Infineon Technologies
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
BTS621L1 E3230
Tingnan ang Detalye DataSheets

BTS621L1 E3230

Product Overview

  • Category: Power MOSFET
  • Use: Electronic component used for power switching applications
  • Characteristics:
    • High voltage capability
    • Low on-resistance
    • Fast switching speed
    • Enhanced thermal performance
  • Package: TO-263-7 (D2PAK)
  • Essence: BTS621L1 E3230 is a high-performance power MOSFET designed for various power switching applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Voltage Rating: 60V
  • Current Rating: 30A
  • On-Resistance: 8.5mΩ
  • Gate Threshold Voltage: 2.5V
  • Gate Charge: 35nC
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BTS621L1 E3230 features the following pin configuration:

  1. Pin 1: Source (S)
  2. Pin 2: Gate (G)
  3. Pin 3: Drain (D)
  4. Pin 4: Drain (D)
  5. Pin 5: Sense (S)
  6. Pin 6: Sense (S)
  7. Pin 7: Ground (GND)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Fast switching speed enables rapid power switching transitions.
  • Enhanced thermal performance ensures reliable operation under high temperature conditions.

Advantages and Disadvantages

Advantages: - High voltage capability - Low on-resistance - Fast switching speed - Enhanced thermal performance

Disadvantages: - Limited current rating compared to some other power MOSFETs - Relatively high gate threshold voltage

Working Principles

The BTS621L1 E3230 operates based on the principles of metal-oxide-semiconductor field-effect transistors (MOSFETs). When a suitable voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the source and drain terminals. By modulating the gate voltage, the MOSFET can be switched on or off, allowing for efficient power switching.

Detailed Application Field Plans

The BTS621L1 E3230 is commonly used in the following applications:

  1. Automotive electronics
  2. Industrial automation
  3. Power supplies
  4. Motor control systems
  5. Battery management systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to BTS621L1 E3230 are:

  1. IRF3205
  2. FDP8870
  3. STP55NF06L
  4. IPP60R099CP
  5. AUIRFZ44ZS

These models offer similar specifications and functionality, providing flexibility in choosing the most suitable power MOSFET for specific applications.

Word count: 312 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng BTS621L1 E3230 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of BTS621L1 E3230 in technical solutions:

  1. Question: What is the maximum voltage rating of BTS621L1 E3230?
    Answer: The maximum voltage rating of BTS621L1 E3230 is 60V.

  2. Question: What is the maximum current rating of BTS621L1 E3230?
    Answer: The maximum current rating of BTS621L1 E3230 is 30A.

  3. Question: Can BTS621L1 E3230 be used for both high-side and low-side applications?
    Answer: Yes, BTS621L1 E3230 can be used for both high-side and low-side applications.

  4. Question: Does BTS621L1 E3230 have built-in overcurrent protection?
    Answer: Yes, BTS621L1 E3230 has built-in overcurrent protection to safeguard against excessive current flow.

  5. Question: What is the typical on-resistance of BTS621L1 E3230?
    Answer: The typical on-resistance of BTS621L1 E3230 is 6.5mΩ.

  6. Question: Is BTS621L1 E3230 suitable for automotive applications?
    Answer: Yes, BTS621L1 E3230 is designed to meet the stringent requirements of automotive applications.

  7. Question: Can BTS621L1 E3230 handle short-circuit conditions?
    Answer: Yes, BTS621L1 E3230 is capable of handling short-circuit conditions without damage.

  8. Question: Does BTS621L1 E3230 have a thermal shutdown feature?
    Answer: Yes, BTS621L1 E3230 incorporates a thermal shutdown feature to prevent overheating.

  9. Question: What is the operating temperature range of BTS621L1 E3230?
    Answer: The operating temperature range of BTS621L1 E3230 is -40°C to +150°C.

  10. Question: Can BTS621L1 E3230 be used in industrial control systems?
    Answer: Yes, BTS621L1 E3230 is suitable for various industrial control system applications.

Please note that these answers are general and may vary depending on the specific application and requirements.