Micro Commercial Co
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
15KP45CA-TP
Tingnan ang Detalye DataSheets

15KP45CA-TP Product Overview

Introduction

The 15KP45CA-TP belongs to the category of transient voltage suppressor diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and surges. The 15KP45CA-TP is specifically designed to provide robust protection against transient overvoltage conditions.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and surges
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Through-hole
  • Essence: Reliable protection for electronic circuits
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Voltage Rating: 45V
  • Peak Pulse Power: 15000W
  • Breakdown Voltage: 50.2V to 55.7V
  • Operating Temperature: -55°C to 175°C
  • Storage Temperature: -55°C to 175°C

Detailed Pin Configuration

The 15KP45CA-TP typically has a standard axial lead configuration with two leads for through-hole mounting. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Provides effective suppression of transient overvoltage events.
  • Fast Response Time: Rapidly clamps voltage spikes to protect downstream components.
  • High Surge Capability: Capable of handling large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Robust protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of reverse standoff voltage

Working Principles

The 15KP45CA-TP operates based on the principle of avalanche breakdown. When a voltage spike occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action effectively clamps the voltage to a safe level, protecting the connected components.

Detailed Application Field Plans

The 15KP45CA-TP is commonly used in various applications including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • 15KP43CA-TP: Similar specifications with slightly lower breakdown voltage
  • 15KP47CA-TP: Similar specifications with slightly higher breakdown voltage
  • 15KP48CA-TP: Similar specifications with higher breakdown voltage and power rating

In conclusion, the 15KP45CA-TP transient voltage suppressor diode offers reliable protection against transient overvoltage conditions, making it an essential component in various electronic circuits.

[Word Count: 413]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 15KP45CA-TP sa mga teknikal na solusyon

  1. What is the maximum reverse voltage of 15KP45CA-TP?

    • The maximum reverse voltage of 15KP45CA-TP is 45V.

  2. What is the peak pulse power dissipation of 15KP45CA-TP?

    • The peak pulse power dissipation of 15KP45CA-TP is 15000W for a 10/1000μs waveform.

  3. What are the typical applications of 15KP45CA-TP?

    • 15KP45CA-TP is commonly used in surge protection for sensitive electronics, such as in power supplies, industrial equipment, and telecommunications systems.

  4. What is the clamping voltage of 15KP45CA-TP?

    • The clamping voltage of 15KP45CA-TP is typically 77.4V at 100A.

  5. Is 15KP45CA-TP suitable for overvoltage protection in automotive applications?

    • Yes, 15KP45CA-TP can be used for overvoltage protection in automotive applications due to its high surge capability.

  6. What is the response time of 15KP45CA-TP to a transient surge?

    • The response time of 15KP45CA-TP is very fast, typically responding within nanoseconds to clamp the transient voltage.

  7. Can 15KP45CA-TP be used in conjunction with other surge protection devices?

    • Yes, 15KP45CA-TP can be used in combination with other surge protection devices to provide layered protection against transient events.

  8. What are the temperature considerations for 15KP45CA-TP in technical solutions?

    • 15KP45CA-TP has a wide operating temperature range, typically from -55°C to 175°C, making it suitable for various environments.

  9. Does 15KP45CA-TP require any special mounting or handling considerations?

    • 15KP45CA-TP should be mounted on a heat sink or thermal pad to ensure proper heat dissipation during surge events.

  10. Are there any reliability tests or certifications available for 15KP45CA-TP?

    • Yes, 15KP45CA-TP may have undergone reliability testing and could be certified to industry standards such as AEC-Q101 for automotive applications.