Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
1N965B TR

1N965B TR

Product Overview

Category:

The 1N965B TR belongs to the category of semiconductor diodes.

Use:

It is commonly used in electronic circuits for rectification and signal demodulation.

Characteristics:

  • Forward voltage drop: 0.7V
  • Reverse current: 5µA
  • Maximum repetitive peak reverse voltage: 50V
  • Maximum average forward rectified current: 200mA

Package:

The 1N965B TR is typically available in a DO-35 package.

Essence:

This diode is essential for converting alternating current (AC) to direct current (DC) in electronic circuits.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Forward Voltage Drop: 0.7V
  • Reverse Current: 5µA
  • Maximum Repetitive Peak Reverse Voltage: 50V
  • Maximum Average Forward Rectified Current: 200mA

Detailed Pin Configuration

The 1N965B TR has two pins, anode and cathode, which are identified by a band on the cathode side.

Functional Features

The 1N965B TR diode provides reliable rectification and demodulation of signals in electronic circuits. It offers low forward voltage drop and minimal reverse current, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • Low forward voltage drop
  • Minimal reverse current
  • Compact size

Disadvantages

  • Limited maximum average forward rectified current
  • Lower maximum repetitive peak reverse voltage compared to some alternatives

Working Principles

When a positive voltage is applied to the anode and a negative voltage to the cathode, the diode conducts current in the forward direction, allowing only one-way flow of current. In the reverse bias, the diode blocks the current flow.

Detailed Application Field Plans

The 1N965B TR is widely used in: - Power supply units - Signal demodulation circuits - Voltage regulation circuits - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the 1N965B TR include: - 1N914 - 1N4148 - 1N4001

In conclusion, the 1N965B TR diode is a crucial component in electronic circuits, providing efficient rectification and signal demodulation. Its compact size and low forward voltage drop make it suitable for various applications, although its limitations in maximum average forward rectified current and maximum repetitive peak reverse voltage should be considered when selecting alternatives.

[Word Count: 386]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 1N965B TR sa mga teknikal na solusyon

  1. What is the 1N965B TR diode used for?

    • The 1N965B TR diode is commonly used for general-purpose rectification and switching applications.
  2. What are the key specifications of the 1N965B TR diode?

    • The 1N965B TR diode typically has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward current of 1 ampere, and a forward voltage drop of around 1 volt at 1 ampere.
  3. Can the 1N965B TR diode be used in high-frequency applications?

    • While the 1N965B TR diode can function at moderate frequencies, it may not be suitable for very high-frequency applications due to its inherent capacitance and recovery time.
  4. Is the 1N965B TR diode suitable for use in power supply circuits?

    • Yes, the 1N965B TR diode can be used in power supply circuits for rectification and voltage regulation purposes.
  5. What are the typical operating temperature ranges for the 1N965B TR diode?

    • The 1N965B TR diode is designed to operate within a temperature range of -65°C to +175°C.
  6. Does the 1N965B TR diode require a heat sink for certain applications?

    • Depending on the specific application and power dissipation, a heat sink may be necessary to ensure the 1N965B TR diode operates within its temperature limits.
  7. Can the 1N965B TR diode handle surge currents?

    • The 1N965B TR diode has limited surge current capabilities, and external protection may be required in high-surge environments.
  8. Are there any notable failure modes associated with the 1N965B TR diode?

    • Common failure modes include thermal runaway under high current conditions and potential damage from excessive reverse voltage.
  9. What are some typical circuit configurations where the 1N965B TR diode is used?

    • The 1N965B TR diode is often employed in half-wave and full-wave rectifier circuits, as well as in freewheeling and flyback diode applications.
  10. Are there any recommended alternatives to the 1N965B TR diode for specific applications?

    • Depending on the exact requirements of the application, alternative diodes such as the 1N400x series or 1N540x series may be suitable replacements for the 1N965B TR diode.