Comchip Technology
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
KBU3504-G
Tingnan ang Detalye DataSheets

KBU3504-G

Introduction

The KBU3504-G is a bridge rectifier diode that belongs to the category of electronic components used in power supply circuits. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the KBU3504-G.

Basic Information Overview

  • Category: Electronic Components
  • Use: Power supply circuits
  • Characteristics: Bridge rectifier diode
  • Package: KBU package
  • Essence: Converts alternating current (AC) to direct current (DC)
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Maximum Average Rectified Output Current: 35A
  • Maximum Repetitive Peak Reverse Voltage: 400V
  • Maximum DC Blocking Voltage: 400V
  • Operating Temperature Range: -55°C to +150°C
  • Storage Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The KBU3504-G bridge rectifier diode has four pins arranged in a specific configuration: 1. Pin 1: AC input terminal 1 2. Pin 2: AC input terminal 2 3. Pin 3: DC output terminal (+) 4. Pin 4: DC output terminal (-)

Functional Features

  • Converts AC input to DC output
  • Provides full-wave rectification
  • High current-carrying capability
  • Low forward voltage drop

Advantages and Disadvantages

Advantages

  • High current rating
  • Compact size
  • Suitable for high-power applications
  • Reliable performance

Disadvantages

  • Higher cost compared to lower-rated diodes
  • Requires heat sinking in high-power applications

Working Principles

The KBU3504-G operates on the principle of full-wave rectification, where it converts the entire cycle of the input AC signal into a pulsating DC signal. When the input AC voltage is positive, current flows through one pair of diodes, and when the input AC voltage is negative, current flows through the other pair of diodes, resulting in a continuous DC output.

Detailed Application Field Plans

The KBU3504-G is commonly used in the following applications: - Power supplies for industrial equipment - Battery chargers - Welding equipment - Motor drives - Uninterruptible power supplies (UPS)

Detailed and Complete Alternative Models

Some alternative models to the KBU3504-G include: - KBU3506-G: Higher maximum repetitive peak reverse voltage (600V) - KBU3510-G: Higher maximum average rectified output current (50A) - KBU3512-G: Higher maximum average rectified output current (70A)

In summary, the KBU3504-G bridge rectifier diode is a reliable component with high current-carrying capability, suitable for various power supply applications.

[Word Count: 411]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng KBU3504-G sa mga teknikal na solusyon

Sure, here are 10 common questions and answers related to the application of KBU3504-G in technical solutions:

  1. Q: What is the maximum repetitive peak reverse voltage of KBU3504-G?
    A: The maximum repetitive peak reverse voltage of KBU3504-G is 400V.

  2. Q: What is the average rectified output current of KBU3504-G at a certain temperature?
    A: The average rectified output current of KBU3504-G varies with temperature, but it is typically around 35A at 55°C.

  3. Q: Can KBU3504-G be used in bridge rectifier applications?
    A: Yes, KBU3504-G is suitable for use in bridge rectifier configurations.

  4. Q: What is the forward voltage drop of KBU3504-G at a specific current?
    A: The forward voltage drop of KBU3504-G is approximately 1.1V at 17.5A.

  5. Q: Is KBU3504-G suitable for use in power supplies?
    A: Yes, KBU3504-G is commonly used in power supply applications.

  6. Q: What is the maximum junction temperature of KBU3504-G?
    A: The maximum junction temperature of KBU3504-G is 150°C.

  7. Q: Can KBU3504-G be used in high-frequency rectification circuits?
    A: KBU3504-G is not recommended for high-frequency applications due to its inherent limitations.

  8. Q: Does KBU3504-G require a heatsink for certain applications?
    A: Yes, a heatsink may be necessary for high-power or high-temperature applications to ensure proper thermal management.

  9. Q: What is the typical reverse recovery time of KBU3504-G?
    A: The typical reverse recovery time of KBU3504-G is around 500ns.

  10. Q: Are there any specific precautions to consider when using KBU3504-G in automotive applications?
    A: When used in automotive applications, attention should be given to temperature variations and electrical stress to ensure reliable performance.