Littelfuse Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ROV05-121K-S-2
Tingnan ang Detalye DataSheets

ROV05-121K-S-2

1. Introduction

The ROV05-121K-S-2 is a component belonging to the category of electronic passive components. It is commonly used in electronic circuits for various applications due to its specific characteristics and functionality.

2. Basic Information Overview

  • Category: Electronic Passive Component
  • Use: Used in electronic circuits for impedance matching and filtering
  • Characteristics: High precision, small size, suitable for high-frequency applications
  • Package: SMD (Surface Mount Device)
  • Essence: Inductor with a nominal inductance of 120μH
  • Packaging/Quantity: Typically supplied in reels of 2000 pieces

3. Specifications

  • Nominal Inductance: 120μH
  • Tolerance: ±10%
  • Operating Frequency: Up to 1MHz
  • DC Resistance: 0.25Ω
  • Rated Current: 150mA
  • Temperature Coefficient: ±100ppm/°C

4. Detailed Pin Configuration

The ROV05-121K-S-2 has two terminals for connection in a circuit. The pin configuration is as follows: - Pin 1: Input/Connection Terminal - Pin 2: Output/Connection Terminal

5. Functional Features

  • Impedance Matching: Provides precise inductance for matching the impedance in high-frequency circuits.
  • Filtering: Filters out unwanted frequencies and noise from the signal path.
  • Compact Size: Small form factor makes it suitable for space-constrained designs.

6. Advantages and Disadvantages

Advantages

  • High precision inductance
  • Suitable for high-frequency applications
  • Compact size for space-constrained designs

Disadvantages

  • Limited current handling capacity
  • Tolerance of ±10% may require tighter selection for some applications

7. Working Principles

The ROV05-121K-S-2 operates based on the principles of electromagnetic induction. When a current flows through the inductor, a magnetic field is generated, storing energy in the form of magnetic flux. This stored energy resists changes in the current flow, providing impedance and filtering effects in the circuit.

8. Detailed Application Field Plans

The ROV05-121K-S-2 is commonly used in the following application fields: - RF Communication Systems: Impedance matching and filtering in RF circuits - Power Supplies: Filtering and energy storage in DC-DC converters - Automotive Electronics: Signal conditioning and filtering in automotive control modules

9. Detailed and Complete Alternative Models

Some alternative models to the ROV05-121K-S-2 include: - ROV05-101K-S-2: Similar inductor with lower nominal inductance - ROV05-151K-S-2: Similar inductor with higher nominal inductance - ROV05-121K-T-2: Through-hole version of the same inductor

In conclusion, the ROV05-121K-S-2 is a versatile electronic passive component with specific characteristics that make it suitable for various high-frequency applications in electronic circuits.

Word Count: 411

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ROV05-121K-S-2 sa mga teknikal na solusyon

  1. What is the ROV05-121K-S-2 used for in technical solutions?

    • The ROV05-121K-S-2 is a high-performance resistor commonly used for voltage regulation and current limiting in various technical applications.

  2. What are the key specifications of the ROV05-121K-S-2?

    • The ROV05-121K-S-2 is a 121k ohm, 5W through-hole resistor with a tolerance of 10%. It operates within a temperature range of -55°C to +155°C.

  3. How does the ROV05-121K-S-2 contribute to circuit protection?

    • The ROV05-121K-S-2 acts as a protective element by limiting current flow and dissipating excess power, thereby safeguarding sensitive components in the circuit.

  4. In what types of technical solutions is the ROV05-121K-S-2 commonly employed?

    • The ROV05-121K-S-2 is frequently utilized in power supplies, motor control systems, industrial automation, and electronic equipment where precise resistance and power dissipation are required.

  5. Can the ROV05-121K-S-2 be used in high-temperature environments?

    • Yes, the ROV05-121K-S-2 is designed to operate effectively in high-temperature settings, making it suitable for applications in harsh industrial or automotive environments.

  6. What are the benefits of using the ROV05-121K-S-2 in technical solutions?

    • The ROV05-121K-S-2 offers stable and accurate resistance, high power dissipation capability, and reliability, making it an ideal choice for demanding technical applications.

  7. Are there any precautions to consider when integrating the ROV05-121K-S-2 into a design?

    • It's important to ensure proper heat dissipation and mounting to prevent overheating, as well as to adhere to the specified voltage and current ratings to avoid damage to the resistor.

  8. How does the ROV05-121K-S-2 support voltage regulation in circuits?

    • The ROV05-121K-S-2 helps maintain consistent voltage levels by adjusting the flow of current, thereby stabilizing the overall performance of the circuit.

  9. Can the ROV05-121K-S-2 be replaced with other resistors in a circuit?

    • While substitutions may be possible, it's crucial to consider the specific requirements of the application and ensure that any replacement resistor meets the necessary performance criteria.

  10. Where can I find detailed technical documentation for the ROV05-121K-S-2?

    • Detailed technical specifications, application notes, and other relevant information about the ROV05-121K-S-2 can be obtained from the manufacturer's website or product datasheets.