Microsemi Corporation
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
JANTX1N4963C
Tingnan ang Detalye DataSheets

JANTX1N4963C

Product Overview

Category

The JANTX1N4963C belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification and voltage regulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed

Package

The JANTX1N4963C is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 100V
  • Maximum Forward Current: 1A
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4963C has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Fast response time
  • Low power dissipation

Advantages

  • High reliability and durability
  • Low forward voltage drop reduces power loss
  • Fast switching speed allows for rapid circuit response

Disadvantages

  • Limited maximum reverse voltage compared to some other diode models
  • Relatively low maximum forward current rating

Working Principles

The JANTX1N4963C operates based on the principle of creating a one-way flow of current when forward-biased, allowing it to efficiently convert AC to DC.

Detailed Application Field Plans

The JANTX1N4963C is widely used in: - Power supply units - Voltage regulators - Rectifier circuits - Electronic equipment requiring efficient AC to DC conversion

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4963C include: - 1N4001 - 1N4148 - 1N5819 - 1N5408

In conclusion, the JANTX1N4963C semiconductor diode is a reliable and efficient component used in various electronic applications for rectification and voltage regulation. Its high reliability, low forward voltage drop, and fast switching speed make it a popular choice for designers and engineers in the electronics industry.

Word Count: 346

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng JANTX1N4963C sa mga teknikal na solusyon

  1. What is the JANTX1N4963C diode used for?

    • The JANTX1N4963C diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4963C diode?

    • The JANTX1N4963C diode is a 400V, 10A silicon rectifier with fast recovery times and low forward voltage drop.

  3. How does the JANTX1N4963C diode compare to other similar diodes?

    • The JANTX1N4963C diode offers high reliability and performance under harsh environmental conditions, making it suitable for military and aerospace applications.

  4. Can the JANTX1N4963C diode handle high temperature environments?

    • Yes, the JANTX1N4963C diode is designed to operate reliably at high temperatures, making it suitable for demanding technical solutions.

  5. What are the typical applications of the JANTX1N4963C diode?

    • The JANTX1N4963C diode is commonly used in power supplies, inverters, motor drives, and other industrial and military electronic systems.

  6. Does the JANTX1N4963C diode have any special packaging or mounting requirements?

    • The JANTX1N4963C diode is available in various package types, including through-hole and surface mount, to accommodate different mounting and assembly needs.

  7. What are the potential failure modes of the JANTX1N4963C diode?

    • The JANTX1N4963C diode can fail due to overvoltage, overcurrent, or excessive temperature, so proper protection and thermal management should be considered in technical solutions.

  8. Is the JANTX1N4963C diode compliant with industry standards and regulations?

    • Yes, the JANTX1N4963C diode is compliant with MIL-PRF-19500/291, ensuring its quality and reliability for military and aerospace applications.

  9. Are there any recommended design considerations when using the JANTX1N4963C diode in technical solutions?

    • It's important to consider proper heat sinking, current derating, and transient protection to maximize the performance and reliability of the JANTX1N4963C diode.

  10. Where can I find detailed technical information and application notes for the JANTX1N4963C diode?

    • Detailed technical information and application notes for the JANTX1N4963C diode can be found in the manufacturer's datasheets, application guides, and technical support resources.