NXP USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
MC912D60ACPVE8
Tingnan ang Detalye DataSheets

MC912D60ACPVE8

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, automotive applications
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: Plastic quad flat pack (PQFP)
  • Essence: A microcontroller designed for automotive applications with high performance and low power consumption.
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Architecture: 16-bit
  • CPU Speed: Up to 25 MHz
  • Flash Memory: 60 KB
  • RAM: 2 KB
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +125°C
  • Number of I/O Pins: 52
  • Communication Interfaces: CAN, SPI, SCI, I2C
  • Timers: 8-bit and 16-bit timers
  • Analog-to-Digital Converter (ADC): 10-bit resolution, 8 channels

Detailed Pin Configuration

The MC912D60ACPVE8 microcontroller has a total of 52 I/O pins. The pin configuration is as follows:

| Pin Number | Function | |------------|----------| | 1 | VDD | | 2 | RESET | | 3 | IRQ | | 4 | XTAL | | ... | ... | | 51 | PTB7 | | 52 | VSS |

Functional Features

  • High-performance CPU with efficient instruction set
  • Integrated peripherals such as timers, ADC, and communication interfaces
  • Low-power consumption modes for energy efficiency
  • Robust design suitable for automotive environments
  • Enhanced security features for data protection

Advantages and Disadvantages

Advantages

  • High-performance capabilities for demanding applications
  • Low power consumption for extended battery life
  • Integrated peripherals reduce external component count
  • Wide operating voltage range for flexibility
  • Suitable for automotive applications with robust design and enhanced security features

Disadvantages

  • Limited flash memory and RAM compared to some other microcontrollers in the market
  • Relatively higher cost compared to lower-end microcontrollers

Working Principles

The MC912D60ACPVE8 microcontroller operates based on a 16-bit architecture. It executes instructions stored in its flash memory, controlling various functions and peripherals. The CPU communicates with the integrated peripherals, such as timers, ADC, and communication interfaces, to perform specific tasks. The microcontroller can be programmed using a suitable development environment and programming language.

Detailed Application Field Plans

The MC912D60ACPVE8 microcontroller is widely used in automotive applications, including engine control units (ECUs), body control modules (BCMs), and instrument clusters. Its high-performance capabilities, low power consumption, and integrated peripherals make it suitable for demanding automotive systems. The microcontroller's robust design and enhanced security features ensure reliable operation in harsh automotive environments.

Detailed and Complete Alternative Models

  • MC9S12DG128B: Similar microcontroller with higher flash memory and RAM capacity
  • MC9S12DJ64: Similar microcontroller with lower flash memory and RAM capacity
  • MC9S12XEP100: Higher-end microcontroller with advanced features and larger memory capacity

Note: This entry provides an overview of the MC912D60ACPVE8 microcontroller. For more detailed information, please refer to the datasheet provided by the manufacturer.

Word Count: 431

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng MC912D60ACPVE8 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of MC912D60ACPVE8 in technical solutions:

  1. Q: What is MC912D60ACPVE8? A: MC912D60ACPVE8 is a microcontroller from the MC9S12D family, specifically designed for automotive and industrial applications.

  2. Q: What are the key features of MC912D60ACPVE8? A: Some key features of MC912D60ACPVE8 include an enhanced CPU core, on-chip memory, multiple communication interfaces, and analog-to-digital converters.

  3. Q: What are the typical applications of MC912D60ACPVE8? A: MC912D60ACPVE8 is commonly used in automotive systems such as engine control units (ECUs), body control modules (BCMs), and instrument clusters. It is also suitable for various industrial control applications.

  4. Q: How much flash memory does MC912D60ACPVE8 have? A: MC912D60ACPVE8 has 60 KB of flash memory for program storage.

  5. Q: Can I expand the memory of MC912D60ACPVE8? A: Yes, MC912D60ACPVE8 supports external memory expansion through its address and data buses.

  6. Q: What communication interfaces are available on MC912D60ACPVE8? A: MC912D60ACPVE8 provides several communication interfaces, including UART, SPI, CAN, and LIN.

  7. Q: Does MC912D60ACPVE8 have built-in analog-to-digital converters (ADCs)? A: Yes, MC912D60ACPVE8 has 8-channel 10-bit ADCs for analog signal acquisition.

  8. Q: What is the operating voltage range of MC912D60ACPVE8? A: MC912D60ACPVE8 operates within a voltage range of 2.7V to 5.5V.

  9. Q: Can I program MC912D60ACPVE8 using C or assembly language? A: Yes, MC912D60ACPVE8 can be programmed using both C and assembly language, depending on your preference and requirements.

  10. Q: Is MC912D60ACPVE8 suitable for real-time applications? A: Yes, MC912D60ACPVE8 is designed to handle real-time tasks with its enhanced CPU core and peripherals, making it suitable for real-time applications.

Please note that the answers provided here are general and may vary based on specific technical requirements and implementation details.