ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
BSR50
Tingnan ang Detalye DataSheets

BSR50 Product Overview

Introduction

The BSR50 is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of the BSR50, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: The BSR50 is primarily used to regulate voltage in electronic circuits, ensuring a stable output voltage regardless of input fluctuations.
  • Characteristics: It is known for its high precision, low dropout voltage, and low quiescent current, making it suitable for various applications.
  • Package: The BSR50 is available in a compact and heat-dissipating TO-220 package.
  • Essence: Its essence lies in providing reliable voltage regulation for electronic devices.
  • Packaging/Quantity: The BSR50 is typically packaged individually and is available in various quantities to meet different production needs.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 1.2V to 16V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.5V at 1A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BSR50 features a standard three-pin configuration: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated output voltage.

Functional Features

  • High Precision: The BSR50 offers precise voltage regulation, ensuring stability in electronic systems.
  • Low Dropout Voltage: It maintains a low dropout voltage even at higher output currents, enhancing efficiency.
  • Low Quiescent Current: With a low quiescent current, it minimizes power consumption during standby or idle modes.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current compared to higher-rated regulators
  • Higher dropout voltage compared to some specialized low-dropout regulators

Working Principles

The BSR50 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output. When the input voltage fluctuates, the regulator responds to ensure a consistent output voltage.

Detailed Application Field Plans

The BSR50 finds extensive use in various applications, including: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems - Embedded systems

Detailed and Complete Alternative Models

  • BSR60: A higher-rated version with increased output current capacity.
  • BSR40: A lower-rated version suitable for applications with lower power requirements.
  • BSR55: Offers enhanced precision and lower dropout voltage for more demanding applications.

In conclusion, the BSR50 is a reliable voltage regulator with precise regulation, making it suitable for a wide range of electronic applications.

[Word Count: 455]

Note: The remaining content to reach the required word count will be added in the next response.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng BSR50 sa mga teknikal na solusyon

  1. What is BSR50?

    • BSR50 is a type of high-strength steel commonly used in technical solutions for its excellent mechanical properties and weldability.

  2. What are the key mechanical properties of BSR50?

    • BSR50 exhibits high tensile strength, good ductility, and excellent toughness, making it suitable for demanding technical applications.

  3. How does BSR50 compare to other types of steel?

    • BSR50 offers superior strength and toughness compared to many other types of steel, making it a preferred choice for technical solutions requiring high performance.

  4. In what technical solutions is BSR50 commonly used?

    • BSR50 is often utilized in the construction of heavy machinery, industrial equipment, and structural components where strength and durability are crucial.

  5. What welding methods are compatible with BSR50?

    • BSR50 can be welded using common methods such as arc welding, MIG welding, and TIG welding, providing flexibility in fabrication processes.

  6. Does BSR50 require any special heat treatment?

    • BSR50 typically does not require post-weld heat treatment, simplifying the manufacturing process and reducing production costs.

  7. Is BSR50 corrosion-resistant?

    • BSR50 has moderate corrosion resistance, but additional protective coatings or treatments may be necessary for applications exposed to harsh environments.

  8. Can BSR50 be machined easily?

    • BSR50 can be machined using standard machining techniques, although its high strength may require appropriate tooling and cutting parameters.

  9. What are the temperature limitations of BSR50?

    • BSR50 maintains its mechanical properties at both low and elevated temperatures, making it suitable for applications exposed to varying thermal conditions.

  10. Are there any specific safety considerations when working with BSR50?

    • When handling BSR50, standard safety precautions for working with steel materials should be followed, including proper ventilation and personal protective equipment (PPE) as needed.