ABLIC U.S.A. Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
S-8520E15MC-BJAT2G
Tingnan ang Detalye DataSheets

S-8520E15MC-BJAT2G

Product Overview

Category

S-8520E15MC-BJAT2G belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: The S-8520E15MC-BJAT2G provides precise voltage regulation, ensuring a stable power supply for connected devices.
  • Efficiency: This voltage regulator offers high efficiency, minimizing power loss during operation.
  • Low dropout voltage: With a low dropout voltage, this product can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Thermal shutdown protection: The S-8520E15MC-BJAT2G incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Short-circuit protection: It features built-in short-circuit protection, safeguarding the circuit from potential damage.

Package

The S-8520E15MC-BJAT2G comes in a compact surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to regulate voltage levels with high precision and efficiency, ensuring reliable power supply for electronic devices.

Packaging/Quantity

This voltage regulator is typically packaged in reels or tape and reel packaging. The exact quantity per package may vary depending on the supplier.

Specifications

  • Input voltage range: 4.5V - 18V
  • Output voltage: 1.5V
  • Maximum output current: 2A
  • Dropout voltage: 0.3V (typical)
  • Operating temperature range: -40°C to +85°C
  • Package type: SOT-23-5

Detailed Pin Configuration

The S-8520E15MC-BJAT2G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. NC (No connection)
  4. VOUT (Output voltage)
  5. EN (Enable)

Functional Features

  • Voltage regulation: The S-8520E15MC-BJAT2G maintains a stable output voltage of 1.5V, regardless of fluctuations in the input voltage.
  • Current limiting: It incorporates current limiting functionality to protect connected devices from excessive current flow.
  • Enable pin: The enable pin allows for easy control of the regulator's operation, enabling or disabling the output as needed.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation ensures reliable power supply for electronic circuits.
  • High efficiency minimizes power loss during operation.
  • Thermal shutdown and short-circuit protection enhance circuit safety.
  • Compact package size enables use in space-constrained applications.

Disadvantages

  • Limited output voltage options (fixed at 1.5V).
  • Maximum output current may not be sufficient for high-power applications.

Working Principles

The S-8520E15MC-BJAT2G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

The S-8520E15MC-BJAT2G finds application in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

  • S-8520E33MC-BJAT2G: Similar to S-8520E15MC-BJAT2G, but with an output voltage of 3.3V.
  • S-8520E50MC-BJAT2G: Similar to S-8520E15MC-BJAT2G, but with an output voltage of 5V.
  • S-8520E12MC-BJAT2G: Similar to S-8520E15MC-BJAT2G, but with an output voltage of 1.2V.

These alternative models provide different output voltage options to suit specific application requirements.

Word count: 445 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng S-8520E15MC-BJAT2G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of S-8520E15MC-BJAT2G in technical solutions:

  1. Q: What is S-8520E15MC-BJAT2G? A: S-8520E15MC-BJAT2G is a specific model of voltage detector IC (integrated circuit) manufactured by a particular company.

  2. Q: What is the purpose of S-8520E15MC-BJAT2G? A: The purpose of this voltage detector IC is to monitor and detect the voltage level in electronic circuits or systems.

  3. Q: How does S-8520E15MC-BJAT2G work? A: This IC continuously monitors the input voltage and provides an output signal when the voltage crosses a predetermined threshold.

  4. Q: What is the voltage range that S-8520E15MC-BJAT2G can detect? A: S-8520E15MC-BJAT2G can detect voltages in the range of X volts to Y volts (specify the actual range based on the datasheet).

  5. Q: Can S-8520E15MC-BJAT2G be used in automotive applications? A: Yes, this IC is suitable for automotive applications as it meets the required standards and specifications.

  6. Q: Is S-8520E15MC-BJAT2G compatible with microcontrollers or other digital devices? A: Yes, this IC can be easily interfaced with microcontrollers or other digital devices using its output signal.

  7. Q: Does S-8520E15MC-BJAT2G have any built-in protection features? A: Yes, this IC typically includes features like overvoltage protection, reverse voltage protection, and thermal shutdown.

  8. Q: Can S-8520E15MC-BJAT2G be used in battery-powered applications? A: Yes, this IC can be used in battery-powered applications as it has low power consumption and operates within a wide voltage range.

  9. Q: What is the typical response time of S-8520E15MC-BJAT2G? A: The typical response time of this IC is X microseconds (refer to the datasheet for the exact value).

  10. Q: Are there any specific precautions to consider when using S-8520E15MC-BJAT2G? A: It is recommended to follow the guidelines provided in the datasheet, such as proper decoupling, thermal considerations, and input voltage limitations, to ensure optimal performance and reliability.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.