NXP USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
KMPC8264AZUPIBB
Tingnan ang Detalye DataSheets

KMPC8264AZUPIBB

Product Overview

Category: Integrated Circuit (IC)

Use: The KMPC8264AZUPIBB is a high-performance microprocessor designed for various applications in the field of embedded systems. It offers advanced processing capabilities and is suitable for use in networking, telecommunications, industrial control, and other related fields.

Characteristics: - High-performance microprocessor - Suitable for embedded systems - Advanced processing capabilities - Ideal for networking, telecommunications, and industrial control applications

Package: The KMPC8264AZUPIBB is available in a compact and durable package that ensures reliable performance and easy integration into electronic devices.

Essence: This microprocessor is designed to provide efficient and reliable processing power for embedded systems, enabling them to perform complex tasks with ease.

Packaging/Quantity: The KMPC8264AZUPIBB is typically packaged individually and is available in various quantities depending on the requirements of the application.

Specifications

The KMPC8264AZUPIBB microprocessor features the following specifications:

  • Architecture: PowerPC
  • Clock Speed: Up to 400 MHz
  • Cache: 32 KB instruction cache, 32 KB data cache
  • Memory Management Unit (MMU): Yes
  • Floating-Point Unit (FPU): Yes
  • Bus Interface: PCI, Ethernet, USB, UART, I2C, SPI
  • Operating Voltage: 3.3V
  • Power Consumption: Varies based on usage
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The KMPC8264AZUPIBB microprocessor has a detailed pin configuration as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. CLK - Clock input
  4. RESET - Reset input
  5. ADDR[31:0] - Address bus
  6. DATA[31:0] - Data bus
  7. IRQ - Interrupt request input
  8. DMA - Direct Memory Access request input
  9. CS - Chip select input
  10. RD/WR - Read/Write control signal

(Note: This is a simplified representation of the pin configuration. The actual microprocessor may have additional pins and functionalities.)

Functional Features

The KMPC8264AZUPIBB microprocessor offers the following functional features:

  • High-performance processing capabilities
  • Support for various communication interfaces (PCI, Ethernet, USB, UART, I2C, SPI)
  • Integrated memory management unit for efficient memory access
  • Floating-point unit for enhanced mathematical calculations
  • Low power consumption for energy-efficient operation
  • Wide temperature range for reliable performance in harsh environments

Advantages and Disadvantages

Advantages: - High-performance processing capabilities enable efficient execution of complex tasks. - Support for various communication interfaces allows for easy integration into different systems. - Integrated memory management unit enhances memory access efficiency. - Floating-point unit enables accurate and fast mathematical calculations. - Low power consumption ensures energy-efficient operation. - Wide temperature range allows for reliable performance in extreme conditions.

Disadvantages: - Limited availability of alternative models may restrict flexibility in certain applications. - Higher cost compared to lower-end microprocessors with similar specifications.

Working Principles

The KMPC8264AZUPIBB microprocessor operates based on the PowerPC architecture. It executes instructions stored in its cache memory and performs various operations using its integrated arithmetic logic unit (ALU) and other functional units. The microprocessor communicates with external devices through its bus interface, enabling data transfer and control signals exchange.

Detailed Application Field Plans

The KMPC8264AZUPIBB microprocessor can be applied in various fields, including but not limited to:

  1. Networking equipment: Routers, switches, and gateways.
  2. Telecommunications systems: Voice over IP (VoIP) devices, base stations.
  3. Industrial control systems: Programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems.
  4. Embedded systems: Automotive electronics, medical devices, consumer electronics.

Detailed and Complete Alternative Models

  1. KMPC8260AZUPIBB
  2. KMPC8248AZUPIBB
  3. KMPC8272AZUPIBB
  4. KMPC8255AZUPIBB
  5. KMPC8237AZUPIBB

(Note: The above list is not exhaustive and there may be other alternative models available in the market.)

This concludes the encyclopedia entry for the KMPC8264AZUPIBB microprocessor.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng KMPC8264AZUPIBB sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of KMPC8264AZUPIBB in technical solutions:

  1. Q: What is KMPC8264AZUPIBB? A: KMPC8264AZUPIBB is a microprocessor manufactured by NXP Semiconductors, designed for embedded applications.

  2. Q: What are the key features of KMPC8264AZUPIBB? A: Some key features include a PowerPC core, clock speed up to 266 MHz, integrated memory controller, and multiple communication interfaces.

  3. Q: What are the typical applications of KMPC8264AZUPIBB? A: KMPC8264AZUPIBB is commonly used in networking equipment, industrial automation, telecommunications systems, and embedded computing devices.

  4. Q: Can KMPC8264AZUPIBB handle real-time processing requirements? A: Yes, KMPC8264AZUPIBB supports real-time processing with its high-performance PowerPC core and integrated peripherals.

  5. Q: What operating systems are compatible with KMPC8264AZUPIBB? A: KMPC8264AZUPIBB is compatible with various operating systems such as Linux, VxWorks, and QNX.

  6. Q: How much RAM can be supported by KMPC8264AZUPIBB? A: KMPC8264AZUPIBB supports up to 256 MB of SDRAM or DDR SDRAM.

  7. Q: What communication interfaces are available on KMPC8264AZUPIBB? A: KMPC8264AZUPIBB provides interfaces like Ethernet, UART, SPI, I2C, USB, and PCI.

  8. Q: Can KMPC8264AZUPIBB support multiple displays or graphics-intensive applications? A: No, KMPC8264AZUPIBB does not have built-in graphics capabilities. It is primarily designed for processing and communication tasks.

  9. Q: Is KMPC8264AZUPIBB suitable for low-power applications? A: No, KMPC8264AZUPIBB is not specifically optimized for low-power applications. It is more suitable for performance-oriented tasks.

  10. Q: Are development tools available for programming KMPC8264AZUPIBB? A: Yes, NXP provides a range of development tools, including compilers, debuggers, and software libraries, to facilitate programming and debugging of KMPC8264AZUPIBB-based systems.

Please note that the answers provided here are general and may vary depending on specific requirements and configurations.