NXP USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
NX5P2924UKZ
Tingnan ang Detalye DataSheets

NX5P2924UKZ

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 50µA
  • Switching Frequency: 2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NX5P2924UKZ has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. SW: Switch pin
  6. PGND: Power ground pin
  7. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The NX5P2924UKZ utilizes advanced power management techniques to achieve high efficiency, minimizing power loss.
  • Low Power Consumption: With a quiescent current of only 50µA, the IC ensures low power consumption during standby or idle modes.
  • Wide Input Voltage Range: The IC can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.6V, providing flexibility for different system requirements.
  • Overcurrent Protection: The IC incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Wide input voltage range allows for versatile applications. - Adjustable output voltage provides flexibility. - Overcurrent protection ensures system safety.

Disadvantages: - Limited maximum output current of 1.5A may not be suitable for high-power applications. - Operating temperature range is limited to -40°C to +85°C, which may restrict usage in extreme environments.

Working Principles

The NX5P2924UKZ is a voltage regulator IC that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a buck converter configuration. The feedback mechanism adjusts the duty cycle of the switching transistor to maintain the desired output voltage. The IC also incorporates various protection features to ensure safe operation.

Detailed Application Field Plans

The NX5P2924UKZ finds applications in various fields, including but not limited to: - Portable electronic devices: Smartphones, tablets, portable media players - IoT devices: Wearables, smart home devices - Battery-powered systems: Wireless sensors, remote controls - Industrial equipment: Data loggers, measurement instruments

Detailed and Complete Alternative Models

  • NX5P2920UKZ: Similar specifications with a lower maximum output current of 1A.
  • NX5P2926UKZ: Similar specifications with a higher maximum output current of 2A.
  • NX5P2928UKZ: Similar specifications with a higher maximum output current of 3A.

(Note: The above alternative models are from the same product family and share similar characteristics and pin configurations.)

This entry provides an overview of the NX5P2924UKZ, a power management IC. It includes basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NX5P2924UKZ sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of NX5P2924UKZ in technical solutions:

  1. Q: What is the NX5P2924UKZ? A: The NX5P2924UKZ is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the NX5P2924UKZ? A: The key features of the NX5P2924UKZ include multiple voltage regulators, power sequencing, overvoltage/undervoltage protection, and thermal shutdown.

  3. Q: What applications can the NX5P2924UKZ be used in? A: The NX5P2924UKZ can be used in a wide range of applications such as smartphones, tablets, portable devices, and other battery-powered systems.

  4. Q: How many voltage regulators does the NX5P2924UKZ have? A: The NX5P2924UKZ has four voltage regulators, each capable of supplying different voltages to various components in the system.

  5. Q: Can the NX5P2924UKZ handle high current loads? A: Yes, the NX5P2924UKZ is designed to handle high current loads, making it suitable for power-hungry devices.

  6. Q: Does the NX5P2924UKZ support power sequencing? A: Yes, the NX5P2924UKZ supports power sequencing, ensuring that different power rails turn on/off in the correct order to prevent damage to the system.

  7. Q: What protections does the NX5P2924UKZ offer against overvoltage and undervoltage conditions? A: The NX5P2924UKZ provides overvoltage and undervoltage protection, which helps safeguard the system from voltage spikes or drops.

  8. Q: How does the thermal shutdown feature work in the NX5P2924UKZ? A: The thermal shutdown feature in the NX5P2924UKZ monitors the temperature of the IC and automatically shuts it down if it exceeds a certain threshold, preventing overheating.

  9. Q: Can the NX5P2924UKZ be used in automotive applications? A: Yes, the NX5P2924UKZ is suitable for automotive applications as it can operate within the required temperature range and has built-in protections.

  10. Q: Is there any evaluation board available for the NX5P2924UKZ? A: Yes, an evaluation board is available for the NX5P2924UKZ, which allows developers to test and evaluate its performance in their specific applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases.