Exar Corporation
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XR16V794IV-F
Tingnan ang Detalye DataSheets

XR16V794IV-F

Product Overview

Category

The XR16V794IV-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for data communication and control purposes.

Characteristics

  • High-speed data transmission capabilities
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The XR16V794IV-F is available in a small form factor package, typically a 48-pin quad flat package (QFP).

Essence

The essence of the XR16V794IV-F lies in its ability to facilitate efficient and reliable data communication within electronic systems.

Packaging/Quantity

The XR16V794IV-F is usually packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Data transfer rate: Up to 3 Mbps
  • Operating voltage: 3.3V
  • Number of channels: 4
  • Interface: UART (Universal Asynchronous Receiver Transmitter)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The XR16V794IV-F has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC
  2. GND
  3. TXD1
  4. RXD1
  5. CTS1
  6. RTS1
  7. DTR1
  8. DSR1
  9. RI1
  10. CD1
  11. TXD2
  12. RXD2
  13. CTS2
  14. RTS2
  15. DTR2
  16. DSR2
  17. RI2
  18. CD2
  19. TXD3
  20. RXD3
  21. CTS3
  22. RTS3
  23. DTR3
  24. DSR3
  25. RI3
  26. CD3
  27. TXD4
  28. RXD4
  29. CTS4
  30. RTS4
  31. DTR4
  32. DSR4
  33. RI4
  34. CD4 35-48. NC (No Connection)

Functional Features

The XR16V794IV-F offers the following functional features:

  1. UART Interface: Enables asynchronous serial communication between devices.
  2. Multi-channel Support: Provides four independent channels for simultaneous data transmission.
  3. Flow Control: Supports hardware flow control using CTS (Clear To Send) and RTS (Request To Send) signals.
  4. Data Rate Flexibility: Allows adjustable data transfer rates up to 3 Mbps.
  5. Error Detection: Implements various error detection mechanisms to ensure reliable data transmission.

Advantages and Disadvantages

Advantages

  • High-speed data transfer capabilities enhance overall system performance.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size enables integration into space-constrained designs.
  • Reliable performance ensures stable data communication.

Disadvantages

  • Limited number of channels may not suffice for applications requiring more simultaneous connections.
  • Higher cost compared to simpler UART ICs with fewer features.

Working Principles

The XR16V794IV-F operates based on the principles of UART communication. It receives and transmits data in a serial format, converting parallel data from the device into a serial stream for transmission and vice versa. The UART interface handles the synchronization and framing of data packets, ensuring accurate and reliable communication between devices.

Detailed Application Field Plans

The XR16V794IV-F finds application in various fields, including but not limited to:

  1. Industrial Automation: Used in PLCs (Programmable Logic Controllers) for data communication between sensors, actuators, and control systems.
  2. Telecommunications: Employed in networking equipment for serial data transmission between routers, switches, and other network devices.
  3. Automotive Electronics: Integrated into automotive systems for communication between different modules, such as the engine control unit and dashboard display.
  4. Consumer Electronics: Utilized in devices like set-top boxes, gaming consoles, and home automation systems to enable data exchange between components.

Detailed and Complete Alternative Models

  1. XR16V798IV-F: Similar to the XR16V794IV-F, but with additional channels for increased connectivity options.
  2. XR16V792IV-F: A lower-cost alternative with two channels, suitable for applications requiring fewer simultaneous connections.
  3. XR16V791IV-F: A compact version with a single channel, ideal for space-constrained designs or applications with minimal data transfer requirements.

(Note: The above alternative models are provided for reference and may vary based on availability and specific application requirements.)

Word count: 1100 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XR16V794IV-F sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XR16V794IV-F in technical solutions:

  1. Q: What is XR16V794IV-F? A: XR16V794IV-F is a specific model of integrated circuit (IC) or microcontroller designed for use in technical solutions.

  2. Q: What are the key features of XR16V794IV-F? A: Some key features of XR16V794IV-F include multiple UART channels, high-speed data transfer capabilities, low power consumption, and support for various communication protocols.

  3. Q: What are the typical applications of XR16V794IV-F? A: XR16V794IV-F is commonly used in applications such as industrial automation, embedded systems, robotics, IoT devices, and communication equipment.

  4. Q: How many UART channels does XR16V794IV-F support? A: XR16V794IV-F supports up to four UART channels, allowing simultaneous communication with multiple devices.

  5. Q: Can XR16V794IV-F be used with different communication protocols? A: Yes, XR16V794IV-F supports various communication protocols such as RS-232, RS-485, and SPI, making it versatile for different applications.

  6. Q: What is the power consumption of XR16V794IV-F? A: XR16V794IV-F is designed to have low power consumption, typically operating at a few milliwatts, making it suitable for battery-powered devices.

  7. Q: Does XR16V794IV-F have any built-in security features? A: XR16V794IV-F does not have specific built-in security features. However, it can be used in conjunction with other security measures implemented in the overall system design.

  8. Q: Can XR16V794IV-F be programmed or configured? A: Yes, XR16V794IV-F can be programmed and configured using specific software tools provided by the manufacturer.

  9. Q: What is the operating voltage range of XR16V794IV-F? A: XR16V794IV-F typically operates within a voltage range of 2.7V to 5.5V, allowing compatibility with various power supply sources.

  10. Q: Is XR16V794IV-F a commonly available IC? A: Yes, XR16V794IV-F is a commonly available IC and can be purchased from authorized distributors or manufacturers.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation for XR16V794IV-F.