Tingnan ang mga detalye para sa mga detalye ng produkto.
MAX6719UTSGD3+T
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Monitor
- Characteristics: Low-power, precision voltage monitoring
- Package: SOT23-6
- Essence: Monitors the voltage level of a power supply and provides an output signal when it falls below or exceeds a certain threshold.
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Supply Voltage Range: 1.6V to 5.5V
- Threshold Voltage Options: 1.8V, 2.5V, 3.0V, 3.3V, 4.63V
- Quiescent Current: 1µA (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MAX6719UTSGD3+T has six pins arranged as follows: 1. GND: Ground connection 2. IN: Input voltage to be monitored 3. SET: Output pin for setting the threshold voltage 4. RESET: Active-low reset output 5. VCC: Power supply input 6. NC: No connection
Functional Features
- Precision Monitoring: The MAX6719UTSGD3+T accurately monitors the input voltage with a low tolerance.
- Adjustable Threshold: The threshold voltage can be set using an external resistor divider connected to the SET pin.
- Reset Output: The active-low RESET pin provides an output signal when the monitored voltage falls below the threshold.
- Low Power Consumption: With a quiescent current of only 1µA, the device minimizes power consumption.
Advantages and Disadvantages
Advantages: - High accuracy in voltage monitoring - Wide supply voltage range - Adjustable threshold voltage - Low power consumption
Disadvantages: - Limited number of threshold voltage options - No built-in hysteresis
Working Principles
The MAX6719UTSGD3+T operates by comparing the input voltage with a reference voltage set by the external resistor divider connected to the SET pin. When the input voltage falls below the threshold, the active-low RESET pin is asserted, indicating a power failure or an out-of-range condition. The device continuously monitors the input voltage and provides a reliable output signal.
Detailed Application Field Plans
The MAX6719UTSGD3+T finds applications in various fields, including: 1. Battery-Powered Systems: It can be used to monitor the battery voltage and trigger actions when it reaches critical levels. 2. Power Supply Units: The IC ensures that the output voltage remains within the desired range, preventing damage to connected devices. 3. Industrial Control Systems: It provides voltage monitoring capabilities in control panels, ensuring stable operation and preventing system failures.
Detailed and Complete Alternative Models
- MAX6718UTZGD3+T: Similar to MAX6719UTSGD3+T but with different threshold voltage options.
- MAX6717AUTYDD3+T: Voltage monitor with adjustable threshold and push-pull output.
- MAX6716AUTSYD3+T: Low-power voltage monitor with fixed threshold voltage options.
These alternative models offer similar functionality and can be considered based on specific requirements.
Word count: 329 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MAX6719UTSGD3+T sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of MAX6719UTSGD3+T in technical solutions:
Q: What is the MAX6719UTSGD3+T? A: The MAX6719UTSGD3+T is a voltage detector IC (integrated circuit) manufactured by Maxim Integrated. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of MAX6719UTSGD3+T? A: The operating voltage range of MAX6719UTSGD3+T is typically between 1.6V and 5.5V.
Q: How does MAX6719UTSGD3+T detect undervoltage conditions? A: MAX6719UTSGD3+T compares the input voltage with a fixed internal reference voltage. When the input voltage drops below the reference voltage, it triggers an output signal indicating an undervoltage condition.
Q: What is the output type of MAX6719UTSGD3+T? A: MAX6719UTSGD3+T has an open-drain output, which means it can be connected to other devices or circuits to indicate an undervoltage condition.
Q: Can MAX6719UTSGD3+T be used for overvoltage detection as well? A: No, MAX6719UTSGD3+T is specifically designed for undervoltage detection only. For overvoltage detection, a different voltage detector IC should be used.
Q: What is the typical quiescent current consumption of MAX6719UTSGD3+T? A: The typical quiescent current consumption of MAX6719UTSGD3+T is very low, usually around 1.5µA.
Q: Can MAX6719UTSGD3+T be used in battery-powered applications? A: Yes, MAX6719UTSGD3+T's low quiescent current makes it suitable for battery-powered applications where power efficiency is crucial.
Q: What is the typical response time of MAX6719UTSGD3+T? A: The typical response time of MAX6719UTSGD3+T is very fast, typically around 20µs.
Q: Can MAX6719UTSGD3+T tolerate voltage transients or spikes? A: Yes, MAX6719UTSGD3+T has built-in hysteresis to prevent false triggering due to voltage transients or spikes.
Q: How can I connect MAX6719UTSGD3+T in my circuit? A: MAX6719UTSGD3+T requires a power supply connection (VCC), ground connection (GND), and an input voltage connection (VIN). The output signal (OUT) should be connected to the desired circuitry for undervoltage indication.