Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
LT1460DCS8-10#PBF

LT1460DCS8-10#PBF

Product Overview

Category

The LT1460DCS8-10#PBF belongs to the category of voltage references.

Use

This product is primarily used as a precision reference voltage source in various electronic circuits.

Characteristics

  • High accuracy: The LT1460DCS8-10#PBF offers exceptional precision, ensuring reliable and consistent voltage output.
  • Low temperature coefficient: It exhibits minimal changes in voltage output with temperature variations, making it suitable for applications requiring stable performance over a wide temperature range.
  • Low noise: The voltage reference produces minimal electrical noise, enabling clean and accurate signal processing.
  • Low power consumption: It consumes very low power, making it energy-efficient and suitable for battery-powered devices.

Package

The LT1460DCS8-10#PBF is available in an 8-pin surface mount package (SOIC-8).

Essence

The essence of this product lies in its ability to provide a stable and precise reference voltage, which is crucial for maintaining accurate operation of electronic circuits.

Packaging/Quantity

The LT1460DCS8-10#PBF is typically sold in reels containing a specified quantity of units. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Output Voltage: 10V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: ±10ppm/°C
  • Supply Voltage Range: 2.7V to 40V
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT1460DCS8-10#PBF features the following pin configuration:

  1. VOUT: Output voltage pin
  2. GND: Ground pin
  3. NC: No connection
  4. NC: No connection
  5. NC: No connection
  6. NC: No connection
  7. V+: Positive supply voltage pin
  8. TRIM: Trim pin for fine-tuning the output voltage (optional)

Functional Features

  • High precision: The LT1460DCS8-10#PBF provides a highly accurate and stable reference voltage, ensuring precise operation of electronic circuits.
  • Low power consumption: It consumes minimal power, making it suitable for low-power applications and extending battery life.
  • Wide supply voltage range: The voltage reference can operate within a wide range of supply voltages, enhancing its versatility in various circuit designs.
  • Low temperature coefficient: With a low temperature coefficient, the LT1460DCS8-10#PBF maintains consistent performance across different temperature conditions.

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Low power consumption
  • Wide supply voltage range
  • Low temperature coefficient

Disadvantages

  • Limited output voltage options (only 10V in this model)
  • Requires external trimming for precise voltage adjustment (if needed)

Working Principles

The LT1460DCS8-10#PBF utilizes advanced semiconductor technology to generate a precise reference voltage. It employs a bandgap voltage reference circuit that compensates for temperature variations, ensuring a stable output voltage over a wide temperature range. The internal circuitry is designed to minimize noise and provide excellent line regulation.

Detailed Application Field Plans

The LT1460DCS8-10#PBF finds applications in various fields, including:

  1. Precision measurement equipment: It is used as a voltage reference in multimeters, oscilloscopes, and other precision measurement instruments.
  2. Industrial control systems: The voltage reference ensures accurate signal processing in industrial automation and control systems.
  3. Communication devices: It is employed in communication equipment to maintain stable voltage levels for reliable signal transmission.
  4. Power management circuits: The LT1460DCS8-10#PBF is utilized in power management circuits to provide a stable reference voltage for efficient power regulation.

Detailed and Complete Alternative Models

  1. LT1460DCS8-5#PBF: This model offers an output voltage of 5V, suitable for applications requiring a lower reference voltage.
  2. LT1460DCS8-2.5#PBF: It provides an output voltage of 2.5V, catering to circuits that require a lower reference voltage level.
  3. LT1460DCS8-12#PBF: This alternative model offers an output voltage of 12V, suitable for specific applications requiring a higher reference voltage.

These alternative models provide different output voltage options to accommodate diverse circuit requirements.

Word count: 594 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng LT1460DCS8-10#PBF sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of LT1460DCS8-10#PBF in technical solutions:

  1. Question: What is the LT1460DCS8-10#PBF?
    Answer: The LT1460DCS8-10#PBF is a precision voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate voltage reference of 10V.

  2. Question: What is the typical application of the LT1460DCS8-10#PBF?
    Answer: The LT1460DCS8-10#PBF is commonly used as a reference voltage source in various electronic systems, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), power supplies, and sensor circuits.

  3. Question: What is the voltage accuracy of the LT1460DCS8-10#PBF?
    Answer: The LT1460DCS8-10#PBF has a voltage accuracy of ±0.05% over the specified temperature range.

  4. Question: What is the temperature range for the LT1460DCS8-10#PBF?
    Answer: The LT1460DCS8-10#PBF operates over a temperature range of -40°C to +85°C.

  5. Question: How much current can the LT1460DCS8-10#PBF supply?
    Answer: The LT1460DCS8-10#PBF can supply up to 10mA of output current.

  6. Question: Can the LT1460DCS8-10#PBF operate from a single power supply?
    Answer: Yes, the LT1460DCS8-10#PBF can operate from a single power supply, typically between 2.5V and 36V.

  7. Question: Does the LT1460DCS8-10#PBF require any external components?
    Answer: No, the LT1460DCS8-10#PBF is a self-contained voltage reference and does not require any external components for operation.

  8. Question: What is the output voltage stability of the LT1460DCS8-10#PBF?
    Answer: The LT1460DCS8-10#PBF has excellent long-term stability, with a typical drift of 10ppm per 1,000 hours.

  9. Question: Can the LT1460DCS8-10#PBF be used in battery-powered applications?
    Answer: Yes, the LT1460DCS8-10#PBF is suitable for battery-powered applications due to its low quiescent current consumption of only 60µA.

  10. Question: Is the LT1460DCS8-10#PBF available in other package options?
    Answer: Yes, besides the SOT-23-8 package (LT1460DCS8-10#PBF), the LT1460 series is available in various other package options, such as TO-92, SO-8, and MSOP-8.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.