Tingnan ang mga detalye para sa mga detalye ng produkto.
IXFH26N50P
Product Overview
Category
The IXFH26N50P belongs to the category of power MOSFETs.
Use
It is commonly used in power electronics applications such as motor control, power supplies, and inverters.
Characteristics
- High voltage capability
- Low on-resistance
- Fast switching speed
- High reliability
Package
The IXFH26N50P is typically available in a TO-247 package.
Essence
This MOSFET is essential for efficient power management and control in various electronic systems.
Packaging/Quantity
It is usually packaged individually and available in varying quantities depending on the supplier.
Specifications
- Voltage Rating: 500V
- Current Rating: 26A
- On-Resistance: 0.26Ω
- Gate Threshold Voltage: 4V
- Total Gate Charge: 60nC
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The IXFH26N50P typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage capability allows for use in high-power applications.
- Low on-resistance minimizes power losses and improves efficiency.
- Fast switching speed enables rapid control of power flow.
Advantages
- Suitable for high-voltage applications
- Low on-resistance leads to reduced power dissipation
- Fast switching speed enhances system performance
Disadvantages
- Higher cost compared to lower-rated MOSFETs
- May require additional circuitry for driving the gate at higher voltages
Working Principles
The IXFH26N50P operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.
Detailed Application Field Plans
The IXFH26N50P is widely used in the following applications: - Motor drives - Power supplies - Inverters - Renewable energy systems
Detailed and Complete Alternative Models
Some alternative models to the IXFH26N50P include: - IRFP4668PbF - STW26NM60N - FDPF33N25T
In conclusion, the IXFH26N50P power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for various power electronics applications. Its advantages include efficient power management and control, while potential disadvantages include higher cost and additional circuitry requirements for certain applications.
[Word count: 346]
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng IXFH26N50P sa mga teknikal na solusyon
What is IXFH26N50P?
- IXFH26N50P is a high voltage MOSFET designed for various technical solutions requiring efficient power management.
What is the maximum voltage and current rating of IXFH26N50P?
- The maximum voltage rating of IXFH26N50P is 500V, and the maximum continuous drain current is 26A.
What are the typical applications of IXFH26N50P?
- IXFH26N50P is commonly used in switch mode power supplies, motor control, and other high voltage applications.
What are the key features of IXFH26N50P?
- Some key features include low on-resistance, fast switching speed, and high input impedance.
What is the thermal resistance of IXFH26N50P?
- The thermal resistance from junction to case (RθJC) is typically around 0.6°C/W.
Is IXFH26N50P suitable for high frequency applications?
- Yes, IXFH26N50P is suitable for high frequency applications due to its fast switching speed and low gate charge.
Does IXFH26N50P require a heat sink for operation?
- It is recommended to use a heat sink for IXFH26N50P to ensure proper thermal management, especially in high power applications.
Can IXFH26N50P be used in automotive applications?
- Yes, IXFH26N50P is suitable for automotive applications such as electric vehicle power systems and battery management.
What are the potential alternatives to IXFH26N50P?
- Some potential alternatives include other high voltage MOSFETs with similar specifications from different manufacturers.
Where can I find the detailed datasheet for IXFH26N50P?
- The detailed datasheet for IXFH26N50P can be found on the manufacturer's official website or through authorized distributors.