Tingnan ang mga detalye para sa mga detalye ng produkto.
AT25DN512C-SSHFGP-T
Product Overview
Category
The AT25DN512C-SSHFGP-T belongs to the category of Serial NOR Flash Memory.
Use
It is used for storing program code and data in various electronic devices such as microcontrollers, IoT devices, and consumer electronics.
Characteristics
- High-speed read operations
- Low power consumption
- Wide voltage range
- Small form factor
- Reliable data retention
Package
The AT25DN512C-SSHFGP-T is available in a compact package suitable for surface mount technology (SMT) assembly.
Essence
The essence of this product lies in its ability to provide non-volatile memory storage with high performance and reliability.
Packaging/Quantity
The AT25DN512C-SSHFGP-T is typically supplied in tape and reel packaging with a specific quantity per reel, as per the manufacturer's specifications.
Specifications
- Capacity: 512 Megabits (64 Megabytes)
- Interface: Serial Peripheral Interface (SPI)
- Operating Voltage: 1.7V to 3.6V
- Operating Temperature Range: -40°C to 85°C
- Data Retention: 20 years
- Erase/Program Cycles: 100,000 cycles
Detailed Pin Configuration
The detailed pin configuration of the AT25DN512C-SSHFGP-T includes the following pins: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input/Output (IO) 4. Hold (HOLD) 5. Write Protect (/WP) 6. Power Supply (VCC) 7. Ground (GND)
Functional Features
- Fast Read and Program Operations
- Flexible Erase Capabilities
- Software and Hardware Protection
- Deep Power-down Mode for Ultra-low Power Consumption
- Overclocking Support for Enhanced Performance
Advantages
- High-speed data transfer
- Low power consumption
- Secure data protection features
- Compact form factor
- Wide operating voltage range
Disadvantages
- Limited capacity compared to other storage options
- Higher cost per bit compared to larger capacity memories
Working Principles
The AT25DN512C-SSHFGP-T operates on the principle of using an SPI interface to communicate with the host microcontroller or system. It utilizes non-volatile memory cells to store data and program code, allowing for reliable and fast access during system operation.
Detailed Application Field Plans
The AT25DN512C-SSHFGP-T is well-suited for use in a wide range of applications including: - Embedded systems - Internet of Things (IoT) devices - Automotive electronics - Industrial control systems - Wearable devices - Smart home appliances
Detailed and Complete Alternative Models
Some alternative models to the AT25DN512C-SSHFGP-T include: - W25Q512JVSIQ (Winbond) - S25FL512SAGMFI011 (Cypress) - MX25R51323FZUIH0 (Macronix)
In conclusion, the AT25DN512C-SSHFGP-T offers high-performance serial NOR flash memory capabilities suitable for various electronic applications, with its compact size, low power consumption, and reliable data storage making it a preferred choice for designers and engineers.
[Word Count: 498]
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng AT25DN512C-SSHFGP-T sa mga teknikal na solusyon
What is the AT25DN512C-SSHFGP-T?
- The AT25DN512C-SSHFGP-T is a high-performance, low-power Serial NOR Flash memory device with 64Mb density.
What are the key features of the AT25DN512C-SSHFGP-T?
- It features a high-speed SPI interface, low power consumption, and a wide voltage range for compatibility with various systems.
How can the AT25DN512C-SSHFGP-T be used in technical solutions?
- It can be used for code storage, data storage, firmware updates, and booting in a wide range of applications such as IoT devices, industrial equipment, automotive systems, and consumer electronics.
What are the operating voltage and temperature range of the AT25DN512C-SSHFGP-T?
- It operates at voltages from 1.65V to 1.95V and temperatures ranging from -40°C to 85°C.
Does the AT25DN512C-SSHFGP-T support security features?
- Yes, it supports advanced security features such as hardware write protection and one-time programmable (OTP) area for secure data storage.
Can the AT25DN512C-SSHFGP-T be used for over-the-air (OTA) firmware updates?
- Yes, its fast read speed and low power consumption make it suitable for OTA firmware updates in IoT and embedded systems.
What tools or development kits are available for working with the AT25DN512C-SSHFGP-T?
- There are various development kits and evaluation boards available from the manufacturer to facilitate design and testing.
Is the AT25DN512C-SSHFGP-T compatible with standard SPI interfaces?
- Yes, it is fully compatible with standard SPI interfaces, making it easy to integrate into existing designs.
What are the typical power consumption characteristics of the AT25DN512C-SSHFGP-T?
- It has low active and standby power consumption, making it suitable for battery-powered and energy-efficient devices.
Are there any known limitations or considerations when using the AT25DN512C-SSHFGP-T in technical solutions?
- While the AT25DN512C-SSHFGP-T offers high performance and reliability, designers should carefully consider system-level requirements such as signal integrity, timing, and power supply stability for optimal operation.