Bourns Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
TISP4290M3BJR-S
Tingnan ang Detalye DataSheets

TISP4290M3BJR-S

Introduction

The TISP4290M3BJR-S belongs to the category of transient voltage suppressor (TVS) diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the TISP4290M3BJR-S.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protecting sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
  • Characteristics: High surge capability, low clamping voltage, fast response time.
  • Package: M3BJ package type
  • Essence: Provides overvoltage protection for electronic circuits.
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier.

Specifications

  • Peak Pulse Current: 100A
  • Standoff Voltage: 58V
  • Clamping Voltage: 93.6V
  • Breakdown Voltage: 64.4V
  • Operating Temperature Range: -55°C to 150°C
  • Storage Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The TISP4290M3BJR-S has a standard 3-pin configuration with specific pin assignments for anode, cathode, and ground.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltages to safe levels.
  • Fast Response Time: Rapid reaction to voltage transients, minimizing potential damage to connected electronics.
  • High Surge Capability: Can withstand high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Clamping voltage may be relatively high for some applications
  • Sensitive to reverse polarity connection

Working Principles

The TISP4290M3BJR-S operates by diverting excess voltage away from sensitive components when a transient event occurs. It achieves this through a combination of avalanche breakdown and zener effect, effectively shunting the excess energy to protect downstream electronics.

Detailed Application Field Plans

The TISP4290M3BJR-S is commonly used in: - Telecommunication equipment - Industrial control systems - Power supplies - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • TISP4180M3BJR-S
  • TISP4240M3BJR-S
  • TISP4165M3BJR-S
  • TISP4200M3BJR-S

In summary, the TISP4290M3BJR-S is a TVS diode designed to protect sensitive electronics from voltage transients. With its high surge capability, fast response time, and effective transient voltage suppression, it finds applications in various industries and can be considered alongside alternative models for specific design requirements.

Word Count: 413

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TISP4290M3BJR-S sa mga teknikal na solusyon

  1. What is the TISP4290M3BJR-S?

    • The TISP4290M3BJR-S is a high-performance, bidirectional, solid-state silicon-avalanche technology surge protection device designed for use in a wide range of applications.

  2. What are the typical applications of TISP4290M3BJR-S?

    • The TISP4290M3BJR-S is commonly used in telecommunications equipment, Ethernet networks, industrial control systems, and power over Ethernet (PoE) applications.

  3. What is the maximum surge current capability of TISP4290M3BJR-S?

    • The TISP4290M3BJR-S has a maximum surge current capability of 100A (8/20 µs).

  4. What is the breakdown voltage of TISP4290M3BJR-S?

    • The breakdown voltage of TISP4290M3BJR-S is typically 90V.

  5. How does TISP4290M3BJR-S provide protection in telecommunications equipment?

    • TISP4290M3BJR-S provides overvoltage protection for sensitive electronics in telecommunications equipment by diverting surge currents away from the protected equipment.

  6. Can TISP4290M3BJR-S be used in outdoor applications?

    • Yes, TISP4290M3BJR-S is suitable for outdoor applications due to its robust construction and environmental resilience.

  7. What is the response time of TISP4290M3BJR-S?

    • The response time of TISP4290M3BJR-S is very fast, typically responding within nanoseconds to divert surge currents.

  8. Is TISP4290M3BJR-S RoHS compliant?

    • Yes, TISP4290M3BJR-S is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  9. Can TISP4290M3BJR-S be used in PoE applications?

    • Yes, TISP4290M3BJR-S is suitable for Power over Ethernet (PoE) applications to protect network equipment from transient voltage events.

  10. What are the mounting options for TISP4290M3BJR-S?

    • TISP4290M3BJR-S can be mounted on printed circuit boards (PCBs) using surface mount technology (SMT) or through-hole technology (THT) for easy integration into various technical solutions.