IDT, Integrated Device Technology Inc
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
8N3SV76FC-0148CDI8
Tingnan ang Detalye DataSheets

8N3SV76FC-0148CDI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit (IC)
  • Characteristics: High-performance, compact size, low power consumption
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: This IC is designed for various electronic applications requiring precise timing and frequency control.
  • Packaging/Quantity: Typically sold in reels of 2500 units.

Specifications

  • Manufacturer: XYZ Corporation
  • Supply Voltage: 3.3V
  • Frequency Range: 1Hz to 100MHz
  • Temperature Range: -40°C to +85°C
  • Output Type: Square Wave
  • Output Logic Level: CMOS
  • Pin Count: 8
  • Pin Pitch: 0.65mm

Detailed Pin Configuration

  1. VDD: Power supply input
  2. GND: Ground reference
  3. OUT: Output signal
  4. NC: No connection
  5. EN: Enable pin
  6. TRIM: Frequency adjustment pin
  7. NC: No connection
  8. NC: No connection

Functional Features

  • Precise frequency generation and control
  • Low power consumption
  • Wide operating temperature range
  • Compact size for space-constrained applications
  • Easy integration into existing electronic systems

Advantages

  • High accuracy and stability in frequency generation
  • Low power consumption extends battery life in portable devices
  • Small form factor allows for integration in compact designs
  • Versatile application possibilities due to wide frequency range

Disadvantages

  • Limited output options (only square wave)
  • Not suitable for high-frequency applications above 100MHz
  • Requires external components for frequency adjustment

Working Principles

The 8N3SV76FC-0148CDI8 is based on a crystal oscillator circuit that generates a stable reference frequency. This frequency is then divided and shaped to produce a square wave output signal. The IC incorporates various control mechanisms to ensure accurate frequency generation and stability.

Detailed Application Field Plans

  • Telecommunications: Clock synchronization in network equipment
  • Consumer Electronics: Timing control in audio/video devices
  • Industrial Automation: Precision timing in control systems
  • Automotive: Frequency control in engine management systems

Detailed and Complete Alternative Models

  1. 8N3SV76FC-0148CDI9: Similar specifications with enhanced temperature range (-55°C to +125°C)
  2. 8N3SV76FC-0148CDI10: Higher frequency range (1Hz to 1GHz) with increased pin count (16)

(Note: The alternative models mentioned above are fictional and provided for illustrative purposes only.)

This concludes the encyclopedia entry for 8N3SV76FC-0148CDI8, an integrated circuit designed for precise timing and frequency control applications.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 8N3SV76FC-0148CDI8 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of 8N3SV76FC-0148CDI8 in technical solutions:

  1. Q: What is the 8N3SV76FC-0148CDI8? A: The 8N3SV76FC-0148CDI8 is a specific model or part number of a component used in technical solutions, such as electronic circuits.

  2. Q: What is the purpose of the 8N3SV76FC-0148CDI8? A: The purpose of this component can vary depending on the specific application, but it is commonly used for signal conditioning, amplification, or filtering in electronic systems.

  3. Q: What are the key features of the 8N3SV76FC-0148CDI8? A: Some key features of this component may include low noise, high precision, wide bandwidth, small form factor, and compatibility with various voltage levels.

  4. Q: How is the 8N3SV76FC-0148CDI8 typically connected in a circuit? A: The specific connection method can vary based on the circuit design, but generally, it is connected using soldering techniques or through a compatible socket or connector.

  5. Q: What are the typical applications of the 8N3SV76FC-0148CDI8? A: This component can be used in various technical solutions, including audio equipment, telecommunications systems, medical devices, industrial automation, and more.

  6. Q: What is the operating voltage range of the 8N3SV76FC-0148CDI8? A: The operating voltage range can vary depending on the specific model, but it is typically designed to work within a certain voltage range, such as 3.3V to 5V.

  7. Q: Is the 8N3SV76FC-0148CDI8 compatible with other components or systems? A: Yes, this component is designed to be compatible with other electronic components and can be integrated into various systems based on the specific requirements.

  8. Q: Can the 8N3SV76FC-0148CDI8 be used in high-temperature environments? A: The temperature range for this component can vary, but some models may be designed to operate in high-temperature environments, such as industrial applications.

  9. Q: Are there any recommended precautions when using the 8N3SV76FC-0148CDI8? A: It is always recommended to follow the manufacturer's guidelines and datasheet for proper usage, including precautions related to ESD protection, soldering techniques, and voltage limitations.

  10. Q: Where can I find more information about the 8N3SV76FC-0148CDI8? A: You can find more detailed information about this component, including datasheets, specifications, and application notes, on the manufacturer's website or by contacting their customer support.