Nexperia USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
74AXP2T3407DCH
Tingnan ang Detalye DataSheets

Encyclopedia Entry: 74AXP2T3407DCH

Product Overview

Category

The 74AXP2T3407DCH belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal switching and level shifting applications.

Characteristics

  • The 74AXP2T3407DCH is a dual supply, dual control, low-voltage, high-bandwidth bus switch.
  • It operates at a voltage range of 1.65V to 3.6V, making it suitable for low-power applications.
  • This IC offers bidirectional functionality, allowing signals to be transmitted in both directions.
  • It has a high bandwidth, enabling fast data transmission.

Package

The 74AXP2T3407DCH is available in a small form factor package, such as a 10-pin VSSOP (Very Small Outline Package) or similar.

Essence

The essence of the 74AXP2T3407DCH lies in its ability to provide efficient signal switching and level shifting capabilities in low-power electronic devices.

Packaging/Quantity

Typically, the 74AXP2T3407DCH is sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Logic Voltage Levels: 1.8V, 2.5V, 3.3V
  • On-State Resistance: 4Ω (maximum)
  • Bandwidth: Up to 500MHz
  • Input/Output Capacitance: 3pF (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74AXP2T3407DCH features a 10-pin package with the following pin configuration:

  1. Control Input 1 (A1)
  2. Control Input 2 (A2)
  3. Ground (GND)
  4. Switch Output 1 (Y1)
  5. Switch Output 2 (Y2)
  6. Supply Voltage (VCC)
  7. Ground (GND)
  8. Switch Input/Output 1 (X1)
  9. Switch Input/Output 2 (X2)
  10. Control Voltage (VC)

Functional Features

  • Bidirectional signal switching: The IC allows signals to be transmitted in both directions, facilitating versatile applications.
  • Low-voltage operation: With a wide supply voltage range of 1.65V to 3.6V, it is suitable for low-power electronic devices.
  • High bandwidth: The 74AXP2T3407DCH offers a high bandwidth of up to 500MHz, enabling fast data transmission.
  • Dual control inputs: It features two control inputs (A1 and A2) for flexible control of the switch.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Compact size
  • Wide operating temperature range
  • High-speed data transmission

Disadvantages

  • Limited number of switch channels
  • May require additional components for specific applications

Working Principles

The 74AXP2T3407DCH operates based on CMOS (Complementary Metal-Oxide-Semiconductor) technology. It utilizes MOSFET transistors to control the flow of signals between its input/output pins. The control inputs (A1 and A2) determine the state of the switch, allowing signals to pass through or be blocked.

Detailed Application Field Plans

The 74AXP2T3407DCH finds application in various electronic systems, including but not limited to: - Mobile devices - Portable consumer electronics - Communication equipment - Industrial automation - Medical devices

Detailed and Complete Alternative Models

  • 74AXP2T3407DCG
  • 74AXP2T3407DCX
  • 74AXP2T3407DCT
  • 74AXP2T3407DCR

These alternative models offer similar functionality and characteristics to the 74AXP2T3407DCH, providing options for different package types or pin configurations.

In conclusion, the 74AXP2T3407DCH is a versatile IC used for signal switching and level shifting in low-power electronic devices. Its compact size, low power consumption, and high bandwidth make it suitable for various applications. However, it has a limited number of switch channels and may require additional components for specific use cases.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 74AXP2T3407DCH sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of 74AXP2T3407DCH in technical solutions:

  1. Q: What is the 74AXP2T3407DCH? A: The 74AXP2T3407DCH is a dual supply, dual SPDT (Single Pole Double Throw) analog switch.

  2. Q: What are the typical applications of the 74AXP2T3407DCH? A: The 74AXP2T3407DCH is commonly used in audio and video signal routing, data acquisition systems, communication systems, and other applications requiring analog signal switching.

  3. Q: What is the operating voltage range for the 74AXP2T3407DCH? A: The 74AXP2T3407DCH operates with a supply voltage range of +1.65V to +5.5V.

  4. Q: How many channels does the 74AXP2T3407DCH have? A: The 74AXP2T3407DCH has two independent channels, each with a single pole double throw configuration.

  5. Q: What is the on-resistance of the 74AXP2T3407DCH? A: The on-resistance of the 74AXP2T3407DCH is typically around 6 ohms.

  6. Q: Can the 74AXP2T3407DCH handle both analog and digital signals? A: Yes, the 74AXP2T3407DCH can handle both analog and digital signals, making it versatile for various applications.

  7. Q: Does the 74AXP2T3407DCH support bidirectional signal flow? A: Yes, the 74AXP2T3407DCH supports bidirectional signal flow, allowing signals to be switched in both directions.

  8. Q: What is the maximum current that the 74AXP2T3407DCH can handle? A: The 74AXP2T3407DCH can handle a maximum continuous current of 300mA per channel.

  9. Q: Is the 74AXP2T3407DCH suitable for low-power applications? A: Yes, the 74AXP2T3407DCH is designed for low-power applications and has a low power consumption.

  10. Q: Can I use multiple 74AXP2T3407DCH devices together in my circuit? A: Yes, you can use multiple 74AXP2T3407DCH devices together to expand the number of channels or create more complex switching configurations.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the 74AXP2T3407DCH.