NXP USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SC16IS750IPW,112
Tingnan ang Detalye DataSheets

SC16IS750IPW,112

Product Overview

Category: Integrated Circuit (IC)

Use: The SC16IS750IPW,112 is a versatile bridge IC that enables communication between a microcontroller and multiple serial devices. It provides a seamless interface for various applications requiring serial communication.

Characteristics: - Supports multiple serial protocols such as UART, SPI, and I2C - Low power consumption - Wide operating voltage range - Small form factor package - Robust and reliable performance

Package: The SC16IS750IPW,112 is available in a small outline package (SOIC) with 20 pins.

Essence: This IC acts as a bridge between a microcontroller and serial devices, allowing for easy and efficient communication.

Packaging/Quantity: The SC16IS750IPW,112 is typically sold in reels or tubes containing a specified quantity of ICs.

Specifications

  • Operating Voltage Range: 1.8V to 5.5V
  • Serial Protocols Supported: UART, SPI, I2C
  • Maximum Baud Rate: 5 Mbps
  • Number of Channels: 1
  • GPIO Pins: 8
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SC16IS750IPW,112 has a total of 20 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. SDA - I2C data line
  4. SCL - I2C clock line
  5. CSB - Chip select for SPI mode
  6. SDO - SPI data output
  7. SDI - SPI data input
  8. SCLK - SPI clock input
  9. RESET - Reset pin
  10. INT - Interrupt output
  11. GPIO0 - General-purpose I/O pin
  12. GPIO1 - General-purpose I/O pin
  13. GPIO2 - General-purpose I/O pin
  14. GPIO3 - General-purpose I/O pin
  15. GPIO4 - General-purpose I/O pin
  16. GPIO5 - General-purpose I/O pin
  17. GPIO6 - General-purpose I/O pin
  18. GPIO7 - General-purpose I/O pin
  19. XIN - Crystal oscillator input
  20. XOUT - Crystal oscillator output

Functional Features

  • UART mode: Supports full-duplex asynchronous serial communication.
  • SPI mode: Enables communication with devices using the Serial Peripheral Interface protocol.
  • I2C mode: Facilitates communication with devices using the Inter-Integrated Circuit protocol.
  • GPIO pins: Provides additional general-purpose input/output pins for controlling external devices.
  • Interrupt support: Generates an interrupt signal to the microcontroller upon specific events.

Advantages and Disadvantages

Advantages: - Versatile compatibility with multiple serial protocols - Low power consumption, suitable for battery-powered applications - Wide operating voltage range allows for flexibility in various systems - Small form factor package saves board space - Reliable performance ensures stable communication

Disadvantages: - Limited number of channels (only 1) - May require additional components for certain applications - Higher cost compared to simpler serial communication ICs

Working Principles

The SC16IS750IPW,112 acts as a bridge between a microcontroller and serial devices by converting the signals from one protocol to another. It receives data from the microcontroller and transmits it to the target device using the selected serial protocol (UART, SPI, or I2C). Similarly, it receives data from the target device and forwards it to the microcontroller. The IC also provides general-purpose input/output pins for controlling external devices and generates interrupts to notify the microcontroller of specific events.

Detailed Application Field Plans

The SC16IS750IPW,112 finds applications in various fields, including but not limited to: - Industrial automation - Internet of Things (IoT) devices - Robotics - Medical equipment - Consumer electronics - Automotive systems

In industrial automation, it can be used for communication between a microcontroller and sensors, actuators, or other control devices. In IoT devices, it enables connectivity with multiple sensors or modules. In robotics, it facilitates communication between the main controller and peripheral devices. In medical equipment, it can be utilized for data exchange between the microcontroller and various sensors or displays. In consumer electronics, it allows for communication between a microcontroller and external devices such as displays or memory cards. In automotive systems, it can be employed for communication between the main controller and different subsystems.

Detailed and Complete Alternative Models

Some alternative models to the SC16IS750IPW,112 include: - SC16IS740IPW,112: Similar functionality with fewer GPIO pins. - SC16IS752IPW,112: Similar functionality with two channels instead

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SC16IS750IPW,112 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SC16IS750IPW,112 in technical solutions:

  1. Q: What is SC16IS750IPW,112? A: SC16IS750IPW,112 is a UART (Universal Asynchronous Receiver/Transmitter) bridge IC that allows easy integration of UART devices into various applications.

  2. Q: What are the key features of SC16IS750IPW,112? A: Some key features include support for multiple UART channels, I2C/SPI interface, programmable baud rates, FIFO buffers, and interrupt capabilities.

  3. Q: How can SC16IS750IPW,112 be used in technical solutions? A: SC16IS750IPW,112 can be used to interface UART-based devices (such as sensors, modules, or peripherals) with microcontrollers or other systems that have I2C/SPI interfaces.

  4. Q: Can SC16IS750IPW,112 be used with both I2C and SPI interfaces? A: Yes, SC16IS750IPW,112 supports both I2C and SPI interfaces, providing flexibility in connecting with different host systems.

  5. Q: How many UART channels does SC16IS750IPW,112 support? A: SC16IS750IPW,112 supports up to 8 independent UART channels, allowing simultaneous communication with multiple UART devices.

  6. Q: Can SC16IS750IPW,112 handle high-speed data transfer? A: Yes, SC16IS750IPW,112 supports baud rates up to 5 Mbps, enabling high-speed data transfer between UART devices and the host system.

  7. Q: Does SC16IS750IPW,112 have any built-in FIFO buffers? A: Yes, SC16IS750IPW,112 has 64-byte receive and transmit FIFO buffers for each UART channel, which helps in efficient data handling.

  8. Q: Can SC16IS750IPW,112 generate interrupts? A: Yes, SC16IS750IPW,112 supports interrupt generation based on various events like data reception, transmission completion, or FIFO status.

  9. Q: Is SC16IS750IPW,112 compatible with different voltage levels? A: Yes, SC16IS750IPW,112 supports a wide range of supply voltages (1.8V to 5.5V), making it compatible with various systems.

  10. Q: Are there any development resources available for SC16IS750IPW,112? A: Yes, the manufacturer provides datasheets, application notes, and software libraries to assist in the integration and usage of SC16IS750IPW,112 in technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and implementation guidelines.