Littelfuse Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
V150LC20BPX10
Tingnan ang Detalye DataSheets

V150LC20BPX10

Product Overview

Category

The V150LC20BPX10 belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • Package: DO-214AB (SMC)
  • Essence: TVS Diode
  • Packaging/Quantity: Tape & Reel (1000 pieces)

Specifications

The V150LC20BPX10 has the following specifications: - Peak Pulse Power: 1500W - Standoff Voltage: 20V - Breakdown Voltage: 22.2V - Clamping Voltage: 32.4V - Maximum Surge Current: 50A - Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The V150LC20BPX10 TVS diode has a standard DO-214AB (SMC) package with two pins. Pin 1 is the cathode, and pin 2 is the anode.

Functional Features

  • Fast response time
  • Low clamping voltage
  • High surge current capability
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • Effective protection against transient voltage events
  • Fast response time ensures minimal impact on the protected circuit
  • RoHS compliance for environmental friendliness

Disadvantages

  • Limited to low voltage applications
  • Requires careful consideration of placement and routing for optimal performance

Working Principles

When a transient voltage event occurs, the V150LC20BPX10 TVS diode conducts and clamps the voltage to a safe level, protecting downstream components from damage. It achieves this through rapid conduction and dissipation of the transient energy.

Detailed Application Field Plans

The V150LC20BPX10 is commonly used in various electronic systems, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the V150LC20BPX10 TVS diode include: - SMAJ20A - P6SMB20A - 1.5KE20CA

In conclusion, the V150LC20BPX10 transient voltage suppressor diode provides effective protection against transient voltage events in a wide range of electronic applications, making it an essential component for ensuring the reliability and longevity of sensitive electronic systems.

Word count: 366

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng V150LC20BPX10 sa mga teknikal na solusyon

  1. What is V150LC20BPX10?

    • V150LC20BPX10 is a type of varistor, also known as a voltage-dependent resistor, which is used to protect electronic circuits from overvoltage conditions.

  2. How does V150LC20BPX10 work?

    • V150LC20BPX10 works by exhibiting a high resistance at normal operating voltages and rapidly decreasing its resistance when the voltage exceeds a certain threshold, thereby diverting excess current away from sensitive components.

  3. What are the typical applications of V150LC20BPX10?

    • V150LC20BPX10 is commonly used in surge protection devices, power supplies, telecommunication equipment, industrial control systems, and other electronic devices to safeguard against transient voltage spikes.

  4. What is the maximum voltage rating of V150LC20BPX10?

    • The maximum voltage rating of V150LC20BPX10 is 150V, indicating the highest voltage it can withstand without breaking down.

  5. What is the energy absorption capability of V150LC20BPX10?

    • V150LC20BPX10 has a specified energy absorption capacity, typically measured in joules, which indicates its ability to dissipate transient energy.

  6. How should V150LC20BPX10 be connected in a circuit?

    • V150LC20BPX10 should be connected in parallel with the load or component that needs protection, ensuring that it can divert excessive voltage away from the sensitive elements.

  7. What are the temperature specifications for V150LC20BPX10?

    • V150LC20BPX10 is designed to operate within a specific temperature range, and it's important to adhere to these specifications to ensure proper performance and reliability.

  8. Can V150LC20BPX10 be used in outdoor applications?

    • V150LC20BPX10 may have specific environmental ratings that determine its suitability for outdoor use, such as resistance to moisture, temperature variations, and UV exposure.

  9. Are there any recommended safety precautions when handling V150LC20BPX10?

    • It's important to follow standard ESD (electrostatic discharge) precautions and handle V150LC20BPX10 with care to prevent damage and ensure its effectiveness.

  10. What are the key differences between V150LC20BPX10 and other varistors?

    • V150LC20BPX10 may have unique characteristics, such as voltage clamping performance, response time, and size, that differentiate it from other varistors and make it suitable for specific technical solutions.