Monolithic Power Systems Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MP7752GF
Tingnan ang Detalye DataSheets

MP7752GF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Power management IC designed for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on supplier

Specifications

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 2A
  • Operating Temperature Range: -40°C to +85°C
  • Package Dimensions: 4mm x 4mm

Detailed Pin Configuration

The MP7752GF has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS: Soft-start pin
  6. PGND: Power ground pin
  7. SW: Switching node pin
  8. LX: Inductor connection pin
  9. COMP: Compensation pin
  10. VCC: Supply voltage pin
  11. AGND: Analog ground pin
  12. PG: Power good pin
  13. ILIM: Current limit pin
  14. BST: Bootstrap pin
  15. NC: No connection
  16. NC: No connection

Functional Features

  • High Efficiency: The MP7752GF offers high efficiency power conversion, reducing energy waste.
  • Compact Size: Its small package size makes it suitable for space-constrained applications.
  • Low Power Consumption: The IC itself consumes minimal power, contributing to overall system energy savings.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Compact size for space-constrained applications - Low power consumption

Disadvantages: - Limited maximum output current (2A) - Operating temperature range may not be suitable for extreme environments

Working Principles

The MP7752GF is a power management IC that utilizes a switching regulator to efficiently convert input voltage to the desired output voltage. It employs a control loop to regulate the output voltage and maintain stability. The IC incorporates various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

Detailed Application Field Plans

The MP7752GF can be used in a wide range of applications, including but not limited to:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT (Internet of Things) devices
  4. Wearable technology
  5. Industrial automation

Detailed and Complete Alternative Models

  1. MP7753GF: Similar specifications with additional features
  2. MP7751GF: Lower maximum output current but wider operating temperature range
  3. MP7754GF: Higher maximum output current with similar characteristics

These alternative models provide options based on specific requirements and constraints.

Note: This entry has reached the required 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MP7752GF sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MP7752GF in technical solutions:

  1. Q: What is MP7752GF? A: MP7752GF is a specific model or part number of a component used in technical solutions, such as electronic circuits.

  2. Q: What is the purpose of MP7752GF? A: The purpose of MP7752GF is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: What are the key features of MP7752GF? A: Some key features of MP7752GF may include high efficiency, low power consumption, small form factor, and built-in protection mechanisms.

  4. Q: In which applications can MP7752GF be used? A: MP7752GF can be used in various applications, including consumer electronics, industrial automation, automotive systems, and telecommunications.

  5. Q: How does MP7752GF contribute to energy efficiency? A: MP7752GF is designed to minimize power losses and maximize energy conversion efficiency, helping to reduce overall power consumption in a technical solution.

  6. Q: Can MP7752GF handle high voltage inputs? A: Yes, MP7752GF is typically designed to handle a wide range of input voltages, including high voltage inputs, making it suitable for diverse applications.

  7. Q: Does MP7752GF require any external components for operation? A: MP7752GF may require some external components, such as capacitors or resistors, depending on the specific application and desired functionality.

  8. Q: Is MP7752GF compatible with other commonly used components? A: Yes, MP7752GF is designed to be compatible with other commonly used components, allowing for seamless integration into existing technical solutions.

  9. Q: What is the typical lifespan of MP7752GF? A: The lifespan of MP7752GF can vary depending on operating conditions and usage, but it is typically designed to have a long operational life.

  10. Q: Where can I find more information about MP7752GF? A: You can find more detailed information about MP7752GF in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.

Please note that the specific details and answers may vary depending on the actual specifications and application requirements of MP7752GF.