Microchip Technology
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
AT17C010A-10PI
Tingnan ang Detalye DataSheets

AT17C010A-10PI

Product Overview

Category

AT17C010A-10PI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High storage capacity: The AT17C010A-10PI has a storage capacity of 1 megabit (128 kilobytes).
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.
  • Fast access time: The device offers quick access to stored data.

Package

The AT17C010A-10PI is available in a plastic DIP (Dual In-line Package) with 32 pins.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT17C010A-10PI is typically packaged in tubes or trays. The quantity per package varies depending on the manufacturer's specifications.

Specifications

  • Storage Capacity: 1 megabit (128 kilobytes)
  • Operating Voltage: 2.7V - 5.5V
  • Access Time: 100 nanoseconds
  • Data Retention: Up to 10 years
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT17C010A-10PI has a total of 32 pins. The pin configuration is as follows:

  1. Chip Enable (CE)
  2. Output Enable (OE)
  3. Write Enable (WE)
  4. Address Inputs (A0-A16)
  5. Data Inputs/Outputs (DQ0-DQ7)
  6. Supply Voltage (VCC)
  7. Ground (GND)

Functional Features

  • Random access: The AT17C010A-10PI allows for random access to any location within its storage capacity.
  • High reliability: The non-volatile nature of the device ensures that data is retained even in the event of power loss or system failure.
  • Easy integration: The device can be easily integrated into various electronic systems due to its standard pin configuration and compatibility with common interface protocols.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data integrity.
  • High storage capacity for a wide range of applications.
  • Low power consumption extends battery life.
  • Fast access time for efficient data retrieval.

Disadvantages

  • Limited storage capacity compared to other modern memory technologies.
  • Relatively slower access time compared to volatile memory devices.
  • Susceptible to physical damage if mishandled.

Working Principles

The AT17C010A-10PI utilizes EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It stores data by trapping electric charges within floating gate transistors. These charges can be selectively removed or programmed using electrical signals, allowing for data modification and retention.

Detailed Application Field Plans

The AT17C010A-10PI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models to the AT17C010A-10PI include: - AT28C010-12PC - 27C010-15JL - M27C1001-10F1

These models offer similar functionality and specifications, providing alternatives for different design requirements.

Word count: 430 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng AT17C010A-10PI sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of AT17C010A-10PI in technical solutions:

  1. Q: What is the AT17C010A-10PI? A: The AT17C010A-10PI is a 1 Megabit (128K x 8) CMOS EPROM, which stands for Electrically Programmable Read-Only Memory.

  2. Q: What are the typical applications of AT17C010A-10PI? A: The AT17C010A-10PI is commonly used in various technical solutions such as microcontroller programming, firmware storage, configuration data storage, and code storage for embedded systems.

  3. Q: How does the AT17C010A-10PI work? A: The AT17C010A-10PI can be electrically programmed using specific voltage levels and timing sequences. Once programmed, the stored data can be read by the system.

  4. Q: What is the operating voltage range for AT17C010A-10PI? A: The AT17C010A-10PI operates within a voltage range of 4.5V to 5.5V.

  5. Q: Can the AT17C010A-10PI be reprogrammed? A: No, the AT17C010A-10PI is a one-time programmable EPROM and cannot be reprogrammed once it has been programmed.

  6. Q: What is the access time of the AT17C010A-10PI? A: The AT17C010A-10PI has an access time of 100 nanoseconds (ns), meaning it takes approximately 100 ns to retrieve data from the memory.

  7. Q: Does the AT17C010A-10PI require an external power supply? A: Yes, the AT17C010A-10PI requires an external power supply within the specified voltage range for proper operation.

  8. Q: Can the AT17C010A-10PI withstand high temperatures? A: The AT17C010A-10PI has a maximum operating temperature of 70 degrees Celsius, so it should be used within this temperature range to ensure reliable performance.

  9. Q: What is the package type of the AT17C010A-10PI? A: The AT17C010A-10PI comes in a 32-lead PDIP (Plastic Dual Inline Package) with a pin pitch of 0.6 inches.

  10. Q: Are there any special precautions to consider when handling the AT17C010A-10PI? A: It is important to handle the AT17C010A-10PI with proper electrostatic discharge (ESD) precautions to prevent damage to the device. Additionally, care should be taken to avoid exposing the device to excessive heat or moisture.