Littelfuse Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
RLD30P800UFF
Tingnan ang Detalye DataSheets

RLD30P800UFF

Product Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, overcurrent protection
  • Package: TO-220, TO-263
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Dropout Voltage: 300mV at 3A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1 (VIN): Input voltage
  • Pin 2 (GND): Ground
  • Pin 3 (VOUT): Output voltage

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Reverse Polarity Protection

Advantages and Disadvantages

  • Advantages:
    • High efficiency
    • Wide input voltage range
    • Low dropout voltage
  • Disadvantages:
    • Higher quiescent current compared to some alternatives

Working Principles

The RLD30P800UFF is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance in the regulator circuit based on the input voltage and load conditions.

Detailed Application Field Plans

  • Automotive Electronics
  • Industrial Control Systems
  • Telecommunications Equipment
  • Consumer Electronics

Detailed and Complete Alternative Models

  • LM1117
  • LT1086
  • ADP3338

This comprehensive entry provides an in-depth understanding of the RLD30P800UFF, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng RLD30P800UFF sa mga teknikal na solusyon

  1. What is RLD30P800UFF?

    • RLD30P800UFF is a high-voltage, low-dropout (LDO) linear regulator designed for use in various technical solutions.

  2. What is the input voltage range of RLD30P800UFF?

    • The input voltage range of RLD30P800UFF is typically from 4.5V to 80V.

  3. What is the output current capability of RLD30P800UFF?

    • RLD30P800UFF can provide an output current of up to 300mA.

  4. What are the typical applications of RLD30P800UFF?

    • RLD30P800UFF is commonly used in automotive, industrial, and power supply applications where a stable and regulated voltage is required.

  5. What is the dropout voltage of RLD30P800UFF?

    • The dropout voltage of RLD30P800UFF is typically around 500mV at full load.

  6. Does RLD30P800UFF have built-in thermal shutdown protection?

    • Yes, RLD30P800UFF is equipped with built-in thermal shutdown protection to prevent overheating.

  7. What is the operating temperature range of RLD30P800UFF?

    • RLD30P800UFF can operate within a temperature range of -40°C to 125°C.

  8. Is RLD30P800UFF suitable for battery-powered applications?

    • Yes, RLD30P800UFF is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  9. Can RLD30P800UFF be used in harsh environments?

    • Yes, RLD30P800UFF is designed to withstand harsh environmental conditions, making it suitable for rugged applications.

  10. What are the key features of RLD30P800UFF?

    • Some key features of RLD30P800UFF include low quiescent current, wide input voltage range, thermal shutdown protection, and high PSRR (power supply rejection ratio).