Intersil
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ISL28006FHADJZ-T7
Tingnan ang Detalye DataSheets

ISL28006FHADJZ-T7

Product Overview

Category

ISL28006FHADJZ-T7 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for precision current sensing applications.

Characteristics

  • High accuracy and resolution
  • Wide input voltage range
  • Low offset voltage and drift
  • Adjustable gain and offset
  • Temperature compensation

Package

ISL28006FHADJZ-T7 is available in a small form factor package, such as QFN or DFN.

Essence

The essence of ISL28006FHADJZ-T7 lies in its ability to accurately measure current in various applications.

Packaging/Quantity

Typically, this product is supplied in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: ±320mV
  • Offset Voltage: ±50µV
  • Gain Error: ±0.1%
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ISL28006FHADJZ-T7 IC has the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. IN+: Positive input terminal for current measurement
  4. IN-: Negative input terminal for current measurement
  5. OUT: Output voltage proportional to the measured current
  6. ADJ: Adjust pin for gain and offset calibration

Functional Features

  • High-resolution current sensing
  • Adjustable gain and offset for calibration
  • Temperature compensation for accurate measurements
  • Fast response time
  • Low power consumption

Advantages and Disadvantages

Advantages

  • High accuracy and resolution
  • Wide input voltage range
  • Adjustable gain and offset for calibration
  • Temperature compensation for accurate measurements

Disadvantages

  • Limited availability in certain package options
  • Relatively higher cost compared to some alternatives

Working Principles

ISL28006FHADJZ-T7 utilizes a precision current-sensing technique based on the Hall effect. It measures the magnetic field generated by the current flowing through a conductor and converts it into an output voltage proportional to the current.

Detailed Application Field Plans

ISL28006FHADJZ-T7 finds applications in various fields, including:

  1. Power management systems
  2. Battery monitoring and protection
  3. Motor control systems
  4. Industrial automation
  5. Energy monitoring and metering

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL28006FHADJZ-T7 are:

  1. INA219
  2. ACS712
  3. MAX9926
  4. AD8210
  5. LTC6101

These models offer similar functionality and can be suitable replacements depending on specific requirements.

Note: The content provided above is approximately 300 words. Additional information or details can be added to meet the required word count of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ISL28006FHADJZ-T7 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of ISL28006FHADJZ-T7 in technical solutions:

  1. Q: What is ISL28006FHADJZ-T7? A: ISL28006FHADJZ-T7 is a high-side current sense amplifier designed for precise current measurement in various applications.

  2. Q: What is the voltage supply range for ISL28006FHADJZ-T7? A: The voltage supply range for ISL28006FHADJZ-T7 is from 2.7V to 5.5V.

  3. Q: What is the maximum input voltage that ISL28006FHADJZ-T7 can handle? A: ISL28006FHADJZ-T7 can handle a maximum input voltage of 60V.

  4. Q: Can ISL28006FHADJZ-T7 measure both positive and negative currents? A: No, ISL28006FHADJZ-T7 can only measure positive currents.

  5. Q: What is the output voltage range of ISL28006FHADJZ-T7? A: The output voltage range of ISL28006FHADJZ-T7 is from 0V to VCC.

  6. Q: Does ISL28006FHADJZ-T7 have built-in overcurrent protection? A: No, ISL28006FHADJZ-T7 does not have built-in overcurrent protection. External circuitry may be required for overcurrent protection.

  7. Q: Can ISL28006FHADJZ-T7 operate in high-temperature environments? A: Yes, ISL28006FHADJZ-T7 is designed to operate in high-temperature environments, with a temperature range of -40°C to +125°C.

  8. Q: What is the typical gain accuracy of ISL28006FHADJZ-T7? A: The typical gain accuracy of ISL28006FHADJZ-T7 is ±0.5%.

  9. Q: Can ISL28006FHADJZ-T7 be used in battery monitoring applications? A: Yes, ISL28006FHADJZ-T7 can be used in battery monitoring applications for accurate current measurement.

  10. Q: Does ISL28006FHADJZ-T7 require external calibration? A: No, ISL28006FHADJZ-T7 does not require external calibration. It has an integrated precision voltage reference for accurate measurements.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.