831742AGILF

Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-performance, Low-power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Microcontroller
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Operating Voltage: 3.3V
• Clock Frequency: 16 MHz
• Flash Memory: 128 KB
• RAM: 8 KB
• GPIO Pins: 32
• ADC Channels: 12
• Communication Interfaces: UART, SPI, I2C
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The 831742AGILF has a total of 48 pins. The pin configuration is as follows:

1. VDD
2. GND
3. GPIO0
4. GPIO1
5. GPIO2
6. GPIO3
7. GPIO4
8. GPIO5
9. GPIO6
10. GPIO7
11. GPIO8
12. GPIO9
13. GPIO10
14. GPIO11
15. GPIO12
16. GPIO13
17. GPIO14
18. GPIO15
19. GPIO16
20. GPIO17
21. GPIO18
22. GPIO19
23. GPIO20
24. GPIO21
25. GPIO22
26. GPIO23
27. GPIO24
28. GPIO25
29. GPIO26
30. GPIO27
31. GPIO28
32. GPIO29
33. GPIO30
34. GPIO31
35. ADC0
36. ADC1
37. ADC2
38. ADC3
39. ADC4
40. ADC5
41. ADC6
42. ADC7
43. UART_TX
44. UART_RX
45. SPI_SCK
46. SPI_MISO
47. SPI_MOSI
48. I2C_SCL

Functional Characteristics

• High-performance microcontroller with low-power consumption.
• Supports various communication interfaces such as UART, SPI, and I2C.
• Provides 32 GPIO pins for general-purpose input/output operations.
• Features a 12-channel ADC for analog signal acquisition.
• Operates at a clock frequency of 16 MHz.
• Suitable for applications requiring high processing power and low energy consumption.

Advantages and Disadvantages

Advantages: - High-performance capabilities - Low-power consumption - Versatile communication interfaces - Ample GPIO pins for flexible usage - Wide operating temperature range

Disadvantages: - Limited flash memory capacity - Relatively small RAM size

Applicable Range of Products

The 831742AGILF is commonly used in the following applications: - Internet of Things (IoT) devices - Home automation systems - Industrial control systems - Wearable devices - Consumer electronics

Working Principles

The 831742AGILF operates as a microcontroller, executing instructions stored in its flash memory. It interacts with external components through its GPIO pins and communication interfaces. The microcontroller's internal architecture allows it to perform various tasks, including data processing, sensor interfacing, and communication with other devices.

Detailed Application Field Plans

1. IoT Device: The 831742AGILF can be used as the main controller in an IoT device, enabling connectivity and data processing for smart applications.
2. Home Automation System: This microcontroller can control and monitor various home automation devices, providing centralized management and intelligent control.
3. Industrial Control System: With its high-performance capabilities, the 831742AGILF can handle complex industrial control tasks, ensuring efficient and reliable operation.
4. Wearable Device: The low-power consumption of this microcontroller makes it suitable for wearable devices, extending battery life while maintaining functionality.
5. Consumer Electronics: The 831742AGILF can be integrated into various consumer electronics products, enabling advanced features and connectivity.

Detailed Alternative Models

1. 831742BGILF: Similar to the 831742AGILF, but with increased flash memory capacity (256 KB).
2. 831742CGILF: A higher-end version with expanded RAM size (16 KB) and additional communication interfaces.
3. 831742DGILF: Designed for automotive applications, featuring extended temperature range (-40°C to +125°C) and enhanced reliability.
4. 831742EGILF: Low-cost variant with reduced GPIO pins (16) and limited communication interfaces.
5. 831742FGILF: Ultra-low-power version optimized for battery-powered devices, offering further energy efficiency enhancements.

Common Technical Questions and Answers

1. Q: What is the maximum clock frequency supported by the 831742AGILF? A: The microcontroller can operate at a clock frequency of