Intersil
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ISL6612BCR-T
Tingnan ang Detalye DataSheets

ISL6612BCR-T

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low power consumption - Wide input voltage range - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: BGA (Ball Grid Array)

Essence: The ISL6612BCR-T is a voltage regulator IC designed for efficient power management in various electronic devices.

Packaging/Quantity: The ISL6612BCR-T is available in tape and reel packaging, with 250 units per reel.

Specifications

The specifications of the ISL6612BCR-T are as follows:

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 12A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6612BCR-T has a total of 20 pins. The detailed pin configuration is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. VCC: Supply voltage
  4. FB: Feedback voltage
  5. COMP: Compensation node
  6. SS: Soft-start capacitor
  7. EN: Enable control
  8. PGND: Power ground
  9. BOOT: Bootstrap capacitor
  10. LX: Switching node
  11. AGND: Analog ground
  12. VREF: Reference voltage
  13. OCSET: Overcurrent threshold setting
  14. SS/TRACK: Soft-start or tracking control
  15. SYNC: Synchronization input
  16. RT: Oscillator resistor
  17. CT: Oscillator capacitor
  18. PGOOD: Power good indicator
  19. VSENSE: Current sense voltage
  20. SS/TRACK: Soft-start or tracking control

Functional Features

The ISL6612BCR-T offers the following functional features:

  1. High Efficiency: The IC provides efficient power conversion, minimizing energy loss.
  2. Low Power Consumption: It consumes minimal power during operation, enhancing overall system efficiency.
  3. Wide Input Voltage Range: The IC can handle a wide range of input voltages, making it suitable for various applications.
  4. Adjustable Output Voltage: The output voltage can be easily adjusted to meet specific requirements.
  5. Overcurrent Protection: The IC incorporates overcurrent protection to prevent damage to the circuitry.
  6. Thermal Shutdown Protection: It includes thermal shutdown protection to safeguard against overheating.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Wide input voltage range allows for versatile application. - Adjustable output voltage provides flexibility. - Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - BGA package may require specialized equipment for soldering and rework.

Working Principles

The ISL6612BCR-T operates based on a pulse-width modulation (PWM) technique. It regulates the output voltage by controlling the duty cycle of the switching transistor. By adjusting the duty cycle, the IC maintains a stable output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The ISL6612BCR-T is commonly used in the following application fields:

  1. Power Supplies: It is utilized in various power supply designs, including AC/DC converters, DC/DC converters, and battery chargers.
  2. Industrial Equipment: The IC finds application in industrial equipment such as motor drives, robotics, and automation systems.
  3. Telecommunications: It is employed in telecommunications equipment like routers, switches, and base stations.
  4. Automotive Electronics: The IC is suitable for automotive applications, including electric vehicles, powertrain systems, and infotainment systems.

Detailed and Complete Alternative Models

Some alternative models to the ISL6612BCR-T include:

  1. LM2576-ADJ: A voltage regulator IC with adjustable output voltage and a maximum output current of 3A.
  2. LT1084CP-ADJ: An adjustable linear voltage regulator capable of delivering up to 5A of output current.
  3. TPS5430DDAR: A synchronous buck converter IC offering high efficiency and a maximum output current of 3A.

These alternative models provide similar functionality and can be considered as substitutes for the ISL6612BCR-T depending on specific requirements.

Word count: 534 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ISL6612BCR-T sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of ISL6612BCR-T in technical solutions:

  1. Q: What is ISL6612BCR-T? A: ISL6612BCR-T is a high-performance synchronous rectified buck MOSFET driver IC.

  2. Q: What is the maximum input voltage supported by ISL6612BCR-T? A: The maximum input voltage supported by ISL6612BCR-T is typically 14V.

  3. Q: What is the output current capability of ISL6612BCR-T? A: ISL6612BCR-T can drive up to 12A of continuous output current.

  4. Q: Can ISL6612BCR-T be used for both high-side and low-side MOSFET driving? A: Yes, ISL6612BCR-T can be used for both high-side and low-side MOSFET driving.

  5. Q: Does ISL6612BCR-T have built-in protection features? A: Yes, ISL6612BCR-T has built-in protection features such as overcurrent protection and thermal shutdown.

  6. Q: What is the operating frequency range of ISL6612BCR-T? A: The operating frequency range of ISL6612BCR-T is typically between 100kHz and 1MHz.

  7. Q: Can ISL6612BCR-T be used in automotive applications? A: Yes, ISL6612BCR-T is suitable for automotive applications as it meets the AEC-Q100 standard.

  8. Q: What is the recommended input voltage for ISL6612BCR-T? A: The recommended input voltage for ISL6612BCR-T is typically between 4.5V and 14V.

  9. Q: Does ISL6612BCR-T require an external bootstrap diode? A: No, ISL6612BCR-T does not require an external bootstrap diode as it has an integrated bootstrap diode.

  10. Q: What is the package type of ISL6612BCR-T? A: ISL6612BCR-T is available in a compact 8-pin SOIC package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.