Tingnan ang mga detalye para sa mga detalye ng produkto.
CP8139ATT
Product Overview
- Category: Integrated Circuit
- Use: Communication and Networking
- Characteristics: High-speed Ethernet Controller
- Package: QFP (Quad Flat Package)
- Essence: Provides high-performance networking capabilities
- Packaging/Quantity: Individually packaged, quantity varies based on order
Specifications
- Manufacturer: CP Technologies
- Model Number: CP8139ATT
- Interface: PCI Express
- Data Transfer Rate: 10/100/1000 Mbps
- Supported Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Operating Voltage: 3.3V
- Power Consumption: <1W
- Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The CP8139ATT has the following pin configuration:
- VCC
- TX+
- TX-
- GND
- RX+
- RX-
- GND
- REFCLK+
- REFCLK-
- GND
- WOL
- RST#
- CLKREQ#
- PME#
- GND
- INTA#
- GNT#
- REQ#
- GND
- AD[31:0]
(Note: The pin configuration may vary depending on the package type.)
Functional Features
- High-speed data transfer up to 1 Gbps
- Supports full-duplex and half-duplex communication modes
- Auto-negotiation for optimal speed and duplex settings
- Advanced power management features for energy efficiency
- Wake-on-LAN (WOL) support for remote wake-up functionality
- Built-in hardware acceleration for improved performance
- Jumbo frame support for efficient data transmission
Advantages and Disadvantages
Advantages: - High-speed data transfer for fast network connectivity - Energy-efficient design for reduced power consumption - Wake-on-LAN support enables remote wake-up functionality - Advanced features enhance overall performance
Disadvantages: - Limited compatibility with older network protocols - Requires a PCI Express interface for connection - May require additional drivers for proper installation
Working Principles
The CP8139ATT is an Ethernet controller that operates based on the principles of data packet transmission and reception. It utilizes the PCI Express interface to connect with the host system and communicates with other devices on the network using the supported protocols. The controller manages the flow of data, performs error checking, and ensures reliable communication between the host system and the network.
Detailed Application Field Plans
The CP8139ATT is commonly used in various applications, including:
- Desktop Computers: Provides high-speed Ethernet connectivity for desktop computers, enabling fast data transfer and network access.
- Servers: Used in server systems to handle high network traffic and ensure efficient data processing.
- Network Switches: Integrated into network switches to facilitate data transmission between multiple devices within a network.
- Industrial Automation: Enables networking capabilities in industrial automation systems, allowing for efficient control and monitoring.
Detailed and Complete Alternative Models
- CP8139BTT: Similar to CP8139ATT but with additional features for enhanced performance.
- CP8139CTT: A compact version of CP8139ATT designed for space-constrained applications.
- CP8139DTT: Offers extended temperature range for operation in harsh environments.
- CP8139ETT: Supports advanced security features for secure network communication.
(Note: The alternative models listed above are examples and may not represent an exhaustive list.)
This entry provides an overview of the CP8139ATT Ethernet controller, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The CP8139ATT offers high-speed networking capabilities and is widely used in various communication and networking applications.
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng CP8139ATT sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of CP8139ATT in technical solutions:
Q: What is CP8139ATT? A: CP8139ATT is a technical solution developed by our company for optimizing network performance and improving data transmission efficiency.
Q: How does CP8139ATT work? A: CP8139ATT utilizes advanced algorithms and protocols to analyze network traffic, identify bottlenecks, and optimize data transmission paths for improved performance.
Q: What are the key benefits of using CP8139ATT? A: The key benefits of CP8139ATT include enhanced network performance, reduced latency, improved bandwidth utilization, and increased data throughput.
Q: Can CP8139ATT be integrated into existing network infrastructure? A: Yes, CP8139ATT is designed to seamlessly integrate with existing network infrastructure, making it easy to deploy and manage.
Q: Is CP8139ATT compatible with different types of networks? A: Yes, CP8139ATT is compatible with various types of networks, including wired, wireless, and hybrid networks.
Q: Does CP8139ATT require any specialized hardware or software? A: No, CP8139ATT can be implemented using standard networking equipment and does not require any specialized hardware or software.
Q: Can CP8139ATT improve network security? A: While CP8139ATT primarily focuses on optimizing network performance, it can indirectly enhance network security by reducing latency and improving response times.
Q: How long does it take to implement CP8139ATT in a network? A: The implementation time for CP8139ATT depends on the size and complexity of the network. It typically ranges from a few days to a few weeks.
Q: Does CP8139ATT require ongoing maintenance and updates? A: Yes, like any other technical solution, CP8139ATT requires regular maintenance and updates to ensure optimal performance and compatibility with evolving network technologies.
Q: Can CP8139ATT be customized to meet specific network requirements? A: Yes, CP8139ATT can be customized to align with specific network requirements, allowing organizations to tailor the solution according to their unique needs.
Please note that these questions and answers are generic and may vary depending on the specific implementation and context of CP8139ATT in different technical solutions.