Macronix
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MX25L25635FMI-10G
Tingnan ang Detalye DataSheets

MX25L25635FMI-10G

Product Overview

Category

The MX25L25635FMI-10G belongs to the category of flash memory chips.

Use

This product is primarily used for data storage in various electronic devices such as computers, smartphones, tablets, and other digital devices.

Characteristics

  • High storage capacity: The MX25L25635FMI-10G offers a large storage capacity of 256 megabits (32 megabytes).
  • Fast data transfer rate: It provides high-speed data transfer, allowing for quick read and write operations.
  • Low power consumption: This flash memory chip is designed to consume minimal power, making it suitable for battery-powered devices.
  • Durable and reliable: The MX25L25635FMI-10G is built to withstand frequent read and write cycles, ensuring long-term reliability.
  • Compact package: It comes in a small form factor package, making it easy to integrate into various electronic devices.

Packaging/Quantity

The MX25L25635FMI-10G is typically packaged in tape and reel format, which facilitates automated assembly processes. It is available in quantities of 1000 units per reel.

Specifications

  • Manufacturer: Macronix International Co., Ltd.
  • Part Number: MX25L25635FMI-10G
  • Memory Type: Serial NOR Flash
  • Memory Size: 256 megabits (32 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 8-pin SOP (Small Outline Package)

Detailed Pin Configuration

The MX25L25635FMI-10G has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Enable (/WE)
  6. Hold (/HOLD)
  7. VCC (Power Supply)
  8. Ground (GND)

Functional Features

  • High-speed read and write operations
  • Sector erase and block erase functions for efficient data management
  • Protection mechanisms to prevent accidental data modification or erasure
  • Software and hardware write protection options
  • Deep power-down mode for ultra-low power consumption during standby

Advantages and Disadvantages

Advantages

  • Large storage capacity
  • Fast data transfer rate
  • Low power consumption
  • Durable and reliable
  • Compact package size

Disadvantages

  • Limited compatibility with certain devices due to the specific interface requirements
  • Relatively higher cost compared to other memory technologies

Working Principles

The MX25L25635FMI-10G utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The SPI interface allows for high-speed data transfer between the flash memory chip and the host device.

Detailed Application Field Plans

The MX25L25635FMI-10G can be used in various applications, including but not limited to: - Computer motherboards - Solid-state drives (SSDs) - Set-top boxes - Digital cameras - Printers - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. Winbond W25Q256JVSIQ - 256 megabits Serial NOR Flash, SPI interface.
  2. Micron N25Q256A13EF840E - 256 megabits Serial NOR Flash, SPI interface.
  3. Spansion S25FL256SAGNFI001 - 256 megabits Serial NOR Flash, SPI interface.

These alternative models offer similar specifications and functionality to the MX25L25635FMI-10G, providing options for different sourcing requirements or compatibility considerations.

In conclusion, the MX25L25635FMI-10G is a high-capacity flash memory chip that offers fast data transfer, low power consumption, and reliable performance. It finds applications in various electronic devices and can be replaced by alternative models with similar specifications.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MX25L25635FMI-10G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MX25L25635FMI-10G in technical solutions:

  1. Q: What is MX25L25635FMI-10G? A: MX25L25635FMI-10G is a flash memory chip manufactured by Macronix. It has a capacity of 256 megabits (32 megabytes) and operates at a maximum frequency of 104 MHz.

  2. Q: What are the typical applications of MX25L25635FMI-10G? A: MX25L25635FMI-10G is commonly used in various electronic devices such as routers, set-top boxes, digital cameras, and automotive systems for storing firmware, configuration data, or other non-volatile information.

  3. Q: What interface does MX25L25635FMI-10G support? A: MX25L25635FMI-10G supports the Serial Peripheral Interface (SPI) protocol, which allows for high-speed communication between the chip and the microcontroller or host device.

  4. Q: What is the operating voltage range of MX25L25635FMI-10G? A: MX25L25635FMI-10G operates at a voltage range of 2.7V to 3.6V, making it compatible with most standard microcontrollers and logic levels.

  5. Q: What is the maximum data transfer rate of MX25L25635FMI-10G? A: MX25L25635FMI-10G supports a maximum data transfer rate of up to 208 MHz, allowing for fast read and write operations.

  6. Q: Can MX25L25635FMI-10G be easily soldered onto a PCB? A: Yes, MX25L25635FMI-10G is available in a standard 8-pin SOIC package, which can be easily soldered onto a PCB using conventional surface mount technology.

  7. Q: Does MX25L25635FMI-10G support hardware write protection? A: Yes, MX25L25635FMI-10G provides hardware write protection through the use of write protect (WP#) and hold (HOLD#) pins, allowing for enhanced security and preventing accidental data modification.

  8. Q: Can MX25L25635FMI-10G withstand harsh environmental conditions? A: MX25L25635FMI-10G is designed to operate reliably in a wide temperature range (-40°C to +85°C) and is resistant to shock and vibration, making it suitable for various industrial and automotive applications.

  9. Q: Is MX25L25635FMI-10G backward compatible with previous flash memory chips? A: Yes, MX25L25635FMI-10G is backward compatible with earlier generations of SPI flash memory chips, ensuring easy integration into existing designs.

  10. Q: Are there any specific programming requirements for MX25L25635FMI-10G? A: MX25L25635FMI-10G can be programmed using standard SPI commands and requires a dedicated programming voltage (VPP) for initial programming or erasing operations. The datasheet provides detailed instructions on programming and usage guidelines.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the official datasheet and consult with technical experts for accurate information.