Tingnan ang mga detalye para sa mga detalye ng produkto.
TISP4P015L1NR-S
Product Overview
The TISP4P015L1NR-S belongs to the category of surge protection devices and is commonly used to protect sensitive electronic equipment from voltage transients. Its characteristics include high surge current capability, low capacitance, and fast response time. The package consists of a small outline integrated circuit (SOIC) and it is available in quantities of 2500 per reel.
Specifications
- Maximum Working Voltage: 15 V
- Holding Current: 150 mA
- Breakdown Voltage: 20 V
- Capacitance: 3 pF
- Response Time: < 1 ns
Detailed Pin Configuration
The TISP4P015L1NR-S has a total of 6 pins, with pin 1 being the cathode, pin 2 the anode, pin 3 the cathode, pin 4 the anode, pin 5 the cathode, and pin 6 the anode.
Functional Features
- High surge current capability
- Low capacitance for minimal signal distortion
- Fast response time for effective protection
Advantages and Disadvantages
Advantages: - Effective protection against voltage transients - Fast response time - Low capacitance
Disadvantages: - Limited to lower voltage applications - May require additional components for comprehensive surge protection
Working Principles
The TISP4P015L1NR-S operates based on the principle of diverting excessive transient currents away from sensitive electronic circuits. When a voltage transient occurs, the device rapidly switches into a low impedance state, shunting the excess current to ground and protecting the connected equipment.
Detailed Application Field Plans
The TISP4P015L1NR-S is widely used in telecommunications equipment, data lines, and other sensitive electronic systems where protection against voltage transients is critical. It is particularly suitable for use in Ethernet ports, telecommunication interfaces, and industrial control lines.
Detailed and Complete Alternative Models
TISP4011L1BJR-S
- Maximum Working Voltage: 11 V
- Holding Current: 100 mA
- Breakdown Voltage: 14 V
- Capacitance: 2 pF
- Response Time: < 0.5 ns
TISP4070H3BJR-S
- Maximum Working Voltage: 70 V
- Holding Current: 500 mA
- Breakdown Voltage: 90 V
- Capacitance: 5 pF
- Response Time: < 2 ns
TISP4165M3BJR-S
- Maximum Working Voltage: 165 V
- Holding Current: 1 A
- Breakdown Voltage: 200 V
- Capacitance: 8 pF
- Response Time: < 3 ns
In conclusion, the TISP4P015L1NR-S is a surge protection device designed to safeguard sensitive electronic equipment from voltage transients. With its fast response time, low capacitance, and high surge current capability, it offers effective protection in various applications, particularly in telecommunications and data line systems.
Word count: 443
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TISP4P015L1NR-S sa mga teknikal na solusyon
What is TISP4P015L1NR-S?
- TISP4P015L1NR-S is a silicon-based voltage suppressor component used for overvoltage protection in electronic circuits.
What are the key features of TISP4P015L1NR-S?
- The key features include low capacitance, high surge current capability, and fast response time.
How is TISP4P015L1NR-S typically used in technical solutions?
- It is commonly used to protect sensitive electronic components from transient overvoltage events, such as lightning strikes or power surges.
What are the typical applications for TISP4P015L1NR-S?
- Typical applications include telecommunications equipment, data lines, industrial control systems, and consumer electronics.
What is the maximum voltage rating of TISP4P015L1NR-S?
- The maximum voltage rating is typically around 15V.
How does TISP4P015L1NR-S provide overvoltage protection?
- It shunts excess voltage to ground, diverting it away from sensitive components and preventing damage.
What are the environmental considerations for using TISP4P015L1NR-S?
- TISP4P015L1NR-S is designed to meet industry standards for environmental compliance, including RoHS and REACH requirements.
Are there any special handling or installation requirements for TISP4P015L1NR-S?
- It should be handled with ESD precautions and installed according to manufacturer's guidelines to ensure proper performance.
Can TISP4P015L1NR-S be used in outdoor applications?
- Yes, it can be used in outdoor applications, but proper encapsulation and protection from moisture may be necessary.
Where can I find detailed technical specifications and application notes for TISP4P015L1NR-S?
- Detailed technical specifications and application notes can be found on the manufacturer's website or in the product datasheet.