Bourns Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
TISP5070H3BJR-S
Tingnan ang Detalye DataSheets

TISP5070H3BJR-S

Introduction

The TISP5070H3BJR-S is a specialized component designed for surge protection in electronic circuits. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Surge Protection Device
  • Use: Protecting electronic circuits from voltage surges and transients
  • Characteristics: High surge current capability, low capacitance, compact design
  • Package: Surface Mount
  • Essence: Ensuring the safety and reliability of electronic equipment
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Maximum Working Voltage: 5V
  • Breakdown Voltage: 6.8V
  • Clamping Voltage: 9.2V
  • Peak Pulse Current: 100A
  • Capacitance: 1pF (Typical)

Detailed Pin Configuration

The TISP5070H3BJR-S has a surface mount package with a specific pin configuration as follows: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Not Connected

Functional Features

  • Surge Protection: Provides robust protection against voltage surges and transients.
  • Low Capacitance: Minimizes signal distortion and ensures high-speed data transmission.
  • Compact Design: Space-saving surface mount package for easy integration into circuit designs.

Advantages and Disadvantages

Advantages

  • High surge current capability
  • Low capacitance for minimal signal distortion
  • Compact and space-saving design

Disadvantages

  • Limited to low voltage applications
  • May require additional components for comprehensive surge protection in complex systems

Working Principles

The TISP5070H3BJR-S operates based on the principles of avalanche breakdown and transient voltage suppression. When a surge occurs, the device rapidly clamps the voltage to a safe level, protecting downstream electronics.

Detailed Application Field Plans

The TISP5070H3BJR-S is suitable for various applications, including: - Telecommunication equipment - Data lines - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • TISP61089BDR-S: Offers similar surge protection with higher voltage ratings
  • TPD4E001: Provides ESD protection along with surge suppression capabilities
  • PGB1010603MR: Suitable for high-power surge protection applications

In conclusion, the TISP5070H3BJR-S is a reliable surge protection device with specific characteristics and applications. Its compact design and high surge current capability make it a valuable component in safeguarding electronic circuits from voltage disturbances.

[Word Count: 410]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TISP5070H3BJR-S sa mga teknikal na solusyon

  1. What is the TISP5070H3BJR-S?

    • The TISP5070H3BJR-S is a high-performance, bidirectional, solid-state silicon-avalanche technology surge protection device designed for use in a wide range of applications.

  2. What are the typical applications of TISP5070H3BJR-S?

    • The TISP5070H3BJR-S is commonly used in telecommunications equipment, network interface devices, industrial control systems, and power over Ethernet (PoE) applications.

  3. What is the maximum surge current capability of TISP5070H3BJR-S?

    • The TISP5070H3BJR-S has a maximum surge current capability of 100A (8/20 µs).

  4. What is the breakdown voltage of TISP5070H3BJR-S?

    • The breakdown voltage of TISP5070H3BJR-S is typically 70V.

  5. Is TISP5070H3BJR-S suitable for outdoor applications?

    • Yes, TISP5070H3BJR-S is suitable for outdoor applications as it is designed to withstand harsh environmental conditions.

  6. What is the response time of TISP5070H3BJR-S?

    • The response time of TISP5070H3BJR-S is very fast, typically less than 5 nanoseconds.

  7. Can TISP5070H3BJR-S be used for protecting Ethernet ports?

    • Yes, TISP5070H3BJR-S is commonly used for protecting Ethernet ports in networking equipment.

  8. Does TISP5070H3BJR-S require external components for operation?

    • No, TISP5070H3BJR-S does not require any external components for its operation.

  9. What is the operating temperature range of TISP5070H3BJR-S?

    • The operating temperature range of TISP5070H3BJR-S is typically -40°C to 125°C.

  10. Is TISP5070H3BJR-S compliant with industry standards?

    • Yes, TISP5070H3BJR-S is compliant with industry standards such as IEC 61000-4-5 and Telcordia GR-1089-CORE.