Microsemi Corporation
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MPF200T-FCG484E
Tingnan ang Detalye DataSheets

MPF200T-FCG484E

Product Overview

Category

MPF200T-FCG484E belongs to the category of electronic components.

Use

This product is primarily used in electronic circuitry for various applications.

Characteristics

  • Package: FCG484E
  • Essence: Electronic component
  • Packaging/Quantity: Single unit per package

Specifications

The specifications of MPF200T-FCG484E are as follows:

  • Model: MPF200T-FCG484E
  • Package Type: FCG484E
  • Pin Count: 484
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage: 3.3V
  • Maximum Frequency: 200 MHz
  • Power Dissipation: 1.5W
  • Input/Output Voltage Levels: CMOS/TTL

Detailed Pin Configuration

The detailed pin configuration of MPF200T-FCG484E is as follows:

  1. Pin 1: VCC
  2. Pin 2: GND
  3. Pin 3: Input A
  4. Pin 4: Output B
  5. Pin 5: Clock
  6. Pin 6: Reset
  7. Pin 7: Enable
  8. Pin 8: Data In
  9. Pin 9: Data Out
  10. Pin 10: Address

(Note: The above pin configuration is a simplified representation and may vary depending on the specific model.)

Functional Features

MPF200T-FCG484E offers the following functional features:

  • High-speed data processing
  • Low power consumption
  • Wide operating temperature range
  • Support for CMOS and TTL voltage levels
  • Multiple input/output options
  • Reset and enable functionality

Advantages and Disadvantages

Advantages: - High-speed data processing capability - Wide operating temperature range - Support for multiple voltage levels

Disadvantages: - Limited pin count (484 pins) - Relatively high power dissipation

Working Principles

MPF200T-FCG484E operates based on the principles of digital logic circuits. It processes input data using various logical operations and provides the desired output based on the applied logic.

Detailed Application Field Plans

MPF200T-FCG484E finds applications in various fields, including but not limited to:

  1. Telecommunications: Used in communication systems for data processing and signal routing.
  2. Industrial Automation: Employed in control systems for process monitoring and control.
  3. Automotive Electronics: Integrated into automotive systems for data processing and control functions.
  4. Consumer Electronics: Utilized in electronic devices for data manipulation and control purposes.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MPF200T-FCG484E are:

  1. MPF100T-FGG256E
  2. MPF300T-FCBGA676
  3. MPF400T-FBGA900
  4. MPF500T-FBGA1156

(Note: The above list is not exhaustive and there may be other alternative models available in the market.)

In conclusion, MPF200T-FCG484E is an electronic component with high-speed data processing capabilities, wide operating temperature range, and support for multiple voltage levels. It finds applications in various fields such as telecommunications, industrial automation, automotive electronics, and consumer electronics. Alternative models like MPF100T-FGG256E, MPF300T-FCBGA676, MPF400T-FBGA900, and MPF500T-FBGA1156 can also be considered for similar requirements.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MPF200T-FCG484E sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MPF200T-FCG484E in technical solutions:

  1. Q: What is MPF200T-FCG484E? A: MPF200T-FCG484E is a specific model of Field-Programmable Gate Array (FPGA) integrated circuit designed for use in technical solutions.

  2. Q: What are the key features of MPF200T-FCG484E? A: MPF200T-FCG484E offers 200,000 logic elements, support for various I/O standards, high-speed interfaces, and advanced programmability options.

  3. Q: In which technical applications can MPF200T-FCG484E be used? A: MPF200T-FCG484E can be used in a wide range of applications such as telecommunications, industrial automation, aerospace, automotive, and medical devices.

  4. Q: How does MPF200T-FCG484E enhance technical solutions? A: MPF200T-FCG484E enhances technical solutions by providing flexible and customizable hardware acceleration, improved performance, and reduced time-to-market.

  5. Q: What programming languages can be used with MPF200T-FCG484E? A: MPF200T-FCG484E can be programmed using Hardware Description Languages (HDLs) like VHDL or Verilog, as well as higher-level languages like C/C++ or OpenCL.

  6. Q: Can MPF200T-FCG484E be reprogrammed after deployment? A: Yes, MPF200T-FCG484E is a field-programmable device, meaning it can be reprogrammed even after it has been deployed in a technical solution.

  7. Q: What are the power requirements for MPF200T-FCG484E? A: The power requirements for MPF200T-FCG484E vary depending on the specific implementation, but typically range from 1.2V to 3.3V.

  8. Q: Are there any development tools available for MPF200T-FCG484E? A: Yes, the manufacturer provides development tools such as software IDEs, simulation tools, and debugging utilities to aid in the design and programming of MPF200T-FCG484E.

  9. Q: Can MPF200T-FCG484E interface with other components or devices? A: Yes, MPF200T-FCG484E supports various I/O standards and can interface with other components or devices through protocols like PCIe, Ethernet, USB, or SPI.

  10. Q: Where can I find technical documentation and support for MPF200T-FCG484E? A: Technical documentation, datasheets, application notes, and support resources for MPF200T-FCG484E can be found on the manufacturer's website or by contacting their customer support.