Monolithic Power Systems Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MP5087GG-P
Tingnan ang Detalye DataSheets

MP5087GG-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: SOP-8 (Small Outline Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 1A
  • Quiescent Current: 50µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP5087GG-P has a SOP-8 package with the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switch node
  6. PGND: Power ground
  7. NC: No connection
  8. VOUT: Output voltage

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency conversion minimizes power loss
  • Compact size enables space-saving designs
  • Low quiescent current reduces standby power consumption
  • Built-in protection features such as overcurrent and thermal shutdown

Advantages and Disadvantages

Advantages: - High efficiency operation - Wide input voltage range - Compact size - Built-in protection features

Disadvantages: - Limited maximum output current (1A)

Working Principles

The MP5087GG-P is a voltage regulator IC that converts an input voltage within the range of 2.5V to 6V into a regulated output voltage between 0.6V and the input voltage. It utilizes a switching frequency of 1.2MHz to efficiently step down the input voltage and maintain a stable output voltage. The IC incorporates various protection features to ensure safe operation and prevent damage to connected devices.

Detailed Application Field Plans

The MP5087GG-P is commonly used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the MP5087GG-P are: - MP5086GG-P: Similar specifications, lower maximum output current (500mA) - MP5088GG-P: Similar specifications, higher maximum output current (1.5A) - MP5089GG-P: Similar specifications, adjustable output voltage range

These alternative models provide flexibility in choosing the most suitable voltage regulator for specific application requirements.

Word count: 322 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MP5087GG-P sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MP5087GG-P in technical solutions:

  1. Q: What is MP5087GG-P? A: MP5087GG-P is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.

  2. Q: What is the purpose of MP5087GG-P? A: The purpose of MP5087GG-P is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: What are the key features of MP5087GG-P? A: The key features of MP5087GG-P may include high efficiency, low power consumption, small form factor, wide input voltage range, and various protection mechanisms.

  4. Q: How can MP5087GG-P be integrated into a technical solution? A: MP5087GG-P can be integrated by following the manufacturer's datasheet or application notes, which provide guidelines for its proper usage and connections.

  5. Q: What is the recommended operating voltage range for MP5087GG-P? A: The recommended operating voltage range for MP5087GG-P is typically specified in the datasheet and may vary depending on the specific application requirements.

  6. Q: Can MP5087GG-P handle high currents? A: Yes, MP5087GG-P is designed to handle certain current levels, which are also specified in the datasheet. It is important to ensure that the component is not operated beyond its maximum current rating.

  7. Q: Does MP5087GG-P require any external components for operation? A: MP5087GG-P may require additional external components, such as capacitors or resistors, to achieve optimal performance and stability. These requirements are usually mentioned in the datasheet or application notes.

  8. Q: Is MP5087GG-P suitable for battery-powered applications? A: Yes, MP5087GG-P can be suitable for battery-powered applications as it may offer features like low quiescent current and high efficiency, which help conserve battery life.

  9. Q: Can MP5087GG-P operate in extreme temperature conditions? A: The operating temperature range of MP5087GG-P is specified in the datasheet. It is important to ensure that the component is not exposed to temperatures beyond its specified limits.

  10. Q: Where can I find more information about MP5087GG-P? A: More detailed information about MP5087GG-P can be found in the manufacturer's datasheet, which typically includes electrical characteristics, application examples, and recommended usage guidelines.

Please note that the specific details and answers may vary depending on the actual specifications and documentation provided by the manufacturer for MP5087GG-P.