Micron Technology Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
N25Q032A11ESE40G
Tingnan ang Detalye DataSheets

N25Q032A11ESE40G

Basic Information Overview

  • Category: Non-volatile Memory
  • Use: Data storage and retrieval
  • Characteristics: High-speed, low-power, reliable
  • Package: 8-pin SOIC
  • Essence: Flash memory chip
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Memory Capacity: 32 Megabits (4 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Program Time: 35ms/1.5ms (typical)
  • Data Retention: 20 years (typical)

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • High-speed data transfer with SPI interface
  • Low power consumption for extended battery life
  • Reliable data retention and endurance
  • Sector erase and byte program operations
  • Software and hardware write protection options
  • Deep power-down mode for reduced standby power

Advantages

  • Fast read and write speeds enhance overall system performance
  • Low power consumption makes it suitable for portable devices
  • High reliability ensures data integrity and longevity
  • Flexible write protection options provide enhanced security
  • Compact package size allows for easy integration into various designs

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Relatively higher cost per unit of storage compared to traditional hard drives
  • Susceptible to data loss in case of power failure during write operations

Working Principles

The N25Q032A11ESE40G is based on the NOR flash memory technology. It utilizes a floating gate transistor structure to store data. The memory cells are organized into sectors, which can be individually erased and programmed. The SPI interface allows for high-speed communication between the chip and the host device.

Detailed Application Field Plans

  • Embedded systems: Used for firmware storage in microcontrollers and system-on-chips.
  • Networking devices: Used for storing configuration data and firmware updates.
  • Consumer electronics: Used in digital cameras, set-top boxes, and gaming consoles for data storage.
  • Automotive applications: Used for storing maps, firmware, and other critical data in navigation systems.
  • Industrial equipment: Used for data logging, configuration storage, and firmware updates.

Detailed and Complete Alternative Models

  1. N25Q064A13ESF40F - 64 Megabit (8 Megabyte) capacity, same package and interface.
  2. N25Q128A11EF840E - 128 Megabit (16 Megabyte) capacity, same package and interface.
  3. N25Q256A13EF840E - 256 Megabit (32 Megabyte) capacity, same package and interface.
  4. N25Q512A13EF840E - 512 Megabit (64 Megabyte) capacity, same package and interface.

(Note: The above alternative models are from the same product family and have similar specifications.)

Word count: 439 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng N25Q032A11ESE40G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of N25Q032A11ESE40G in technical solutions:

  1. Question: What is the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G is a flash memory chip manufactured by Micron Technology. It has a capacity of 32 megabits (4 megabytes) and is commonly used in various electronic devices.

  2. Question: What is the interface used by the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G uses a Serial Peripheral Interface (SPI) for communication with the host device.

  3. Question: What are some typical applications of the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G is often used in applications such as routers, set-top boxes, gaming consoles, automotive systems, and other embedded systems that require non-volatile storage.

  4. Question: What is the operating voltage range of the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G operates at a voltage range of 2.7V to 3.6V.

  5. Question: What is the maximum data transfer rate supported by the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G supports a maximum data transfer rate of up to 108 MHz.

  6. Question: Does the N25Q032A11ESE40G support hardware or software write protection?
    Answer: Yes, the N25Q032A11ESE40G supports both hardware and software write protection features to prevent accidental modification of data.

  7. Question: Can the N25Q032A11ESE40G be operated in a wide temperature range?
    Answer: Yes, the N25Q032A11ESE40G is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  8. Question: Does the N25Q032A11ESE40G support sector erase and block erase operations?
    Answer: Yes, the N25Q032A11ESE40G supports both sector erase (4KB) and block erase (64KB) operations for efficient memory management.

  9. Question: What is the typical endurance of the N25Q032A11ESE40G?
    Answer: The N25Q032A11ESE40G has a typical endurance of 100,000 program/erase cycles per sector.

  10. Question: Is the N25Q032A11ESE40G RoHS compliant?
    Answer: Yes, the N25Q032A11ESE40G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on specific product specifications and revisions.