Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
LTC4224IMS-2#PBF

LTC4224IMS-2#PBF

Product Overview

Category

The LTC4224IMS-2#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power supply and protection applications in various electronic systems.

Characteristics

  • Integrated power supply and protection functions
  • High efficiency and low power consumption
  • Wide input voltage range
  • Overvoltage and undervoltage protection
  • Current limiting and short-circuit protection
  • Thermal shutdown protection

Package

The LTC4224IMS-2#PBF is available in a small MSOP-10 package, which offers compactness and ease of integration into different circuit designs.

Essence

The essence of LTC4224IMS-2#PBF lies in its ability to provide reliable power supply and protection features, ensuring the safe operation of electronic systems.

Packaging/Quantity

This product is typically supplied in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Input Voltage Range: 2.9V to 18V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 50µA (typical)
  • Overvoltage Threshold: Adjustable from 3.5V to 16V
  • Undervoltage Threshold: Adjustable from 1.8V to 14V
  • Maximum Continuous Current: 2A
  • Short-Circuit Current Limit: 2.5A (typical)

Detailed Pin Configuration

The LTC4224IMS-2#PBF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GATE: Gate control pin for external N-channel MOSFET
  3. FLT: Fault output pin
  4. EN: Enable pin for power supply
  5. OV: Overvoltage threshold adjustment pin
  6. UV: Undervoltage threshold adjustment pin
  7. GND: Ground pin
  8. VOUT: Output voltage pin
  9. SENSE+: Positive current sense input pin
  10. SENSE-: Negative current sense input pin

Functional Features

  1. Integrated Power Supply and Protection: The LTC4224IMS-2#PBF combines power supply control, overvoltage/undervoltage protection, current limiting, and short-circuit protection in a single IC.
  2. Wide Input Voltage Range: It supports a wide range of input voltages from 2.9V to 18V, making it suitable for various applications.
  3. Adjustable Thresholds: The overvoltage and undervoltage thresholds can be adjusted according to the specific requirements of the system.
  4. Fault Output: The FLT pin provides a fault indication signal when any protection feature is triggered.
  5. Low Quiescent Current: With a typical quiescent current of 50µA, the LTC4224IMS-2#PBF minimizes power consumption.

Advantages and Disadvantages

Advantages

  • Simplifies power supply design by integrating multiple functions into a single IC
  • Provides robust protection against overvoltage, undervoltage, and short-circuits
  • Wide input voltage range allows for versatile application possibilities
  • Compact package enables easy integration into space-constrained designs
  • Low quiescent current helps conserve power in standby or low-load conditions

Disadvantages

  • Limited maximum continuous current of 2A may not be sufficient for high-power applications
  • Requires external N-channel MOSFET for gate control, adding complexity to the circuit design

Working Principles

The LTC4224IMS-2#PBF operates by continuously monitoring the input voltage and comparing it with the user-adjustable overvoltage and undervoltage thresholds. When the input voltage exceeds the set overvoltage threshold, the IC shuts off the external MOSFET to protect downstream components. Similarly, if the input voltage falls below the undervoltage threshold, the MOSFET is turned off to prevent underpowered operation. The IC also incorporates current limiting and short-circuit protection to safeguard against excessive current flow. In case of any fault condition, the FLT pin provides an indication signal.

Detailed Application Field Plans

The LTC4224IMS-2#PBF finds applications in various fields, including but not limited to:

  1. Industrial Control Systems: Provides power supply and protection for control units, sensors, and actuators.
  2. Automotive Electronics: Ensures reliable power delivery and protection for automotive control modules and infotainment systems.
  3. Telecommunications: Safeguards sensitive telecom equipment from voltage fluctuations and short-circuits.
  4. Medical Devices: Offers power management and protection features for medical instruments and devices.
  5. Consumer Electronics: Enables safe and efficient power supply in portable devices, home appliances, and audio/video equipment.

Detailed and Complete Alternative

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng LTC4224IMS-2#PBF sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of LTC4224IMS-2#PBF in technical solutions:

  1. Q: What is LTC4224IMS-2#PBF? A: LTC4224IMS-2#PBF is a specific model number for a power supply IC manufactured by Linear Technology (now part of Analog Devices). It is designed for hot-swappable applications and provides protection against reverse voltage, overcurrent, and overvoltage.

  2. Q: What are the key features of LTC4224IMS-2#PBF? A: The key features of LTC4224IMS-2#PBF include dual ideal diode controllers, adjustable current limit, reverse voltage protection, undervoltage lockout, and fault status indicators.

  3. Q: How does LTC4224IMS-2#PBF provide reverse voltage protection? A: LTC4224IMS-2#PBF uses an integrated ideal diode controller to prevent reverse current flow, protecting the circuit from damage.

  4. Q: Can LTC4224IMS-2#PBF be used for hot-swapping applications? A: Yes, LTC4224IMS-2#PBF is specifically designed for hot-swapping applications, allowing for safe insertion and removal of power sources without disrupting the system.

  5. Q: What is the maximum current limit that can be set with LTC4224IMS-2#PBF? A: The current limit of LTC4224IMS-2#PBF can be adjusted up to 20A, making it suitable for a wide range of applications.

  6. Q: Does LTC4224IMS-2#PBF have any built-in fault status indicators? A: Yes, LTC4224IMS-2#PBF has fault status indicators that provide visual indication of fault conditions such as overcurrent or reverse voltage.

  7. Q: Can LTC4224IMS-2#PBF be used in automotive applications? A: Yes, LTC4224IMS-2#PBF is suitable for automotive applications as it can handle a wide input voltage range and provides protection against reverse voltage and overcurrent.

  8. Q: What is the operating temperature range of LTC4224IMS-2#PBF? A: LTC4224IMS-2#PBF has an operating temperature range of -40°C to +85°C, making it suitable for various environments.

  9. Q: Is LTC4224IMS-2#PBF available in different package options? A: Yes, LTC4224IMS-2#PBF is available in a small MSOP-10 package, which is compact and suitable for space-constrained applications.

  10. Q: Where can I find more information about LTC4224IMS-2#PBF? A: You can find detailed information about LTC4224IMS-2#PBF, including datasheets, application notes, and technical support, on the Analog Devices website or by contacting their customer support team.