Tingnan ang mga detalye para sa mga detalye ng produkto.
BCR116E6433HTMA1
Product Category: Voltage Regulator
Basic Information Overview: - Category: Integrated Circuit - Use: Voltage regulation in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-23-5 - Essence: Regulates input voltage to a stable output voltage - Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications: - Input Voltage Range: 2.5V to 16V - Output Voltage Range: 1.2V to 15V - Dropout Voltage: 200mV at 100mA - Quiescent Current: 40µA - Load Regulation: 0.1% typical - Line Regulation: 0.03% typical
Detailed Pin Configuration: - Pin 1: Enable (EN) - Pin 2: Ground (GND) - Pin 3: Feedback (FB) - Pin 4: No Connection (NC) - Pin 5: Output (VOUT)
Functional Features: - Low dropout voltage - Low quiescent current - Thermal shutdown protection - Short-circuit current limit - Reverse battery protection
Advantages: - High precision voltage regulation - Wide input voltage range - Small package size - Low power consumption
Disadvantages: - Limited maximum output current - Sensitive to external noise
Working Principles: The BCR116E6433HTMA1 regulates the output voltage by comparing it to an internal reference voltage. It adjusts the pass transistor to maintain a stable output voltage despite changes in input voltage and load.
Detailed Application Field Plans: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models: - LM1117 - MCP1703 - AP2112
This integrated circuit, BCR116E6433HTMA1, is widely used in various electronic devices due to its high precision voltage regulation and low power consumption. Its small package size makes it suitable for compact designs in applications such as battery-powered devices, portable electronics, and IoT devices. However, designers should be mindful of its limited maximum output current and sensitivity to external noise when integrating it into their circuits.
[Word Count: 311]
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng BCR116E6433HTMA1 sa mga teknikal na solusyon
What is BCR116E6433HTMA1?
- BCR116E6433HTMA1 is a high-precision voltage regulator designed for use in various technical solutions.
What are the key features of BCR116E6433HTMA1?
- The key features include high accuracy, low dropout voltage, low quiescent current, and thermal shutdown protection.
What are the typical applications of BCR116E6433HTMA1?
- Typical applications include battery-powered devices, portable instruments, automotive electronics, and industrial control systems.
What is the input voltage range for BCR116E6433HTMA1?
- The input voltage range is typically between 2.5V and 18V.
What is the output voltage range for BCR116E6433HTMA1?
- The output voltage range is adjustable from 1.2V to 15V.
How does BCR116E6433HTMA1 achieve high precision?
- It utilizes a precision voltage reference and error amplifier to maintain accurate output voltage.
Does BCR116E6433HTMA1 have built-in protection features?
- Yes, it includes overcurrent protection and thermal shutdown to safeguard against potential damage.
What is the typical load regulation of BCR116E6433HTMA1?
- The load regulation is typically within ±0.5%.
Can BCR116E6433HTMA1 be used in automotive applications?
- Yes, it is suitable for automotive electronics due to its robust design and wide operating temperature range.
Are there any specific layout considerations for using BCR116E6433HTMA1?
- Proper PCB layout and thermal management are important for optimal performance, and the datasheet provides guidelines for these aspects.