Global Power Technologies Group
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
GP2D005A120C
Tingnan ang Detalye DataSheets

GP2D005A120C

Introduction

The GP2D005A120C is a sensor belonging to the category of distance measuring sensors. This sensor is commonly used in robotics, automation, and consumer electronics for its ability to accurately measure distances within a specific range. Its characteristics, package, essence, packaging/quantity, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models are detailed below.

Basic Information Overview

  • Category: Distance Measuring Sensor
  • Use: Measure distances within a specific range
  • Characteristics: Accurate distance measurement, compact size, low power consumption
  • Package: Compact module with integrated components
  • Essence: Utilizes infrared light to measure distance
  • Packaging/Quantity: Typically sold as individual units

Specifications

  • Range: 4cm to 30cm
  • Supply Voltage: 4.5V to 5.5V
  • Average Current Consumption: 33mA
  • Output Type: Analog voltage proportional to distance
  • Operating Temperature: -10°C to 60°C
  • Dimensions: Compact form factor

Detailed Pin Configuration

  1. Vcc (Power Supply)
  2. GND (Ground)
  3. Vo (Analog Output)

Functional Features

  • Utilizes infrared light to measure distance
  • Provides accurate distance measurements within the specified range
  • Compact size allows for easy integration into various electronic devices
  • Low power consumption makes it suitable for battery-powered applications

Advantages

  • Accurate distance measurement
  • Compact size
  • Low power consumption
  • Easy integration into electronic devices

Disadvantages

  • Limited range compared to some other distance sensors
  • Susceptible to interference from ambient infrared light sources

Working Principles

The GP2D005A120C operates based on the principle of infrared triangulation. It emits a modulated infrared beam towards the target object and measures the time it takes for the beam to be reflected back to the sensor. By analyzing the reflected beam, the sensor can accurately determine the distance to the target object.

Detailed Application Field Plans

  • Robotics: Used for obstacle detection and navigation
  • Automation: Integrated into machinery for proximity sensing
  • Consumer Electronics: Implemented in devices for touchless control and gesture recognition

Detailed and Complete Alternative Models

  • Sharp GP2Y0A21YK0F: Offers longer range and higher accuracy
  • Pololu 1134: Provides similar functionality with different form factor
  • Adafruit VL53L0X: Utilizes time-of-flight technology for precise distance measurement

In conclusion, the GP2D005A120C distance measuring sensor offers accurate distance measurement within a specific range, making it suitable for various applications in robotics, automation, and consumer electronics.

[Word Count: 420]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng GP2D005A120C sa mga teknikal na solusyon

  1. What is the GP2D005A120C sensor used for?

    • The GP2D005A120C sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2D005A120C sensor?

    • The operating voltage of the GP2D005A120C sensor is typically around 5V.

  3. How does the GP2D005A120C sensor measure distance?

    • The GP2D005A120C sensor measures distance using infrared light and triangulation principles.

  4. What is the range of the GP2D005A120C sensor?

    • The GP2D005A120C sensor has a typical range of 4cm to 30cm.

  5. What are some common applications of the GP2D005A120C sensor?

    • Common applications of the GP2D005A120C sensor include robotics, automation, and proximity sensing.

  6. Does the GP2D005A120C sensor require calibration?

    • Yes, the GP2D005A120C sensor may require calibration to ensure accurate distance measurements.

  7. Can the GP2D005A120C sensor be used outdoors?

    • It is not recommended to use the GP2D005A120C sensor outdoors as it may be affected by ambient light and environmental conditions.

  8. What is the output of the GP2D005A120C sensor?

    • The GP2D005A120C sensor typically provides an analog output proportional to the measured distance.

  9. Is the GP2D005A120C sensor sensitive to object color or material?

    • The GP2D005A120C sensor may be sensitive to object color and material, so it's important to consider this when designing a solution.

  10. Are there any limitations to using the GP2D005A120C sensor?

    • Some limitations of the GP2D005A120C sensor include its limited range and susceptibility to ambient light interference.