronic circuits.
The S-80838CNNB-B8XT2G is typically packaged in reels, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.
The S-80838CNNB-B8XT2G has the following pin configuration:
The S-80838CNNB-B8XT2G operates based on a voltage divider network and a comparator. It compares the input voltage with a reference voltage, triggering the output when the input voltage crosses the detection threshold.
The S-80838CNNB-B8XT2G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Power management circuits - Automotive electronics - Industrial control systems
These alternative models offer similar voltage detection capabilities but may differ in package type, operating temperature range, or other specifications.
Word count: 334 words
Sure! Here are 10 common questions and answers related to the application of S-80838CNNB-B8XT2G in technical solutions:
Q: What is S-80838CNNB-B8XT2G? A: S-80838CNNB-B8XT2G is a specific model of voltage detector IC (integrated circuit) manufactured by a company called "Seiko Instruments." It is commonly used in various technical solutions.
Q: What is the purpose of S-80838CNNB-B8XT2G? A: The purpose of S-80838CNNB-B8XT2G is to detect and monitor voltage levels in electronic circuits or systems. It provides a reliable way to determine if the voltage is within a specified range.
Q: How does S-80838CNNB-B8XT2G work? A: S-80838CNNB-B8XT2G works by comparing the input voltage with a reference voltage. If the input voltage exceeds the reference voltage, it triggers an output signal indicating an overvoltage condition.
Q: What is the operating voltage range of S-80838CNNB-B8XT2G? A: The operating voltage range of S-80838CNNB-B8XT2G is typically between 1.6V and 6.0V.
Q: Can S-80838CNNB-B8XT2G be used for undervoltage detection as well? A: No, S-80838CNNB-B8XT2G is specifically designed for overvoltage detection. For undervoltage detection, a different voltage detector IC should be used.
Q: What is the output type of S-80838CNNB-B8XT2G? A: S-80838CNNB-B8XT2G has an open-drain output type, which means it can sink current when the overvoltage condition is detected.
Q: What is the maximum sinking current capability of S-80838CNNB-B8XT2G? A: The maximum sinking current capability of S-80838CNNB-B8XT2G is typically 100mA.
Q: Can S-80838CNNB-B8XT2G be used in automotive applications? A: Yes, S-80838CNNB-B8XT2G is suitable for automotive applications as it meets the necessary standards and requirements.
Q: Is S-80838CNNB-B8XT2G available in different package types? A: Yes, S-80838CNNB-B8XT2G is available in various package types, such as SOT-23-5 and SC-82AB.
Q: Where can I find more information about the application of S-80838CNNB-B8XT2G? A: You can refer to the datasheet provided by Seiko Instruments or visit their official website for detailed information on the application of S-80838CNNB-B8XT2G.
Please note that the answers provided here are general and may vary depending on specific technical requirements and use cases. It is always recommended to consult the datasheet and relevant documentation for accurate information.