ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
CAT9554HV4I-GT2
Tingnan ang Detalye DataSheets

CAT9554HV4I-GT2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital I/O Expander
  • Characteristics: High Voltage, 16-bit I/O expander, I2C interface
  • Package: HVQFN-24
  • Essence: The CAT9554HV4I-GT2 is a high-voltage digital I/O expander designed for various applications that require additional input/output pins. It provides 16 programmable I/O pins and communicates with the host microcontroller through the I2C interface.
  • Packaging/Quantity: The CAT9554HV4I-GT2 is available in a HVQFN-24 package and is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage: 3V to 5.5V
  • Maximum Output Voltage: 18V
  • Maximum Input Voltage: 6V
  • Maximum Output Current: 25mA per channel
  • Operating Temperature Range: -40°C to +85°C
  • I2C Bus Frequency: Up to 400kHz
  • Address Select Pins: 3 address select pins for device addressing

Detailed Pin Configuration

The CAT9554HV4I-GT2 has a total of 24 pins. The pin configuration is as follows:

  1. SDA - I2C Serial Data Input/Output
  2. SCL - I2C Serial Clock Input
  3. A0 - Address Select Bit 0
  4. A1 - Address Select Bit 1
  5. A2 - Address Select Bit 2 6-21. P0-P15 - Programmable I/O Pins
  6. VDD - Power Supply
  7. GND - Ground
  8. RESET - Reset Input

Functional Features

  • 16 programmable I/O pins with high-voltage capability
  • Bidirectional I/O pins with programmable pull-up resistors
  • Individual pin configuration for input or output mode
  • Interrupt output pin for signaling changes in input states
  • Software reset function to restore default settings

Advantages and Disadvantages

Advantages: - High-voltage capability allows for versatile applications - I2C interface enables easy integration with microcontrollers - Programmable pull-up resistors simplify circuit design - Interrupt output pin enhances system responsiveness

Disadvantages: - Limited number of I/O pins (16) - Requires external components for voltage level translation

Working Principles

The CAT9554HV4I-GT2 operates by receiving commands from the host microcontroller through the I2C bus. The microcontroller can configure each I/O pin as an input or output and set the desired logic levels. The device supports bidirectional communication, allowing both reading and writing of pin states. It also provides interrupt functionality to notify the microcontroller of any changes in the input states.

Detailed Application Field Plans

The CAT9554HV4I-GT2 finds applications in various fields, including but not limited to:

  1. Industrial Automation: Control and monitoring of industrial equipment
  2. Automotive Electronics: Interface expansion for automotive control systems
  3. Home Automation: Integration with smart home devices for enhanced functionality
  4. Consumer Electronics: Input/output expansion for consumer electronic devices
  5. Internet of Things (IoT): Integration into IoT devices for sensor interfacing

Detailed and Complete Alternative Models

  1. MCP23017 - 16-bit I/O expander with I2C interface
  2. PCA9538 - 8-bit I/O expander with I2C/SMBus interface
  3. MAX7313 - 16-bit I/O expander with SPI interface
  4. TCA6416A - 16-bit I/O expander with I2C interface and interrupt output

These alternative models offer similar functionality to the CAT9554HV4I-GT2 and can be considered based on specific application requirements.

Word count: 443 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng CAT9554HV4I-GT2 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of CAT9554HV4I-GT2 in technical solutions:

  1. Q: What is CAT9554HV4I-GT2? A: CAT9554HV4I-GT2 is a high-voltage I/O expander integrated circuit (IC) that provides additional input/output pins for microcontrollers or other digital devices.

  2. Q: What is the operating voltage range of CAT9554HV4I-GT2? A: The operating voltage range of CAT9554HV4I-GT2 is typically between 2.3V and 5.5V.

  3. Q: How many I/O pins does CAT9554HV4I-GT2 have? A: CAT9554HV4I-GT2 has 8 I/O pins, which can be configured as either inputs or outputs.

  4. Q: Can CAT9554HV4I-GT2 handle high-voltage signals? A: Yes, CAT9554HV4I-GT2 is designed to handle high-voltage signals up to 18V, making it suitable for various industrial applications.

  5. Q: How can I communicate with CAT9554HV4I-GT2? A: CAT9554HV4I-GT2 uses an I2C interface for communication with a microcontroller or other devices.

  6. Q: Can I use multiple CAT9554HV4I-GT2 ICs in my project? A: Yes, you can connect multiple CAT9554HV4I-GT2 ICs together on the same I2C bus to expand the number of available I/O pins.

  7. Q: Is CAT9554HV4I-GT2 compatible with 3.3V microcontrollers? A: Yes, CAT9554HV4I-GT2 is compatible with both 3.3V and 5V microcontrollers, thanks to its wide operating voltage range.

  8. Q: Can I use CAT9554HV4I-GT2 in automotive applications? A: Yes, CAT9554HV4I-GT2 is suitable for automotive applications as it can handle high-voltage signals and has a wide operating temperature range.

  9. Q: Does CAT9554HV4I-GT2 have built-in pull-up resistors? A: Yes, CAT9554HV4I-GT2 has programmable internal pull-up resistors that can be enabled or disabled for each I/O pin.

  10. Q: Are there any application examples for CAT9554HV4I-GT2? A: Yes, some common applications of CAT9554HV4I-GT2 include LED matrix control, keypad scanning, GPIO expansion, and general-purpose I/O interfacing.

Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of your technical solution.