Tingnan ang mga detalye para sa mga detalye ng produkto.
MF-RX160/72-0
Introduction
The MF-RX160/72-0 is a component belonging to the category of resettable fuses. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Resettable Fuse
- Use: Overcurrent protection
- Characteristics: Resettable, compact, reliable
- Package: SMD (Surface Mount Device)
- Essence: Provides overcurrent protection in electronic circuits
- Packaging/Quantity: Typically packaged in reels of 3000 units
Specifications
- Hold Current: 1.6A
- Trip Current: 3.2A
- Voltage Rating: 72V
- Operating Temperature Range: -40°C to 85°C
- Maximum Time-to-Trip: 60 seconds at 200% of rated current
Detailed Pin Configuration
The MF-RX160/72-0 has two terminals for surface mount installation. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Resettable: Automatically resets after the fault condition is removed
- Overcurrent Protection: Safeguards electronic circuits from excessive current
- Compact Design: Space-saving SMD package
- Reliable Operation: Ensures consistent performance over time
Advantages and Disadvantages
Advantages
- Resettable functionality increases product lifespan
- Compact size enables integration into densely populated PCBs
- Reliable overcurrent protection enhances system robustness
Disadvantages
- Limited maximum voltage rating compared to some non-resettable fuses
- Trip time may be longer than traditional fuses in certain applications
Working Principles
The MF-RX160/72-0 operates based on the principle of positive temperature coefficient (PTC) resistance. When subjected to an overcurrent condition, the device heats up, causing its resistance to increase dramatically, limiting the current flow and providing protection to the circuit. Once the fault is removed, the device cools down and returns to its low-resistance state.
Detailed Application Field Plans
The MF-RX160/72-0 is commonly used in various electronic devices and systems, including: - Consumer electronics - Automotive electronics - Industrial control systems - Telecommunications equipment - Power supplies
Detailed and Complete Alternative Models
Some alternative models to the MF-RX160/72-0 include: - MF-RX110/72-0 - MF-RX160/60-0 - MF-RX250/72-0 - MF-RX400/72-0
In summary, the MF-RX160/72-0 resettable fuse offers compact, reliable overcurrent protection suitable for a wide range of electronic applications.
Word Count: 398
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MF-RX160/72-0 sa mga teknikal na solusyon
What is the MF-RX160/72-0?
- The MF-RX160/72-0 is a resettable fuse designed to protect against overcurrent and overtemperature conditions in various electronic circuits.
What are the typical applications of MF-RX160/72-0?
- It is commonly used in battery packs, power supplies, and other electronic devices where overcurrent protection is required.
What is the maximum voltage and current rating for MF-RX160/72-0?
- The maximum voltage rating is 72V and the maximum current rating is 1.6A.
How does the MF-RX160/72-0 work?
- The MF-RX160/72-0 operates by using a polymer-based PTC (positive temperature coefficient) material that increases resistance when exposed to overcurrent or overtemperature conditions, effectively limiting the current flow.
Can the MF-RX160/72-0 be reset after tripping?
- Yes, the MF-RX160/72-0 is a resettable fuse, meaning it can return to its normal operating state once the fault condition is removed.
What are the temperature limits for the MF-RX160/72-0?
- The MF-RX160/72-0 has a maximum operating temperature of 85°C and a maximum trip temperature of 125°C.
Is the MF-RX160/72-0 suitable for automotive applications?
- Yes, the MF-RX160/72-0 is suitable for automotive applications where overcurrent protection is needed.
What are the advantages of using the MF-RX160/72-0 over traditional fuses?
- The MF-RX160/72-0 offers faster response times, resettable functionality, and better reliability compared to traditional fuses.
Can the MF-RX160/72-0 be used in high-power applications?
- While the MF-RX160/72-0 has a relatively low current rating, multiple units can be used in parallel to protect higher power circuits.
Are there any specific soldering or mounting requirements for the MF-RX160/72-0?
- The MF-RX160/72-0 can be soldered using standard reflow or wave soldering processes, and it is recommended to follow the manufacturer's guidelines for proper mounting and handling.