IXYS
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
IXYN100N65A3
Tingnan ang Detalye DataSheets

IXYN100N65A3

Product Overview

Category

The IXYN100N65A3 belongs to the category of power MOSFETs.

Use

It is used for high-power applications such as in power supplies, motor control, and inverters.

Characteristics

  • High voltage and current handling capability
  • Low on-state resistance
  • Fast switching speed
  • Low gate drive power requirement

Package

The IXYN100N65A3 is available in a TO-247 package.

Essence

The essence of the IXYN100N65A3 lies in its ability to efficiently handle high power levels with low losses.

Packaging/Quantity

It is typically packaged in reels or tubes and is available in varying quantities based on customer requirements.

Specifications

  • Voltage Rating: 650V
  • Current Rating: 100A
  • On-State Resistance: 0.065Ω
  • Gate-Source Threshold Voltage: 4V
  • Total Gate Charge: 160nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The IXYN100N65A3 has a standard pin configuration with three pins: gate, drain, and source.

Functional Features

  • High voltage and current handling capacity
  • Low conduction losses
  • Fast switching speed
  • Enhanced thermal performance

Advantages

  • Suitable for high-power applications
  • Efficient power management
  • Reduced heat dissipation
  • Enhanced system reliability

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful consideration of driving circuitry due to high gate charge

Working Principles

The IXYN100N65A3 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IXYN100N65A3 is well-suited for use in: - High-power switch mode power supplies - Motor drives for industrial applications - Inverters for renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the IXYN100N65A3 include: - IXYN80N65A3 - IXYN120N65A3 - IXYN100N60A3

In conclusion, the IXYN100N65A3 is a high-performance power MOSFET designed for demanding applications that require efficient power management and high reliability.

[Word count: 331]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng IXYN100N65A3 sa mga teknikal na solusyon

  1. What is the maximum voltage rating of IXYN100N65A3?

    • The maximum voltage rating of IXYN100N65A3 is 650V.

  2. What is the maximum continuous drain current of IXYN100N65A3?

    • The maximum continuous drain current of IXYN100N65A3 is 100A.

  3. What type of package does IXYN100N65A3 come in?

    • IXYN100N65A3 comes in a TO-264 package.

  4. What is the typical on-resistance of IXYN100N65A3?

    • The typical on-resistance of IXYN100N65A3 is 0.065 ohms.

  5. Is IXYN100N65A3 suitable for high-power applications?

    • Yes, IXYN100N65A3 is suitable for high-power applications due to its high voltage and current ratings.

  6. Does IXYN100N65A3 require a heat sink for proper operation?

    • It is recommended to use a heat sink with IXYN100N65A3 to ensure proper thermal management, especially in high-power applications.

  7. What are the typical applications for IXYN100N65A3?

    • IXYN100N65A3 is commonly used in motor control, power supplies, and other high-power switching applications.

  8. Can IXYN100N65A3 be used in automotive applications?

    • Yes, IXYN100N65A3 is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.

  9. What is the gate threshold voltage of IXYN100N65A3?

    • The gate threshold voltage of IXYN100N65A3 is typically around 4V.

  10. Is IXYN100N65A3 RoHS compliant?

    • Yes, IXYN100N65A3 is RoHS compliant, making it suitable for use in environmentally sensitive applications.