S-80843CLNB-B64T2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80843CLNB-B64T2G is packaged in a B64T2G package, which is a small surface-mount package designed for easy integration into electronic circuits.
The essence of S-80843CLNB-B64T2G lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
This product is typically available in reels containing a specific quantity of units, such as 3000 pieces per reel.
The S-80843CLNB-B64T2G has the following pin configuration:
The S-80843CLNB-B64T2G operates by continuously monitoring the input voltage. When the voltage falls below the programmed threshold, the active low reset output is triggered, indicating the need for a system reset.
The S-80843CLNB-B64T2G finds applications in various electronic devices where voltage monitoring and reset functions are crucial. Some potential application fields include:
These alternative models can be considered based on specific application requirements and design constraints.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of S-80843CLNB-B64T2G in technical solutions:
Question: What is the operating voltage range of S-80843CLNB-B64T2G?
Answer: The operating voltage range of S-80843CLNB-B64T2G is typically between 2.2V and 6.0V.
Question: What is the maximum output current that can be sourced by S-80843CLNB-B64T2G?
Answer: S-80843CLNB-B64T2G can source a maximum output current of 100mA.
Question: Can S-80843CLNB-B64T2G be used as a voltage regulator?
Answer: Yes, S-80843CLNB-B64T2G is a voltage detector with a built-in delay circuit and can be used as a voltage regulator.
Question: What is the typical quiescent current consumption of S-80843CLNB-B64T2G?
Answer: The typical quiescent current consumption of S-80843CLNB-B64T2G is 1.0µA.
Question: Does S-80843CLNB-B64T2G have an open-drain output?
Answer: Yes, S-80843CLNB-B64T2G has an open-drain output configuration.
Question: Can S-80843CLNB-B64T2G be used in automotive applications?
Answer: Yes, S-80843CLNB-B64T2G is AEC-Q100 qualified and suitable for automotive applications.
Question: What is the temperature range within which S-80843CLNB-B64T2G can operate?
Answer: S-80843CLNB-B64T2G can operate within a temperature range of -40°C to +85°C.
Question: Does S-80843CLNB-B64T2G have built-in overvoltage protection?
Answer: No, S-80843CLNB-B64T2G does not have built-in overvoltage protection. Additional external circuitry may be required for overvoltage protection.
Question: Can S-80843CLNB-B64T2G be used in battery-powered applications?
Answer: Yes, S-80843CLNB-B64T2G has low quiescent current consumption and is suitable for battery-powered applications.
Question: What is the package type of S-80843CLNB-B64T2G?
Answer: S-80843CLNB-B64T2G is available in a SOT-23-5 package.
Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.