ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
74LVT574MTC
Tingnan ang Detalye DataSheets

Encyclopedia Entry: 74LVT574MTC

Product Overview

Category

The 74LVT574MTC belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This IC is commonly used in digital electronics for storing and transferring data. It serves as a latch or register, allowing the storage and retrieval of binary information.

Characteristics

  • High-speed operation
  • Low power consumption
  • Compatibility with various logic families
  • Wide operating voltage range
  • Compact size

Package

The 74LVT574MTC is available in a small outline integrated circuit (SOIC) package. This package provides a compact and convenient form factor for easy integration into electronic circuits.

Essence

The essence of the 74LVT574MTC lies in its ability to store and transfer data reliably and efficiently. It acts as a fundamental building block in digital systems, enabling the manipulation and processing of binary information.

Packaging/Quantity

The 74LVT574MTC is typically sold in reels or tubes, containing multiple units per package. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Supply Voltage Range: 2.0V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 200MHz
  • Number of Flip-Flops: 8

Detailed Pin Configuration

The 74LVT574MTC features a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. CP (Clock Pulse)
  12. MR (Master Reset)
  13. Q0 (Flip-Flop Output 0)
  14. Q1 (Flip-Flop Output 1)
  15. Q2 (Flip-Flop Output 2)
  16. Q3 (Flip-Flop Output 3)
  17. Q4 (Flip-Flop Output 4)
  18. Q5 (Flip-Flop Output 5)
  19. Q6 (Flip-Flop Output 6)
  20. VCC (Supply Voltage)

Functional Features

The 74LVT574MTC offers the following functional features:

  • Data storage and transfer: The flip-flops within the IC allow for the storage of binary data and its subsequent transfer to other components.
  • Output enable control: The OE pin enables or disables the output, providing flexibility in controlling the flow of data.
  • Clock pulse synchronization: The CP pin triggers the transfer of data, ensuring synchronized operation with other components.
  • Master reset capability: The MR pin allows for the simultaneous reset of all flip-flops, clearing the stored data.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption contributes to energy efficiency.
  • Compatibility with various logic families allows for versatile integration.
  • Wide operating voltage range provides flexibility in different applications.
  • Compact size facilitates space-saving designs.

Disadvantages

  • Limited number of flip-flops may restrict the complexity of data storage and manipulation.
  • Sensitivity to voltage fluctuations may require additional voltage regulation measures.

Working Principles

The 74LVT574MTC operates based on the principles of flip-flops. It utilizes electronic circuits to store and transfer binary data. The clock pulse triggers the transfer of data from the input pins to the corresponding output pins. The output enable control allows for the activation or deactivation of the output, while the master reset clears all stored data.

Detailed Application Field Plans

The 74LVT574MTC finds applications in various digital systems, including but not limited to:

  1. Microcontrollers: Used for storing and transferring data between different components within a microcontroller.
  2. Communication Systems: Facilitates data buffering and synchronization in communication protocols.
  3. Memory Modules: Enables data storage and retrieval in memory modules such as RAM and ROM.
  4. Data Processing Units: Forms an integral part of data processing units, allowing for efficient data manipulation.

Detailed and Complete Alternative Models

  1. 74HC574: Similar functionality with a wider supply voltage range.
  2. 74LS574: Compatible with TTL logic family, suitable for legacy systems.
  3. 74ACT574: Offers faster operation and higher noise immunity.

These alternative models provide similar functionalities to

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 74LVT574MTC sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of 74LVT574MTC in technical solutions:

  1. Q: What is the function of the 74LVT574MTC? A: The 74LVT574MTC is an octal D-type flip-flop with 3-state outputs. It can store and transfer data in digital circuits.

  2. Q: What is the operating voltage range for the 74LVT574MTC? A: The 74LVT574MTC operates within a voltage range of 2.7V to 3.6V.

  3. Q: How many flip-flops are there in the 74LVT574MTC? A: The 74LVT574MTC consists of eight individual D-type flip-flops.

  4. Q: Can the 74LVT574MTC be used for bidirectional data transfer? A: Yes, the 74LVT574MTC supports bidirectional data transfer through its 3-state outputs.

  5. Q: What is the maximum clock frequency supported by the 74LVT574MTC? A: The 74LVT574MTC can operate at a maximum clock frequency of 200MHz.

  6. Q: Does the 74LVT574MTC have any built-in protection features? A: Yes, the 74LVT574MTC has built-in ESD (Electrostatic Discharge) protection on all inputs and outputs.

  7. Q: Can the 74LVT574MTC be cascaded to increase the number of flip-flops? A: Yes, multiple 74LVT574MTC chips can be cascaded together to increase the number of flip-flops in a circuit.

  8. Q: What is the power supply current consumption of the 74LVT574MTC? A: The power supply current consumption of the 74LVT574MTC is typically around 8mA.

  9. Q: Can the 74LVT574MTC be used in high-speed applications? A: Yes, the 74LVT574MTC is designed for high-speed operation and can be used in various high-speed applications.

  10. Q: Are there any specific layout considerations for using the 74LVT574MTC? A: Yes, it is recommended to follow the manufacturer's guidelines for proper PCB layout, including minimizing trace lengths and providing decoupling capacitors near the chip.

Please note that these answers are general and may vary depending on the specific application and requirements.