Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
S-80841CLNB-B62T2G

S-80841CLNB-B62T2G

Product Overview

Category

S-80841CLNB-B62T2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage detector in various electronic devices.

Characteristics

  • Voltage detection range: 1.6V to 6.0V
  • Low supply current: 1.0μA (typ.)
  • High-accuracy detection voltage: ±1.0%
  • Built-in delay circuit: 200ms (typ.)
  • Small package size: SOT-23-5

Package and Quantity

The S-80841CLNB-B62T2G is packaged in a SOT-23-5 package. Each package contains one unit of the product.

Essence

The essence of S-80841CLNB-B62T2G lies in its ability to accurately detect voltage levels within a specified range, making it an essential component for ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-80841CLNB-B62T2G is available in a compact SOT-23-5 package. Each package contains one unit of the product.

Specifications

  • Supply Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±1.0%
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 1.0μA (typ.)
  • Delay Time: 200ms (typ.)

Detailed Pin Configuration

The S-80841CLNB-B62T2G has the following pin configuration:

```


| | --| VDD|-- Pin 1: Supply Voltage --| GND|-- Pin 2: Ground --| OUT|-- Pin 3: Output --| -|-- Pin 4: Not Connected --| +|-- Pin 5: Not Connected |____| ```

Functional Features

  • Accurate voltage detection within a specified range
  • Low supply current consumption
  • Built-in delay circuit for stable operation
  • Compact package size for space-constrained applications

Advantages and Disadvantages

Advantages

  • High accuracy in voltage detection
  • Low power consumption
  • Small form factor for easy integration into various devices
  • Built-in delay circuit ensures stable operation

Disadvantages

  • Limited voltage detection range (1.6V to 6.0V)
  • Not suitable for applications requiring higher voltage detection

Working Principles

The S-80841CLNB-B62T2G operates based on the principle of comparing the input voltage with a reference voltage. When the input voltage reaches the detection threshold, the output pin switches from low to high, indicating the detection of the desired voltage level.

Detailed Application Field Plans

The S-80841CLNB-B62T2G finds application in various electronic devices where accurate voltage detection is crucial. Some potential application fields include:

  1. Battery-powered devices: Ensuring proper battery voltage levels for efficient operation.
  2. Power management systems: Monitoring voltage levels to prevent overvoltage or undervoltage conditions.
  3. Consumer electronics: Voltage detection for power supply control and protection circuits.
  4. Industrial automation: Monitoring voltage levels in control systems to ensure reliable operation.

Detailed and Complete Alternative Models

  1. S-80840CLNB-B62T2G: Similar to S-80841CLNB-B62T2G but with a different detection voltage range (1.3V to 6.0V).
  2. S-80842CLNB-B62T2G: Similar to S-80841CLNB-B62T2G but with a different detection voltage range (1.8V to 6.0V).
  3. S-80843CLNB-B62T2G: Similar to S-80841CLNB-B62T2G but with a different detection voltage range (2.0V to 6.0V).

These alternative models provide flexibility in voltage detection range, allowing for customization based on specific application requirements.

In conclusion, the S-80841CLNB-B62T2G is an integrated circuit used for accurate voltage detection in various electronic devices. Its compact size, low power consumption, and high accuracy make it a valuable component in many applications. However, its limited voltage detection range and lack of suitability for higher voltage applications are notable limitations.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng S-80841CLNB-B62T2G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of S-80841CLNB-B62T2G in technical solutions:

1. What is the purpose of S-80841CLNB-B62T2G? - S-80841CLNB-B62T2G is a voltage detector IC that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

2. What is the operating voltage range of S-80841CLNB-B62T2G? - The operating voltage range of S-80841CLNB-B62T2G is typically between 1.6V and 6.0V.

3. How does S-80841CLNB-B62T2G detect voltage drops? - S-80841CLNB-B62T2G uses an internal voltage reference and a comparator to monitor the input voltage. When the voltage drops below the specified threshold, it triggers the reset signal.

4. Can S-80841CLNB-B62T2G be used in battery-powered applications? - Yes, S-80841CLNB-B62T2G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

5. What is the typical reset output delay time of S-80841CLNB-B62T2G? - The typical reset output delay time of S-80841CLNB-B62T2G is around 200ms.

6. Is S-80841CLNB-B62T2G suitable for automotive applications? - Yes, S-80841CLNB-B62T2G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

7. Can S-80841CLNB-B62T2G be used in industrial control systems? - Absolutely, S-80841CLNB-B62T2G is commonly used in industrial control systems to monitor and reset microcontrollers or other critical components.

8. Does S-80841CLNB-B62T2G have any built-in protection features? - Yes, S-80841CLNB-B62T2G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

9. What is the package type of S-80841CLNB-B62T2G? - S-80841CLNB-B62T2G is available in a compact SOT-23-5 package.

10. Can multiple S-80841CLNB-B62T2G devices be used in parallel for redundancy? - Yes, multiple S-80841CLNB-B62T2G devices can be used in parallel to provide redundancy and enhance system reliability.

Please note that these answers are general and may vary depending on the specific application and requirements.