Intersil
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ISL6127IR-T
Tingnan ang Detalye DataSheets

ISL6127IR-T

Product Overview

Category

ISL6127IR-T belongs to the category of integrated circuits (ICs).

Use

The ISL6127IR-T is primarily used as a voltage regulator in electronic devices.

Characteristics

  • Integrated circuit
  • Voltage regulator
  • Small form factor
  • High efficiency
  • Low power consumption

Package

ISL6127IR-T comes in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of ISL6127IR-T lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

ISL6127IR-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 60µA

Detailed Pin Configuration

The ISL6127IR-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Low dropout voltage enables operation even with low input voltages.
  • Enable pin provides control over the device's operation.
  • Feedback pin allows for precise voltage regulation.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in energy savings.
  • Wide input voltage range enhances compatibility.
  • Low dropout voltage enables operation with low input voltages.

Disadvantages

  • Limited maximum output current may restrict certain high-power applications.
  • Operating temperature range may not be suitable for extreme environments.

Working Principles

The ISL6127IR-T operates based on a feedback control mechanism. It continuously monitors the output voltage and adjusts the internal circuitry to maintain a stable and accurate output voltage, regardless of variations in the input voltage or load conditions.

Detailed Application Field Plans

ISL6127IR-T finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6127IR-T are: - LM317T - LT1084CP-5 - TPS7A4700

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, the ISL6127IR-T is an integrated circuit voltage regulator known for its compact size, high efficiency, and wide input voltage range. While it has limitations in terms of maximum output current and operating temperature range, it offers precise voltage regulation and finds applications in various electronic devices. Alternative models such as LM317T, LT1084CP-5, and TPS7A4700 can be considered as substitutes.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ISL6127IR-T sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of ISL6127IR-T in technical solutions:

  1. Q: What is ISL6127IR-T? A: ISL6127IR-T is a high-performance, dual-channel synchronous buck controller IC used for voltage regulation in various technical solutions.

  2. Q: What is the input voltage range supported by ISL6127IR-T? A: The input voltage range supported by ISL6127IR-T is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6127IR-T? A: The output voltage range achievable with ISL6127IR-T depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: Can ISL6127IR-T support multiple output voltages simultaneously? A: Yes, ISL6127IR-T can support multiple output voltages simultaneously by configuring each channel independently.

  5. Q: What is the maximum output current that ISL6127IR-T can handle? A: The maximum output current that ISL6127IR-T can handle depends on the design and thermal considerations, but it can typically handle up to 20A per channel.

  6. Q: Does ISL6127IR-T have any built-in protection features? A: Yes, ISL6127IR-T has various built-in protection features like overcurrent protection (OCP), overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  7. Q: Can ISL6127IR-T operate in a wide temperature range? A: Yes, ISL6127IR-T is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  8. Q: What type of control method does ISL6127IR-T use? A: ISL6127IR-T uses voltage mode control for regulating the output voltage.

  9. Q: Can ISL6127IR-T be used in battery-powered applications? A: Yes, ISL6127IR-T can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  10. Q: Are there any evaluation boards or reference designs available for ISL6127IR-T? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for ISL6127IR-T, which can help in the development and testing of technical solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.