ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
74VHC4052MTC
Tingnan ang Detalye DataSheets

Encyclopedia Entry: 74VHC4052MTC

Product Overview

Category

The 74VHC4052MTC belongs to the category of integrated circuits (ICs) and specifically falls under the group of multiplexers/demultiplexers.

Use

This IC is commonly used in electronic circuits for signal routing and selection purposes. It allows multiple input signals to be directed to a single output or vice versa, based on the control inputs.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with both CMOS and TTL logic levels

Package

The 74VHC4052MTC is available in a small-sized TSSOP (Thin Shrink Small Outline Package) package. This package offers space-saving advantages and ease of integration into various electronic devices.

Essence

The essence of the 74VHC4052MTC lies in its ability to efficiently handle signal routing and selection tasks within electronic circuits. It provides a reliable and compact solution for managing multiple input/output connections.

Packaging/Quantity

The 74VHC4052MTC is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • On-State Resistance: 70Ω (typical)
  • Control Input Voltage: CMOS/TTL compatible
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74VHC4052MTC has a total of 16 pins, which are assigned specific functions as follows:

  1. INHIBIT (Control Input)
  2. VEE (Negative Supply Voltage)
  3. VCC (Positive Supply Voltage)
  4. COMMON (Common Terminal)
  5. INPUT/OUTPUT 1
  6. INPUT/OUTPUT 2
  7. INPUT/OUTPUT 3
  8. INPUT/OUTPUT 4
  9. INPUT/OUTPUT 5
  10. INPUT/OUTPUT 6
  11. INPUT/OUTPUT 7
  12. INPUT/OUTPUT 8
  13. GND (Ground)
  14. SELECT 1 (Control Input)
  15. SELECT 2 (Control Input)
  16. ENABLE (Control Input)

Functional Features

  • Bidirectional signal routing capability
  • Low propagation delay
  • High noise immunity
  • Wide operating voltage range allows compatibility with various systems
  • ESD protection on inputs and outputs for enhanced reliability

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient signal routing
  • Low power consumption contributes to energy efficiency
  • Compatibility with both CMOS and TTL logic levels offers versatility in circuit design
  • Small package size facilitates integration into space-constrained applications

Disadvantages

  • Limited number of input/output channels compared to some other multiplexer/demultiplexer ICs
  • On-state resistance may introduce slight signal attenuation

Working Principles

The 74VHC4052MTC operates based on the principle of analog multiplexing/demultiplexing. It utilizes control inputs to select the desired input/output channel, allowing signals to pass through or be blocked accordingly. The IC's internal circuitry ensures minimal signal distortion and reliable switching between channels.

Detailed Application Field Plans

The 74VHC4052MTC finds application in various electronic systems, including but not limited to: - Audio/video equipment - Communication devices - Data acquisition systems - Industrial automation - Test and measurement instruments

In audio/video equipment, it can be used for channel selection, audio routing, or video switching. In communication devices, it enables signal multiplexing/demultiplexing for efficient data transmission. In data acquisition systems, it facilitates the selection of input sources for accurate data sampling. In industrial automation and test/measurement instruments, it aids in signal routing and control.

Detailed and Complete Alternative Models

  • CD4052BE: CMOS-based dual 4-channel analog multiplexer/demultiplexer
  • SN74HC4052N: High-speed CMOS-based dual 4-channel analog multiplexer/demultiplexer
  • ADG408BRZ: Precision CMOS-based 8-channel analog multiplexer/demultiplexer
  • MAX4617CSE+: Low-voltage, low on-resistance, 8-channel analog multiplexer/demultiplexer

These alternative models offer similar functionality to the 74VHC4052MTC and can be considered as substitutes based on specific requirements and compatibility with existing circuit designs.

Word count: 614 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 74VHC4052MTC sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of 74VHC4052MTC in technical solutions:

  1. Q: What is the purpose of the 74VHC4052MTC? A: The 74VHC4052MTC is a dual 4-channel analog multiplexer/demultiplexer used for routing analog signals in electronic circuits.

  2. Q: What is the operating voltage range of the 74VHC4052MTC? A: The 74VHC4052MTC operates within a voltage range of 2V to 5.5V.

  3. Q: How many channels does the 74VHC4052MTC have? A: The 74VHC4052MTC has two independent 4-channel multiplexers, providing a total of 8 channels.

  4. Q: Can the 74VHC4052MTC handle both analog and digital signals? A: Yes, the 74VHC4052MTC can handle both analog and digital signals, making it suitable for various applications.

  5. Q: What is the maximum frequency at which the 74VHC4052MTC can operate? A: The 74VHC4052MTC can operate at frequencies up to 200MHz.

  6. Q: How does the 74VHC4052MTC select between different channels? A: The 74VHC4052MTC uses control pins to select the desired channel by activating the corresponding switches.

  7. Q: Can the 74VHC4052MTC be used for bidirectional signal routing? A: No, the 74VHC4052MTC is unidirectional and can only route signals from input to output.

  8. Q: What is the on-resistance of the 74VHC4052MTC? A: The on-resistance of the 74VHC4052MTC is typically around 100 ohms.

  9. Q: Can the 74VHC4052MTC handle high-speed digital signals? A: Yes, the 74VHC4052MTC has a fast switching speed and can handle high-speed digital signals.

  10. Q: Are there any specific precautions to consider when using the 74VHC4052MTC? A: It is important to ensure that the voltage levels applied to the 74VHC4052MTC do not exceed its specified operating range to prevent damage. Additionally, proper decoupling capacitors should be used for stable operation.

Please note that these answers are general and may vary depending on the specific application and requirements.