NXP USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
TDA8595J/N2,112
Tingnan ang Detalye DataSheets

TDA8595J/N2,112

Product Overview

Category

TDA8595J/N2,112 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in audio amplifier applications.

Characteristics

  • High-quality audio amplification
  • Low distortion
  • Wide frequency response range
  • Compact size
  • Efficient power consumption

Package

TDA8595J/N2,112 is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of TDA8595J/N2,112 lies in its ability to amplify audio signals with high fidelity and low distortion, making it suitable for various audio applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 8V - 18V
  • Output power: 20W per channel (stereo)
  • Total harmonic distortion: <0.1%
  • Signal-to-noise ratio: >90dB
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC (Power supply)
  2. GND (Ground)
  3. IN1 (Input 1)
  4. IN2 (Input 2)
  5. OUT1 (Output 1)
  6. OUT2 (Output 2)
  7. MUTE (Mute control)
  8. STBY (Standby control)

Functional Features

  • High-quality audio amplification: TDA8595J/N2,112 ensures accurate reproduction of audio signals with minimal distortion.
  • Mute and standby control: The built-in mute and standby features allow for convenient control of the amplifier's operation.
  • Thermal protection: This IC incorporates thermal protection mechanisms to prevent overheating and ensure safe operation.

Advantages and Disadvantages

Advantages

  • High audio fidelity
  • Compact size
  • Low distortion
  • Wide frequency response range
  • Efficient power consumption

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • Requires external heat sink for prolonged high-power operation

Working Principles

TDA8595J/N2,112 operates as a class D amplifier, utilizing pulse width modulation (PWM) techniques. It converts the input audio signal into a series of high-frequency pulses, which are then amplified and filtered to produce the final audio output.

Detailed Application Field Plans

TDA8595J/N2,112 finds applications in various audio systems, including: 1. Car audio systems 2. Home theater systems 3. Portable speakers 4. Multimedia devices 5. Professional audio equipment

Detailed and Complete Alternative Models

  1. TDA8595J/N2,111
  2. TDA8595J/N2,113
  3. TDA8595J/N2,114
  4. TDA8595J/N2,115

These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific applications.

In conclusion, TDA8595J/N2,112 is a high-quality audio amplifier IC that offers low distortion, wide frequency response, and efficient power consumption. Its compact size and versatile application field make it an ideal choice for various audio systems. However, it is important to consider its limited output power and the need for external heat dissipation in high-power scenarios.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TDA8595J/N2,112 sa mga teknikal na solusyon

  1. Question: What is the maximum power output of TDA8595J/N2,112?
    Answer: The maximum power output of TDA8595J/N2,112 is 4 x 50 W.

  2. Question: What is the operating voltage range for TDA8595J/N2,112?
    Answer: The operating voltage range for TDA8595J/N2,112 is 8 V to 18 V.

  3. Question: Can TDA8595J/N2,112 be used in automotive audio systems?
    Answer: Yes, TDA8595J/N2,112 is specifically designed for automotive audio applications.

  4. Question: What is the typical total harmonic distortion (THD) of TDA8595J/N2,112?
    Answer: The typical THD of TDA8595J/N2,112 is less than 0.05%.

  5. Question: Does TDA8595J/N2,112 have built-in short-circuit protection?
    Answer: Yes, TDA8595J/N2,112 features built-in short-circuit protection for enhanced safety.

  6. Question: Is TDA8595J/N2,112 compatible with both single-ended and differential inputs?
    Answer: Yes, TDA8595J/N2,112 supports both single-ended and differential inputs.

  7. Question: What is the recommended heat sink requirement for TDA8595J/N2,112?
    Answer: A suitable heat sink should be used to maintain optimal thermal performance.

  8. Question: Can TDA8595J/N2,112 operate in bridge-tied load (BTL) configuration?
    Answer: Yes, TDA8595J/N2,112 can be configured for bridge-tied load operation.

  9. Question: What is the typical quiescent current consumption of TDA8595J/N2,112?
    Answer: The typical quiescent current consumption of TDA8595J/N2,112 is 60 mA.

  10. Question: Are there any specific EMI/EMC considerations when using TDA8595J/N2,112?
    Answer: Proper EMI/EMC measures should be implemented as per the application requirements to ensure compliance with regulations.