Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MAX1968EUI+

MAX1968EUI+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: The MAX1968EUI+ is a voltage regulator IC that provides a regulated output voltage for various electronic devices. It is commonly used in power management applications.

Characteristics: - Input Voltage Range: 2.7V to 5.5V - Output Voltage Range: Adjustable from 0.6V to VIN - Maximum Output Current: 500mA - Low Dropout Voltage: 120mV at 100mA - Low Quiescent Current: 40µA - High PSRR (Power Supply Rejection Ratio): 70dB at 1kHz - Thermal Shutdown Protection

Package: The MAX1968EUI+ is available in a 28-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence: This voltage regulator IC ensures stable and reliable power supply to electronic devices by regulating the input voltage to a desired output voltage level.

Packaging/Quantity: The MAX1968EUI+ is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: Adjustable from 0.6V to VIN
  • Maximum Output Current: 500mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA
  • PSRR: 70dB at 1kHz
  • Thermal Shutdown Temperature: 160°C

Pin Configuration

The MAX1968EUI+ has a total of 28 pins. The pin configuration is as follows:

  1. VOUT
  2. GND
  3. FB
  4. EN
  5. SS
  6. VCC
  7. GND
  8. GND
  9. GND
  10. GND
  11. GND
  12. GND
  13. GND
  14. GND
  15. GND
  16. GND
  17. GND
  18. GND
  19. GND
  20. GND
  21. GND
  22. GND
  23. GND
  24. GND
  25. GND
  26. GND
  27. GND
  28. VIN

Functional Features

  • Adjustable Output Voltage: The MAX1968EUI+ allows the user to adjust the output voltage within a specified range, providing flexibility for different applications.
  • Low Dropout Voltage: With a dropout voltage as low as 120mV at 100mA, this IC minimizes power loss and improves efficiency.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, which prevents damage due to excessive temperature.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various power sources. - Adjustable output voltage provides versatility for different devices. - Low dropout voltage reduces power dissipation and improves efficiency. - Thermal shutdown protection ensures safe operation under high temperature conditions.

Disadvantages: - Maximum output current of 500mA may not be sufficient for high-power applications. - Limited pin configuration options may restrict certain circuit designs.

Working Principles

The MAX1968EUI+ operates as a linear voltage regulator. It regulates the output voltage by comparing it to a reference voltage and adjusting the internal pass transistor accordingly. The feedback pin (FB) is used to set the desired output voltage, while the enable pin (EN) controls the device's on/off state. The soft-start pin (SS) allows for gradual ramp-up of the output voltage during power-up, reducing inrush current.

Detailed Application Field Plans

The MAX1968EUI+ is commonly used in various electronic devices and applications, including: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. LM317: A popular adjustable linear voltage regulator with a wide input voltage range and adjustable output voltage.
  2. LT1084: A high-current, low-dropout linear voltage regulator suitable for demanding applications.
  3. TPS7A4700: An ultra-low-noise, high-PSRR linear voltage regulator designed for sensitive audio and RF applications.

These alternative models offer similar functionality to the MAX1968EUI+ and can be considered as alternatives based on specific requirements and design considerations.

In conclusion, the MAX1968EUI+ is an integrated circuit voltage regulator that provides stable and regulated power supply for various electronic devices. Its adjustable output voltage, low dropout voltage, and thermal shutdown protection make it suitable for a wide range of applications. However, designers should consider alternative models based on specific needs and constraints.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MAX1968EUI+ sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MAX1968EUI+ in technical solutions:

  1. Q: What is the MAX1968EUI+? A: The MAX1968EUI+ is a high-efficiency, step-down DC-DC converter IC designed for various applications.

  2. Q: What is the input voltage range of the MAX1968EUI+? A: The input voltage range of the MAX1968EUI+ is typically between 2.7V and 5.5V.

  3. Q: What is the output voltage range of the MAX1968EUI+? A: The output voltage range of the MAX1968EUI+ can be adjusted from 0.6V to VIN.

  4. Q: What is the maximum output current of the MAX1968EUI+? A: The maximum output current of the MAX1968EUI+ is typically around 1A.

  5. Q: Does the MAX1968EUI+ require an external compensation network? A: No, the MAX1968EUI+ has an internal compensation network, eliminating the need for external components.

  6. Q: Can the MAX1968EUI+ operate in a wide temperature range? A: Yes, the MAX1968EUI+ is designed to operate in a temperature range of -40°C to +85°C.

  7. Q: Is the MAX1968EUI+ suitable for battery-powered applications? A: Yes, the low quiescent current and high efficiency of the MAX1968EUI+ make it ideal for battery-powered devices.

  8. Q: Does the MAX1968EUI+ have built-in protection features? A: Yes, the MAX1968EUI+ includes features like overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: Can the MAX1968EUI+ be used in automotive applications? A: Yes, the MAX1968EUI+ is qualified for automotive applications and meets the necessary standards.

  10. Q: Are there any evaluation boards or reference designs available for the MAX1968EUI+? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help with the implementation of the MAX1968EUI+ in various applications.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.