IDT5T929-10NLGI8

Overview

Category

IDT5T929-10NLGI8 belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal processing and control.

Characteristics

• High performance
• Low power consumption
• Compact size
• Reliable operation

Package

The IDT5T929-10NLGI8 is available in a small outline package (SOP) with 10 pins.

Essence

This integrated circuit is designed to provide efficient signal processing and control capabilities for various electronic applications.

Packaging/Quantity

The IDT5T929-10NLGI8 is typically packaged in reels or tubes, with a quantity of 250 units per package.

Specifications and Parameters

• Operating voltage: 3.3V
• Operating temperature range: -40°C to +85°C
• Input/output logic levels: CMOS/TTL compatible
• Maximum clock frequency: 100 MHz
• Number of input/output channels: 8

Pin Configuration

The pin configuration of IDT5T929-10NLGI8 is as follows:

| Pin Number | Name | Description | |------------|------|-------------| | 1 | VCC | Power supply voltage | | 2 | GND | Ground reference | | 3 | IN1 | Input channel 1 | | 4 | IN2 | Input channel 2 | | 5 | IN3 | Input channel 3 | | 6 | IN4 | Input channel 4 | | 7 | OUT1 | Output channel 1 | | 8 | OUT2 | Output channel 2 |

Functional Characteristics

• Signal amplification and conditioning
• Logic level conversion
• Signal routing and switching
• Noise filtering and suppression

Advantages and Disadvantages

Advantages

• High performance signal processing
• Low power consumption
• Compact size for space-constrained applications
• Reliable operation in various environments

Disadvantages

• Limited number of input/output channels
• Restricted maximum clock frequency

Applicable Range of Products

The IDT5T929-10NLGI8 is suitable for a wide range of electronic devices, including: - Consumer electronics - Industrial automation systems - Communication equipment - Automotive electronics

Working Principles

The IDT5T929-10NLGI8 operates based on the principles of integrated circuit design, utilizing various electronic components and logic circuits to process and control signals.

Detailed Application Field Plans

The IDT5T929-10NLGI8 can be applied in the following fields: 1. Audio/video processing systems 2. Data communication networks 3. Motor control systems 4. Sensor interface circuits 5. Power management systems

Detailed Alternative Models

Some alternative models to the IDT5T929-10NLGI8 include: - Texas Instruments SN74HC595N - NXP Semiconductors 74HC595D - STMicroelectronics M74HC595B1R

5 Common Technical Questions and Answers

1. Q: What is the maximum operating voltage for IDT5T929-10NLGI8? A: The maximum operating voltage is 3.3V.

2. Q: Can IDT5T929-10NLGI8 be used in automotive applications? A: Yes, it is suitable for automotive electronics.

3. Q: What is the temperature range within which IDT5T929-10NLGI8 can operate? A: It can operate within the temperature range of -40°C to +85°C.

4. Q: How many input/output channels does IDT5T929-10NLGI8 have? A: It has a total of 8 input/output channels.

5. Q: What is the package type for IDT5T929-10NLGI8? A: It is available in a small outline package (SOP) with 10 pins.

This encyclopedia entry provides an overview of the IDT5T929-10NLGI8 integrated circuit, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.